-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
-
IMPORTANT DOWNLOADING INFORMATION - ALL MEMBERS PLEASE READ
Please see this thread for updates. Update Thread
SOH ADMINISTRATION
Vultee A-31 Vengeance
- Thread starter wolfi
- Start date
kelticheart
Charter Member
Wolfi be careful!
Wolfi,
the test pack you distributed to us test pilots has a wonderful bird in it! The model is perfect, it has good fps performance and its animations are stunning!
I love the rear gunner/navigator animation and the 3d radial engine is wonderfully modelled. I swear the VC is best I ever saw! You applied magic to it, because I always hated the darkness and very limited forward view of VCs, while this one is bright, luminous under different light angles and it offers an ample forward view! This Vengeance might very well be the only plane I'll ever fly in her VC!
She flies very well, too, a good flight model overall. Keep in mind I only fly in "hard" mode.
But be careful: the prop disc you included in the pack is not the one I attached to the thread earlier. It's over a year old and it has errors that I corrected this summer.
Please, do not use that 2013 prop disc in your final release, but the one I am attaching below!
It's the same disc I attached before, I only renamed it according to your prop disc filename in the pack.
Better yet: delete every prop disc texture of mine you have that I sent you before August/September of this year!
Cheers!
KH
Wolfi,
the test pack you distributed to us test pilots has a wonderful bird in it! The model is perfect, it has good fps performance and its animations are stunning!
I love the rear gunner/navigator animation and the 3d radial engine is wonderfully modelled. I swear the VC is best I ever saw! You applied magic to it, because I always hated the darkness and very limited forward view of VCs, while this one is bright, luminous under different light angles and it offers an ample forward view! This Vengeance might very well be the only plane I'll ever fly in her VC!
She flies very well, too, a good flight model overall.
Keep in mind I only fly in "hard" mode.But be careful: the prop disc you included in the pack is not the one I attached to the thread earlier. It's over a year old and it has errors that I corrected this summer.
Please, do not use that 2013 prop disc in your final release, but the one I am attaching below!
It's the same disc I attached before, I only renamed it according to your prop disc filename in the pack.
Better yet: delete every prop disc texture of mine you have that I sent you before August/September of this year!
Cheers!
KH
wolfi
SOH-CM-2026
update
It will be a real cfs2 aircraft: Breakable, bullet holes, multi LOD and VC. When I first decided to make this aircraft, I thought what an ugly plane, but now it’s maybe the best aircraft I ever build. Through the building process I like it more and more, especially when Captain Kurt’s textures came into work, they give the plane the live I like.
For all who wait for this aircraft, the Model itself is ready; I’m in the process to add the last 38 bullet holes to the aircraft. There are a few minor fixes to do (assigning parts to the correct part)
I think this aircraft will be ready within two weeks from now.
Wolfi
The picture shows the aircraft in a very unpleasant situation, but it also shows one of the breaking parts and a few bullet holes.
It will be a real cfs2 aircraft: Breakable, bullet holes, multi LOD and VC. When I first decided to make this aircraft, I thought what an ugly plane, but now it’s maybe the best aircraft I ever build. Through the building process I like it more and more, especially when Captain Kurt’s textures came into work, they give the plane the live I like.
For all who wait for this aircraft, the Model itself is ready; I’m in the process to add the last 38 bullet holes to the aircraft. There are a few minor fixes to do (assigning parts to the correct part)
I think this aircraft will be ready within two weeks from now.
Wolfi
The picture shows the aircraft in a very unpleasant situation, but it also shows one of the breaking parts and a few bullet holes.
Attachments
wolfi
SOH-CM-2026
RAAF 24. Vultee Vengeance Squadron Tsili Tsili
A few links about the Vultee Vengeance
RAAF 24. Vultee Vengeance Squadron at Tsili Tsili airfield
http://www.awm.gov.au/collection/OG0200/
http://www.awm.gov.au/collection/OG0201/
http://www.awm.gov.au/collection/OG0260/
wolfi
A few links about the Vultee Vengeance
RAAF 24. Vultee Vengeance Squadron at Tsili Tsili airfield
http://www.awm.gov.au/collection/OG0200/
http://www.awm.gov.au/collection/OG0201/
http://www.awm.gov.au/collection/OG0260/
wolfi
View attachment 15589View attachment 15590View attachment 15591View attachment 15592
A few more pics for you.
A few more pics for you.
wolfi
SOH-CM-2026
Close to ready!
Close to ready! I do the last test flights; have to adjust the LOD models a bit, writing the readme and upload text. I think the Vultee Vengeance will be uploaded this week.
Right here: Special thanks to Captain Kurt for his work on the textures, DP and air files.
Thanks Kurt
wolfi
Close to ready! I do the last test flights; have to adjust the LOD models a bit, writing the readme and upload text. I think the Vultee Vengeance will be uploaded this week.
Right here: Special thanks to Captain Kurt for his work on the textures, DP and air files.
Thanks Kurt
wolfi
Attachments
wolfi
SOH-CM-2026
just uploaded
I just uploaded the aircraft to the Sim Outhouse warbirds library
have fun
wolfi
http://www.sim-outhouse.com/sohforums/local_links.php?catid=55
I just uploaded the aircraft to the Sim Outhouse warbirds library
have fun
wolfi
http://www.sim-outhouse.com/sohforums/local_links.php?catid=55
wolfi
SOH-CM-2026
RAAF_Vultee_Vengeance.zip
A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - Other
Description: This aircraft was built with FSDS2.4
The aircraft is for CFS2. It is multilod, breakable and comes with damage textures and bullet holes effect.
Special thanks are going to:
Captain Kurt for his work on the textures, the 2d Cockpit and the DP and air file and to Kelticheart for the prop texture.
The folder AIRCRAFT/RAAF Vultee Vengeance contains the complete aircraft with the standard model having the rear canopy open and close as the landing gear retracts and extends.
Vengeance Zip_1: Has an optional model version with a different rear canopy animation.You can control the rear canopy with the Concorde nose keys (you have to assign two keys, one to open and one to close the rear canopy)
Vengeance Zip_2: Has a FS2000 model that is visible in DPED (DP file editor) to use if you want to modify the .DP file.
This model MDL is my work and should only be available from Sim-outhouse.
To check it out, rate it or add comments, visit RAAF_Vultee_Vengeance.zip
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category CFS 2 Aircraft - Other
Description: This aircraft was built with FSDS2.4
The aircraft is for CFS2. It is multilod, breakable and comes with damage textures and bullet holes effect.
Special thanks are going to:
Captain Kurt for his work on the textures, the 2d Cockpit and the DP and air file and to Kelticheart for the prop texture.
The folder AIRCRAFT/RAAF Vultee Vengeance contains the complete aircraft with the standard model having the rear canopy open and close as the landing gear retracts and extends.
Vengeance Zip_1: Has an optional model version with a different rear canopy animation.You can control the rear canopy with the Concorde nose keys (you have to assign two keys, one to open and one to close the rear canopy)
Vengeance Zip_2: Has a FS2000 model that is visible in DPED (DP file editor) to use if you want to modify the .DP file.
This model MDL is my work and should only be available from Sim-outhouse.
To check it out, rate it or add comments, visit RAAF_Vultee_Vengeance.zip
The comments you make there will appear in the posts below.
kelticheart
Charter Member
A masterpiece!
Wolfi,
A thousand thanks to both you and Captain Kurt for his impeccable, historical textures!
Cheers!
KH
Wolfi,
you created a true masterpiece!
A thousand thanks to both you and Captain Kurt for his impeccable, historical textures!
Cheers!
KH
AussieMan, this one might work, its for FS9, so might be a better chance. I don't have it so can't try it for you.
Wolfi, fantastic looking plane, looking forward to trying it out.
Jamie
Blood_Hawk23
Charter Member
I think if you asked Wolfi he could make it for FSX. Or maybe allow some one to do it.
Wolfi, Outstanding work. CK, the textures are first rate. Awesome work Gents, Awesome!!!
Wolfi, Outstanding work. CK, the textures are first rate. Awesome work Gents, Awesome!!!
wolfi
SOH-CM-2026
Vultee Vengeance for FSX and FS2004
The problem isn’t the MDL, it’s just a bit extra work, and I have to remove the bullet holes and have to change animations. The real problem is the FSX setup (FSX / FS2004 air-file, Panel and gauges), if someone is willing to do this work, I will make the MDL for FSX and FS2004. But I will remark the aircraft is made for the senior sim CFS2, so it hasn’t all the possibilities from FSX and FS2004, it’s made to look good in CFS2!
I started this model as a quick build until Captain Kurt came with his textures
and forced me to detail this model more than planned.
I have a second model (Grumman F3F) in the pipeline which is planned as FSX and FS2004 version and of course for CFS2 also.
wolfi
The problem isn’t the MDL, it’s just a bit extra work, and I have to remove the bullet holes and have to change animations. The real problem is the FSX setup (FSX / FS2004 air-file, Panel and gauges), if someone is willing to do this work, I will make the MDL for FSX and FS2004. But I will remark the aircraft is made for the senior sim CFS2, so it hasn’t all the possibilities from FSX and FS2004, it’s made to look good in CFS2!
I started this model as a quick build until Captain Kurt came with his textures
and forced me to detail this model more than planned.I have a second model (Grumman F3F) in the pipeline which is planned as FSX and FS2004 version and of course for CFS2 also.
wolfi
yeah, it's all MY fault. LOL 
wolfi
SOH-CM-2026
Vultee Vengeance for FSx
As I said, the MDL isn’t the problem…
If someone will do the rest (air file, sound, gauges) this would be available soon
wolfi
As I said, the MDL isn’t the problem…
If someone will do the rest (air file, sound, gauges) this would be available soon
wolfi
