Prop strike...

D

dasuto247

Members +
How do I restore this to planes? Such as the OH models. Belly landing, flying too low etc, props just keep on spinning.
 
From my testing the fuselage contact point set the prop stike. The thing is you can lower the fuselage contact point or when you bell land you will be nose up sitting on the fuselage contact point that is 1.5 or 2 feet from the belly.
 
Hi dasuto247,

Just move the vertical position of the scrape points to 0.

Rembember that when you get a prop strike the plane will blow up.

Regards,
B24Guy
 
Hi dasuto247,

In the aircraft cfg file.

[contact_points]
//0 Class
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio (0=Undamped, 1=Critically Damped)
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type


Regards,
B24Guy
 
The B24 Guy said:
Hi dasuto247,

In the aircraft cfg file.

[contact_points]
//0 Class
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio (0=Undamped, 1=Critically Damped)
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type


Regards,
B24Guy
Click to expand...

[contact_points]
//0 Class
//1 Longitudinal Position (feet)
//2 Lateral Position (feet)
//3 Vertical Position (feet)
//4 Impact Damage Threshold (Feet Per Minute)
//5 Brake Map (0=None, 1=Left, 2=Right)
//6 Wheel Radius (feet)
//7 Steer Angle (degrees)
//8 Static Compression (feet) (0 if rigid)
//9 Max/Static Compression Ratio
//10 Damping Ratio (0=Undamped, 1=Critically Damped)
//11 Extension Time (seconds)
//12 Retraction Time (seconds)
//13 Sound Type
//14 Airspeed limit for retraction (KIAS)
//15 Airspeed that gear gets damage at (KIAS)
point.0= 1, -18.00, 0.00, -3.35, 3200.0, 0, 0.50,180.0, 0.25, 2.5, 0.90, 1.0, 4.00, 0, 0, 200 //tail wheel
point.1= 1, 1.80, -5.93, -7.65, 2200.0, 1, 1.35, 0.0, 0.54, 2.5, 0.76, 5.5, 4.50, 2, 0, 200 //left wheel
point.2= 1, 1.80, 5.93, -7.65, 2200.0, 2, 1.35, 0.0, 0.54, 2.5, 0.76, 5.5, 4.50, 3, 0, 200 //right wheel
point.3= 2, 0.00, -20.00, -1.25, 800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 5 //left wing
point.4= 2, 0.00, 20.00, -1.25, 800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 6 //Right wing
point.5= 2, -20.25, 0.00, -0.60, 800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 9 //tail
point.6= 2, 6.41, 0.00, -1.50, 800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 4 //belly
point.7= 2, 3.45, -5.43, -4.20, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 5 //left gull
point.8= 2, 3.45, 5.43, -4.20, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 6 //right gull
point.9= 2, -5.00, -0.10, -2.50, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 5
point.10= 2, -5.00, 0.10, -2.50, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 6
point.11= 2, 7.00, -0.10, -2.00, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 5
point.12= 2, 7.00, 0.10, -2.00, 1800.0, 0, 0.00, 0.0, 0.00, 0.0, 0.00, 0.0, 0.00, 6

Which numbers under vertical position do I change to 0?
 
Allen said:
attachment.php


https://msdn.microsoft.com/en-us/library/cc526949.aspx#mozTocId836373
Click to expand...

lol don't forget, still new to a lot of this.Learning as I go..

Yes, I see number 3(vertical position) .However there are multiple numbers, not sure which one to change.
 
Take point.0= 1, -18.00, 0.00, -3.35, 3200.0, 0, 0.50,180.0, 0.25, 2.5, 0.90, 1.0, 4.00, 0, 0, 200 //tail wheel

After the = is 1. The 1 is the Class. -18.00 Longitudinal Position. 0.00 is Lateral Position. -3.35 is the Vertical Position.
 
You must log in or register to reply here.
Back
Top