• There seems to be an up tick in Political commentary in recent months. Those of us who are long time members of the site we know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religiours commentary out of the fourms.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politicion will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment amoung members. It is a poison to the community. We apprciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

RAZBAM proudly presents: The AV-8B Harrier II Plus for FSX

Most likely, you put the gear up, but the landing lights switch is still on, we´ll fix it in the coming patch, thanks for the heads up

Prowler
 
Just messing about I came up with this ficticious paint - does anyone want it berfore i delete it from my PC?

ficticiousRAF.jpg
 
I'm having some difficulties with the Harrier. I was hoping to post my problems on the RAZBAM forum, but have been informed that my account is "inactive", and I can't see a contact address.<o:p></o:p>
I am also having the problem with the aircraft not recognizing the throttle of my Thrustmaster Warthog joystick, and I am also not able to turn on the HUD (am I missing something?). The Harrier looks great, but so far I haven't been able to get it of the ground, which is a little bit frustrating after anticipating it for so long!

Regards,
Ian.
 
O.k., I've found the answer to both the HUD and the throttle problem. The HUD was my fault (I hadn't noticed the off setting on the brightness control!) <o:p></o:p>
The solution to the throttle lies in FSUIPC, and is caused by having a duel throttle set up.<o:p></o:p>
What you need to do is go into FSUIPC's axis assignment, set aircraft specific and "axis throttle set", not "axis throttle set 1 or 2" like you might have used normally.<o:p></o:p>
It seems that with the Harrier you can't assume that throttle 1 will work your single engine!<o:p></o:p>
I hope this helps others with this problem.<o:p></o:p>
<o:p> </o:p>
Regards,<o:p></o:p>
Ian.
 
Barnes said:
Working on this one



wip-1446.jpg
Click to expand...

When I saw you question about the fictitious paint, I thinj to suggest to go with this one !
Very good idea ! Not enough time to test your paints till now, but it will come, with priority on the arctic, of course.
And the screens look great !

Congratulations for the speed you mastered the paintkit !
 
Hi

I just tried the link and it downloaded with no problem.

I have also uploaded all my paints to the SOH libary so you could get it from there if its still problem
 
IanHenry said:
O.k., I've found the answer to both the HUD and the throttle problem. The HUD was my fault (I hadn't noticed the off setting on the brightness control!) <o:p></o:p>
The solution to the throttle lies in FSUIPC, and is caused by having a duel throttle set up.<o:p></o:p>
What you need to do is go into FSUIPC's axis assignment, set aircraft specific and "axis throttle set", not "axis throttle set 1 or 2" like you might have used normally.<o:p></o:p>
It seems that with the Harrier you can't assume that throttle 1 will work your single engine!<o:p></o:p>
I hope this helps others with this problem.<o:p></o:p>
<o:p> </o:p>
Regards,<o:p></o:p>
Ian.
Click to expand...

Sorry, won't help here as I don't have a full version of FSUIPC.
Actually found my throttle will advance from 66% to around 71%, but as soon as I reach the halfway point in the axis it acts like it reverses and goes back to 66% at full.
EDIT: This actually occurs with any axis I try to assign for the throttle.
Also the throttle animation is not connected at all to any throttle movement.

To Zeus.
As I said earlier, my throttles are mapped to engine throttles via the axis for throttles on the throttle peripheral. :icon_lol:
 
Dain Arns said:
Sorry, won't help here as I don't have a full version of FSUIPC.
Actually found my throttle will advance from 66% to around 71%, but as soon as I reach the halfway point in the axis it acts like it reverses and goes back to 66% at full.
EDIT: This actually occurs with any axis I try to assign for the throttle.
Also the throttle animation is not connected at all to any throttle movement.

To Zeus.
As I said earlier, my throttles are mapped to engine throttles via the axis for throttles on the throttle peripheral. :icon_lol:
Click to expand...

I'm no expert,and I'm assuming that you have set your controls via FSX's control options. The first thing that I would look at is how you set your throttles in the axis panel, if you have one of your joystick throttles set to engine one, and the other set to engine two (which is the logical way to do it), try setting one of your (joystick) throttles to plain old throttle.<o:p></o:p>
Next have a look at your sensativity and null zone settings, then finaliy re check the calibration for your joystick.<o:p></o:p>
<o:p> </o:p>
Good luck,<o:p></o:p>
Ian.
 
Dain Arns said:
Sorry, won't help here as I don't have a full version of FSUIPC.
Actually found my throttle will advance from 66% to around 71%, but as soon as I reach the halfway point in the axis it acts like it reverses and goes back to 66% at full.
EDIT: This actually occurs with any axis I try to assign for the throttle.
Also the throttle animation is not connected at all to any throttle movement.

To Zeus.
As I said earlier, my throttles are mapped to engine throttles via the axis for throttles on the throttle peripheral. :icon_lol:
Click to expand...

Just arrived. The VTOL module needs that you use the general (all engines) Throttle axis, instead of a specific one. You can do this either via FSUIPC or by using FSX's control settings, which is the one that I use.
 
ZEUS67 said:
Just arrived. The VTOL module needs that you use the general (all engines) Throttle axis, instead of a specific one. You can do this either via FSUIPC or by using FSX's control settings, which is the one that I use.
Click to expand...

After years of using multiple throttles, you miss the obvious sometimes, I guess. :blind:
 
Oddly, I have my throttles set up in FSUIPC.. as Axis throttle 1 and Axis throttle 2. Throttle 2 seems to be what is controlling the aircraft throttle.

-Damien
 
Time for some bug fix announcements:
Brick Wall bug killed, it was a stupid snafu from us, it was a development tool that went into the release version (this fixes the excess bank non-stall issue as well)
"robotic" feel, killed as well, a side effect of "brick wall" bug (which, lol, happened to be a tool! :D )
Pitch issue, fixed, yeah..you guessed, "Brick Wall"(<--gona name that one bug of the year)
Sounds issue, engine spooling down sound when transitioning and/or in VTOL mode, this one was a snafu made by ME during product compilation, as well as the cockpit sounds, all of these are fixed BUT we´ll upgrade the sound package once Inny gets his done and ready (yeah you´ll need to redownload the whole product once again).
Water and fuel issue, fixed as well as the loadout manager bug
Landing lights visible when gear is up, fixed
We are including a new feature, which is the NVG´s, will be a hotas feature
see-thru bug in the exterior model (wing meets the fuselage) issue fixed
HUD bug, working on it at the moment.

Patch delivery date, between Sunday night and Monday night, it´s a complete re-build
Thanks for your patience

Best regards

Prowler
 
You must log in or register to reply here.
Back
Top