Trouble with gc dkm z-32

B

Bill Kestell

Charter Member
OK ... I''m at a loss.

I have used all my dped knowledge to move the bomb damage fire effect to the proper positions but still get these two "ghost" fires out ahead of the bow.

Every other ship I have worked on seems to have the verticle dashed dividing line indicating "center" at the mid-point of the ship. Not this one. The "center" line is at about the 4/5ths forward portion of the ship ... at "A" turret roughly.

I have moved both the hull and deck boxes accordingly but still get these ghost fires ... and at he rear 1/4 of the ship ... a bomb hit results in a water column rather than the explosion I would expect to see if the bomb "hit" something solid rather than having nothing solid there and just "hitting" the water.

Further, I have the "blueprints" setting on the next to smallest magnification (barely workable at that setting) and I can't possibly move any further to the right with hull or deck boxes ... I'm at the right edge of my screen now!

This is really XXXXing me off because this is the only ship that I just can't bend to my will. Any old GC guys around who remember this pretty little witch ... or any ship guys out there?

Thanks in advance for any help or suggestions.
 
Ghost Fires...?

Howdy Mr. K;

I'm sure you've already thought of this... but I just gotta ask.

Have you semi-coloned out ALL the damage box info lines, and then added them back one box at a time ?

I KNOW it's a PITA, but this may be the only way to figure out which / what / where to work on...

SC
:kilroy:
 
Hmmmm....the default boxes seem grossly disproportionate to the wireframe image of the model in blueprint view.

0036.jpg


The Z-10 is the same way....when you see this degree of disparity between the boxes and the wireframe its hard to determine which is the truth. It makes the ship a much BIGGER target, but i can't believe the shipbuilders intended this.
 
Yeah ... I know it's wierd. I may give the semi-colon route a shot even if it is a PITA ... only because I can't handle a chalenge that I can't ovecome. It's just plain UNAMERICAN!:faint:
 
bearcat241 said:
Hmmmm....the default boxes seem grossly disproportionate to the wireframe image of the model in blueprint view.

0036.jpg


The Z-10 is the same way....when you see this degree of disparity between the boxes and the wireframe its hard to determine which is the truth. It makes the ship a much BIGGER target, but i can't believe the shipbuilders intended this.
Click to expand...

I just opened this in DPED, and it's very strange that if you check measures, the DD model is only about 34 meters long...

Something is wrong here, but I'm not sure what: the boxes look like they are the right size (~136 m.) , but the 3D model seems to be tiny. It could be a DPED error reading the model, but it's the first time I see something like this. Until now it just either opened a model or not, but never seen it opening one with a wrong size.


:help::help::help::help:
 
You must log in or register to reply here.
Back
Top