Open the ship .cfg and scroll down to the flight deck section. in takeoff_start, change the -50 (minus 50) to -80 or -100 to set your start point further back on the flight deck. Don't forget to delete the .cdp.
Devildog,
You can actually make it minus -100, I tried it on the Illustrious. By the way, use WEP when possible and drop a notch of flaps. It helps them stay airborne, but you still get the Tora Tora Tora effect when the first plane leaves the deck. Just hang tight and keep the elevators up!
Yep already do both. These are in the README for the missions. There is a modification text out here somewhere about those British carriers.
Changes are:
[flight_deck_section]
; this section defines the control points the
; AI (and LSO) use to steer towards the flight deck
width=32
length=245
takeoff_start=2,21,-119 (On the Yorktown class carrier I used change -119 to -100).
takeoff_stop=-2,21,120
landing_start=0,500,-5000
landing_touch_down=0.1920005,12.321,-81.536003
landing_stop=0.1920005,12.321,0
I "stand" on the brakes, hit WEP and when the RPMs level let go of the brakes, just before end of deck I hit one notch of flaps and just as soon as I hit the end of deck hit G key to pull up the gear. I now only get wet about one in ten takeoffs.
Also, the main fuel tanks on the Firefly and Corsair Mk II are not accurate. I checked the actual fuel tank capacities in both and used AirEd to change the values to proper fuel capacity. This is a must or you cannot make it back to the ships. I will include the air files in the upload. If anyone knows how to add external tanks to the Firefly DP, please do so. According to the historic documents I have read, they were equipped with 2 externals of about 54 US Gal each on the outer 1/3 of the wings. That extra 108 US Gallons would be VERY beneficial on these missions. The Corsair Mk II also does not have an option for drop tanks with bombs and rockets and should have external drop tank available.
Lastly, I am finished with the initial building and need some testers. You can send me an email from the CP section, or just PM me with your email. As soon as someone else tells me they are good to go, I will upload them. There are 2 operations with 3 versions of mission 1 and 1 version of mission 2.
BTW: Wonderful informational site:
http://www.airvectors.net/idx_vw2.html