• There seems to be an up tick in Political commentary in recent months. Those of us who are long time members of the site we know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religiours commentary out of the fourms.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politicion will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment amoung members. It is a poison to the community. We apprciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

RAZBAM proudly presents: The AV-8B Harrier II Plus for FSX

Fast, simple responses - thanks so much. :ernae:

Have to scrape a few more shekels ... should pick this up soon.

Cheers,

DL
 
RAZBAM AV-8B Harrier II Plus Mk1A is up in the store, current customers have their accounts reset to 0 so they can re-download the product. MK1A addresses all the documented bugs.Thanks for your patience.If you´re a new customer, your purchase is up to date.

Best regards
Prowler
 
Just downloaded the new version and awaiting FSX to start up! zzzz

Edit - just had quick flight and it seems very much better - well done Razbam team.
 
Logged in,looked at my purchases and see the Harrier but its the same size,403 megs as the first release. I am pretty sure its the same one after downloading it and now I only have 1 download left.

Where do you find the updated version? I also do not see it in the downloads/updates so I am lost here.
 
JIMJAM said:
Logged in,looked at my purchases and see the Harrier but its the same size,403 megs as the first release. I am pretty sure its the same one after downloading it and now I only have 1 download left.

Where do you find the updated version? I also do not see it in the downloads/updates so I am lost here.
Click to expand...

There is no separate patch, the whole installer has been updated, you need to download the whole thing again
Best regards
Prowler
 
Can't create an account

HI,

I want to purchase this aircraft but when I try and create a new account I get a page that asks for my namd and date of birth. I fill these in but nothing happens. I get an error message on the bottom saying "Done but with errors on the page", tried about 6 times, all with the same problem.

Any suggestions please?

Thanks Ron
 
Is there any chance the transition to forward flight (and back to hover) has been smoothed? I would really like to buy this ship since it's visually beautiful, but the flight model has to be able to reproduce that or it will be a buzz kill...
 
ronvking said:
HI,

I want to purchase this aircraft but when I try and create a new account I get a page that asks for my namd and date of birth. I fill these in but nothing happens. I get an error message on the bottom saying "Done but with errors on the page", tried about 6 times, all with the same problem.

Any suggestions please?

Thanks Ron
Click to expand...

Have managed to sort this out. For info, in case anyone else has a hiccup. I first tried creating the account via a WIN XP/IE8 setup and it only showed the first three fields on the page. Later tried via a dual boot on WIN 7/IE8 and that gave me the whole page to fill in.

Now learning how to fly this beast. Very pleased with the purchase.

Cheers Ron
 
"That´s already fixed"

I spent 2 hours last night and one today trying to transition from ff to hover and I disagree.
Instead of the "brickwall" now its like getting hit with a wave. Forget the nozzle position, at 90 knots I get a rapid nose up no matter what I do. Accufeel has nothing to do with it. Disabled. Ive tried everything of and now want to see some vids of someone smoothly,consistantly going from ff to vtol. I have gotten it down on a carrier and can hover/land this plane but its not pretty and very unrealistic. In real life every other Harrier would be lost.
Also the hover / throttle control is dam near impossible. The spool up is so slow the Harrier turns into a yo yo of frustration. VTOL take offs work fine but I cannot go from ff to transion to hover without being totally wreckless and see no rhyme or reason to the flight modeling other than at 90 crap happens.
Not much being said about this Harrier good or bad so If I am alone then I will quit griping and simply write it off and see what happens. If others are having these issues speak up so it can be looked at again.
How about release the actual procedures on how to fly the thing correctly. That will take out any guess work. I hope I am proved wrong and its a issue on my end cause this is one sweet looking plane. But after 3 hours of trying to convince myself its my bad stick work amplified by a almost total lack of materials, I am pretty sure its the FM.

Edit- Currently test flying again trying to produce a repeatable,safe procedure for transition. IN my case, on take off vtol,nozzles straight down, I have to hold the stick full forward,parking brakes on and go full power, After lift off and the initial "bucking" stick neutral. Same with ff to transition. Slow to 130 or so then quickly move nozzles 85 or so and get ready for 90. As 90 approaches,stick forward to counter the abrupt nose pitch up. After that, its a matter of slowing it down and very precise throttle control. Like helis, if your vertical descent is to quick, no amount of thrust can prevent you from stopping it and smacking the ground. Luckily the Harrier has some beefy landing gear.
 
Yes, I can say that you're not alone, I've exactly the same problems (even if I find that there are some strange movements on take off also). The new version is a huge improvement, but it's still very frustrating because VTOL... And I do my tests with a light airplane, and no wind... Maybe is it related to our configuration but I don't think so :

Indeed, few things to mention to understand why :

- when trying to hovering, the indicated speed on the hud never goes under 60 knts or so...
- can you test this : in normal flight, full throttles, go up, at a great angle, until your speed goes to 0, and see what happens. In my case, the plane has a totally abnormal behavior, for example the model begins to flash pointing alternatively in various directions...
- I must pause while I was doing a vertical take off, at 500 ft, no wind, flaps on STOL, etc... And the plane was still moving, changing very slowly it's orientation...

One last point : is it normal that the plane moves while nozzles are down ?

So. We discuss this also on the support forum, where the guys are very present...

This Harrier is the best Harrier we've had on model and artwork, systems, and all the normal flight... I thought it will be a winner, Razbam has show his skills on his recent planes, and I think it's very sad that in this very important aspect he is worse than the others... But I think that we must be patient, because they chose to make a new code for the STOL, and that's a good point, but they must not stop their efforts now !
 
JIMJAM and Wapanomi

Try these nozzle positions for the model, in reality whilst on the ground the aircraft sits at approximately a 5 degree nose up attitude landing and take off in the Stol and Vstol mode the nozzles should never have to go past 82 degrees, going past this setting is for braking and airshows. For normal rolling take offs and landings the nozzles are set to 10 degrees.

Bruce
 
Thanks, these are valuable informations !

But I can assure you that the "wave" described by JimJam is not nozzle related. It occurs while transitionning, and before the nozzles are down...

And on the other hand, the problem of thrust mentionned above is also a great difficulty. But may I conclude that you've none of these bahaviour ?
 
"This Harrier is the best Harrier we've had on model and artwork, systems, and all the normal flight... I thought it will be a winner, Razbam has show his skills on his recent planes, and I think it's very sad that in this very important aspect he is worse than the others... But I think that we must be patient, because they chose to make a new code for the STOL, and that's a good point, but they must not stop their efforts now !"

Agreed. The is one well done aircraft but the vtol is broken. My expectations were never to recreate the real world Harrier's abilty. That said, I have spent hours at least trying to be able to get around its limitations and at least be able to come up with procedures so I can operate the Harrier with some consistency. I love a challenging aircraft. Remember the old Cloud9 F-104? The standard procedure if you got into a stall was to EJECT! Todays A2a's you can fry and engine in minutes. Love it.
The real Harrier pilots have very strict procedures and operational constraints and from the vids you can see it. Very deliberate,planned ahead,practiced operations. I feel more like a test pilot flying the Harrier on its first day however its every flight.

But yeah, as is there are 2 nozzle positions, zero and 80 something. 3 airspeeds,zero, under 90 and over 90. The weight and balance I have no clue. I cut the fuel so I gain access the manager. Click on the vtol fuel load then restart the plane. BTW the manager has a print about something about being rear..... but its cut off so I assume it tail heavy?? I have flown at 3% fuel for ever and even so have had the plane drop from a 500ft hover like a rock. Full power still was unable to arrest the descent.

Sorry for the long post, must be the gallon sized coffee cup I use. I own alot of the Razbam planes and like all their stuff. It took alot of courage for them to take a stab at it for many have failed. They could have jumped on the P-51,f-15,f-16, F whatever bandwagon so I commend them. So Raz its almost there....... From a wall to a wave......... So close...... I am willing to wait.
 
Imust be lucky - since they updated the product i have been flying and hovering with no probs.

Well said JimJam - they have been very brave to try to use FSX, which can hardly cope with helicopter flight, to do this.
 
I agree with JimJam, I think that Razbam have done a very good job on the Harrier, not perfect, because I think there are still some problems with the flight model,but a damn good effort overall.<o:p></o:p>
Does anyone else have a problem with the airbrake, which I find very difficult to retract, or is it meant to be out when it’s on the ground, or in the STOL/VTOL mode?<o:p></o:p>
I hope Razbam continue to develop the model, which I think; in time could become one of the very best FSX aircraft available. Keep up the good work chaps.:applause:

Regards,
Ian.
 
You must log in or register to reply here.
Back
Top