Blue Devil,
How do you install a mirror?
msfossey
Well...
I have done a few things to spruce up the 'ol A/C.
CFS2:
1. SITUATIO/defair.flt and defgnd.flt
...
[Window.1]
...
ViewType=Normal
ViewMode=Virtual Cockpit
ViewDir=Foreward
CockpitZoom=000.64
VirtualZoom=000.64
...
2. CFS2.cfg (w/ Logitech X3D Pro stick)
...
[JOYSTICK_MAIN {0C1B8180-A28C-11D8-8001-444553540000}]
...
BUTTON_DOWN_EVENT_00=FIRE_ALL_GUNS
BUTTON_DOWN_REPEAT_00=1
BUTTON_UP_EVENT_00=STOP_ALL_GUNS
BUTTON_DOWN_EVENT_01=VIEW_FORWARD_UP
BUTTON_DOWN_EVENT_02=VIEW_FORWARD_LEFT
BUTTON_DOWN_EVENT_03=VIEW_FORWARD_RIGHT
BUTTON_DOWN_EVENT_04=VIEW_FORWARD
BUTTON_DOWN_EVENT_05=VIEW_REAR_UP
BUTTON_DOWN_EVENT_06=FLAPS_DECR
BUTTON_DOWN_EVENT_07=PROP_PITCH_INCR
BUTTON_DOWN_REPEAT_07=10
BUTTON_DOWN_EVENT_08=FLAPS_INCR
BUTTON_DOWN_EVENT_09=PROP_PITCH_DECR
BUTTON_DOWN_REPEAT_09=10
BUTTON_DOWN_EVENT_10=ORDNANCE_CYCLE
BUTTON_DOWN_EVENT_11=ORDNANCE_RELEASE
...
A/C: (in this case, DB Corsair)
1. AIRCRAFT/F4U1A_CORSAIR/aircraft.cfg
...
[Views]
eyepoint= -6.240, 0.00, 3.54
...
2. AIRCRAFT/F4U1A_CORSAIR/PANEL/panel.cfg
...
[VIEWS]
VIEW_FORWARD_EYE=0.00, 0.00, 0.00 // 3Dc.3 PanelView
VIEW_FORWARD_DIR=15.00, 0.00, 0.000 // 3Dc.3 PanelView
VIEW_REAR_UP_EYE=0.00, 0.00, 0.000 // 3Dc.3 PanelView
VIEW_REAR_UP_DIR=-15.00, 0.00, 180.000 // 3Dc.3 PanelView
VIEW_FORWARD_UP_EYE=0.000, 0.00, 0.100 // 3Dc.3 PanelView
VIEW_FORWARD_UP_DIR=-10.00, 0.000, 0.000 // 3Dc.3 PanelView
VIEW_FORWARD_LEFT_EYE=0.00, 0.00, 0.000 // 3Dc.3 PanelView
VIEW_FORWARD_LEFT_DIR=0.00, 0.00, -45.000 // 3Dc.3 PanelView
VIEW_FORWARD_RIGHT_EYE=0.00, 0.00, 0.000 // 3Dc.3 PanelView
VIEW_FORWARD_RIGHT_DIR=0.00, 0.00, 45.000 // 3Dc.3 PanelView
...
This gives you default:
1. .64 zoom 3D Cockpit.
2. 15 deg. down forward panel view.
3. level Left and right front quarter views.
4. 15 deg. up-back view.
5. 10 deg. up w/ 4 in. lean-in MIL gunsight view.
6. All views are "sticky", so you can pan from there.
7. All views are on the top buttons of the stick around the hat, and the gunsight view is on the thumb button.
Just select a view and "bump" the hat to adjust.
Works like lightnin', ....and kills just as quick.
PS. Forward view w/ 15 deg. down works great for T&L's as well. The level Quarter views let ya look out, and the front view lets you look in. (~ level in take-off or landing config.)
Enjoy.
Pps. the last one's for you, HC...