• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

This mission looks like FUN!!!!!

Navy Chief

Navy Chief

Senior Member
I just downloaded this, and will be trying it. I have seen another Youtube video of an airliner landing on this runway before, but never THIS close to a catastrophe!!!

Anyway, it really looks challenging!!!!

The real landing:

http://www.youtube.com/watch?v=CJoXMcehrYo

The file:

<table width="100%" align="center" bgcolor="#aaccee" border="0" cellpadding="2" cellspacing="2"><tbody><tr><td colspan="2" align="left">[FONT=verdana, sans-serif]Category: Flight Simulator X - Missions[/FONT] </td> </tr> <tr> <td width="*" align="left"> [FONT=verdana, sans-serif]New! [/FONT] [FONT=verdana, sans-serif]The Most Dangerous Airports: Toncontin [/FONT]</td> <td align="right" nowrap="nowrap"> <!-- --> </td> </tr> </tbody></table> [FONT=verdana, sans-serif]Images related to this file:
[/FONT]

[FONT=verdana, sans-serif] [/FONT] [FONT=verdana, sans-serif] File Description:
I have created the next in, The Most Dangerous Airport Mission Series: namely Toncontin. The missions are real and hectic, both for you and the aircraft. The flight is a scheduled Continental Airlines flight. The Toncontin Intl is rated by some as the most dangerous airport, due to it's approach, it has a 180�° left bank, just before landing on runway 02. The airport is not so famous for this approach and numerous accidents have closed the airport in 2008 but it has been reopened after a serious upgrade. The setting are as follows: Time and weather are set as Online Day Weather and Stormy FSX Day weaqther. Due to the runway 02 approach not being programmed into FSX, ignore the ATC vectoring and fly the approach indicated on the GPS and mission pointer. The approach is adapted from the real approach charts. [/FONT]
[FONT=verdana, sans-serif]
[/FONT] <table width="50%" align="center" bgcolor="#aaccee" border="0"><tbody><tr> <td width="25%">[FONT=verdana, sans-serif]Filename:[/FONT]</td> <td width="75%">[FONT=verdana, sans-serif]toncontin.zip[/FONT]</td> </tr> <tr> <td width="25%">[FONT=verdana, sans-serif]License:[/FONT]</td> <td width="75%">[FONT=verdana, sans-serif]Freeware[/FONT]</td> </tr> <tr> <td width="25%">[FONT=verdana, sans-serif]Added:[/FONT]</td> <td width="75%">[FONT=verdana, sans-serif]24th February 2010[/FONT]</td> </tr> <tr> <td width="25%">[FONT=verdana, sans-serif]Downloads:[/FONT]</td> <td width="75%">[FONT=verdana, sans-serif]101[/FONT]</td> </tr> <tr> <td width="25%">[FONT=verdana, sans-serif]Author:[/FONT]</td> <td width="75%">[FONT=verdana, sans-serif]Robbie Albers[/FONT]</td> </tr> <tr> <td width="25%">[FONT=verdana, sans-serif]Size:[/FONT]</td> <td width="75%">[FONT=verdana, sans-serif]16284kb[/FONT]</td></tr></tbody></table>
 
An update, of sorts.

I have spent the entire day, trying to get this mission even set up, so I can try to fly it, but without success.

The aircraft for the mission is the POSKY 757-200. The author of the file suggests the file to get was at Simviation (oh joy), and it took me hours to download it, naturally. Finally got it, and installed it though. But I STILL get an "initialization failure". Additionally, the author recommends installing a mesh for South America, called "dem76m_centralamerica.zip". I can't find this file. I read on a Flightsim.com forum that it was on FSGenesis site, but could not find it there, or anywhere else, for that matter.

Can anyone provide some advice here on how to fix this? I emailed the author with the same questions, and will post again if/when he replies.

Thanks.

NC
 
Hi Folks

NC -
Robbie persists in issuing these incorrectly configured packages. :isadizzy:

To fix both the paths and missing flightplans -

Create a folder called "Most_Dangerous_Airports"
move all Robbie's folders & files into there.



Tontonic Day
Look in the folder named Tontonic Day
Using Notepad open the .flt file
scroll to near the end of the file,
find & replace -
Code: 
[ResourcePath]
Path=.\Missions\My Missions\Toncontin\Tontonic Day
[ObjectFile]
File=Miami Intl
[GPS_Engine]
Filename=C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Missions\My Missions\Toncontin\Tontonic Day\IFR Miami Intl to Toncontin Intl
With -
Code: 
[ObjectFile]
File=Miami Intl
[GPS_Engine]
Filename=IFR Miami Intl to Toncontin Intl
Tontonic Online Day
Look in the folder named Tontonic Online Day
As above
Replace -
Code: 
[ResourcePath]
Path=.\Missions\My Missions\Toncontin
[ObjectFile]
File=Miami Intl
[GPS_Engine]
Filename=C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Missions\My Missions\Toncontin\IFR Miami Intl to Toncontin Intl
With -
Code: 
[ObjectFile]
File=Miami Intl
[GPS_Engine]
Filename=IFR Miami Intl to Toncontin Intl
HTH
ATB
Paul
 
Still no go.

I made all the changes, but whenever I select the mission, I get an initialization failure. Something to do with the aircraft type. I tried changing the type listed in the .flt file, but all that does is change the aircraft type listed in the initialization failure....

This is friggin' maddening. Grrrrrrrrrrrr...........
 
Hi Folks

NC -
Please post the exact text of the init failure.
and the line from the mission .flt file -
Code: 
[Sim.0]
Sim=TitleOfYourAirplaneRepaint
ATB
Paul
 
Here are pictures of the initialization failure notices.

The aircraft listed in the mission, as released by Robbie, is the POSKY 757. I need to add that, although I went to the POSKY site, and checked their Download section, I do not see the Base Aircraft package listed. There are Effects files, Winglet Updates, and Virtual Cockpit Textures only......

In Robbie's Readme text file, he mentions a specific 757 file download, found on Simviation, which I did download/install. I tried modifying the .flt plan to reflect that aircraft, but had no effect. The same error occurs.

The first error, listing the Delta Airlines OC POSKY Boeing 757-200 is the one Robbie has in the mission flt plan

The second error pictured, B757-200-PW-PW2043 is the one suggested by Robbie as the one HE downloaded, but I get the same error message as before.

NC
 
Hi,

I did not have the Posky 757 either, so I did what Paul Suggested on the Path to the Flight Plan and changed the mission.flt file located in \Program Files\Microsoft Games\Microsoft Flight Simulator X\Missions\My Missions\toncontin\Tontonic Day\ - Folder -

I changed this line from -

[Sim.0]
Sim=Delta Airlines OC POSKY Boeing 757-200

to

[Sim.0]
Sim=Boeing 737-800 Paint2

and it works for me -

Cheers !!
 
I found the problem. I had been copying/pasting information from the "SIM" line in the aircraft.cfg file, vs the "TITLE" line....and then pasting into the Mission.FLT file.

Now everything works.

THANKS for the posts, because that gave me the information on where I was screwing up!!!

NC
 
Hi

Please contact me directly using the email adress provided in the readme mission file, sothat I can fix the persistant incorrect configuration.

Robbie

BASys said:
Hi Folks

NC -
Robbie persists in issuing these incorrectly configured packages. :isadizzy:

To fix both the paths and missing flightplans -

Create a folder called "Most_Dangerous_Airports"
move all Robbie's folders & files into there.



Tontonic Day
Look in the folder named Tontonic Day
Using Notepad open the .flt file
scroll to near the end of the file,
find & replace -
Code: 
[ResourcePath]
Path=.\Missions\My Missions\Toncontin\Tontonic Day
[ObjectFile]
File=Miami Intl
[GPS_Engine]
Filename=C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Missions\My Missions\Toncontin\Tontonic Day\IFR Miami Intl to Toncontin Intl
With -
Code: 
[ObjectFile]
File=Miami Intl
[GPS_Engine]
Filename=IFR Miami Intl to Toncontin Intl
Tontonic Online Day
Look in the folder named Tontonic Online Day
As above
Replace -
Code: 
[ResourcePath]
Path=.\Missions\My Missions\Toncontin
[ObjectFile]
File=Miami Intl
[GPS_Engine]
Filename=C:\Program Files\Microsoft Games\Microsoft Flight Simulator X\Missions\My Missions\Toncontin\IFR Miami Intl to Toncontin Intl
With -
Code: 
[ObjectFile]
File=Miami Intl
[GPS_Engine]
Filename=IFR Miami Intl to Toncontin Intl
HTH
ATB
Paul
Click to expand...
 
Hi Folks

Robbie -
Please see your email inbox.

I've included a zipped 'staging area' folder structure,
plus some other bits.

Look forward to your future missions.

HTH
ATB
Paul
 
You must log in or register to reply here.
Back
Top