I did not take it as such; just wanted to clarify that my role was to get her going, did not have the data or time to focus on an accurate flight model (as I mentioned in an earlier post).
-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
yet another bouncer
- Thread starter hurricane3
- Start date
Here's a two bladed prop!
Cees
Cees
hurricane3
SOH-CM-2025
runway showing through
I noticed after applying the fixes by Milton ,on the takeoff roll you can see two slices of runway showing through the cockpit on the takeoff roll ,they go away after liftoff. Not a big deal ,but what causes this?
I noticed after applying the fixes by Milton ,on the takeoff roll you can see two slices of runway showing through the cockpit on the takeoff roll ,they go away after liftoff. Not a big deal ,but what causes this?
hurricane3
SOH-CM-2025
forgot
I forgot to say this happens in the VC mode
I forgot to say this happens in the VC mode
Screenshot please. Are you talking from Spot view, 2D cockpit, VC?
EDIT: Okay ... screenshot please. Is this with Cees panel updates or the original? I do not see any issues with Cees' panel update.
EDIT: Okay ... screenshot please. Is this with Cees panel updates or the original? I do not see any issues with Cees' panel update.
hurricane3
SOH-CM-2025
with Cees update
I applied Cees update but this was before I did that.It was after I applied your update ,and pretty sure it only happens in VC. You get the same effect if a flying boats cockpit is below water level.I was told it's just a bug with FS9.
I don't know how to make a screenshot, but on take off there are narrow bands left and right that flash and you can see the runway thriugh them It's nothing I can't live with ,you have your hands full with the Grummans , so don't worry about it.
I applied Cees update but this was before I did that.It was after I applied your update ,and pretty sure it only happens in VC. You get the same effect if a flying boats cockpit is below water level.I was told it's just a bug with FS9.
I don't know how to make a screenshot, but on take off there are narrow bands left and right that flash and you can see the runway thriugh them It's nothing I can't live with ,you have your hands full with the Grummans , so don't worry about it.
Not seeing that here sir ... sounds like a video issue of some sort.
To make a screenshot, (If you do not have "Snapper", a freeware download), simply:
1. Press the "Print Scr" key (This copies to the clipboard)
2. Open MSPaint or any graphics program, and Click Edit, Paste.
There you have it.
Name and Save that as a "files of type" .jpg file.
Now come to SOH, create the message, Manage attachments, add attachments, browse to file and upload it.
Save the message and post it.
To make a screenshot, (If you do not have "Snapper", a freeware download), simply:
1. Press the "Print Scr" key (This copies to the clipboard)
2. Open MSPaint or any graphics program, and Click Edit, Paste.
There you have it.
Name and Save that as a "files of type" .jpg file.
Now come to SOH, create the message, Manage attachments, add attachments, browse to file and upload it.
Save the message and post it.
hurricane3
SOH-CM-2025
maybe my vidio driver
I'd say maybe it's my driver or some other vidio issue but of over 400 planes installed the only other one's are the Lohner flying boats that do this . I was told by someone here that was because of a bug in FS9 caused by part of the cockpit being below the water line ,which of course can't be the case here.
The plane sit's normally from outside and this flashing runway thingys only show on the takeoff roll,I imagine they would show when taxing also,but since this computer is so old and I have to shut down backround programs by going to msconfig and rebooting I don't really feel like doing that now.
Thanks for your concern,I'am sorry I bothered you with it (not being scarcastic) .My bet is for some reason on my computer it's a contact point thing and I though maybe it would be an easy fix.I don't have MS paint or snapper and don't realy feel like messing with those now my anixity and depression problem are getting the best of me today ,so don't worry about it.
Thankyou so much for trying to help.
I'd say maybe it's my driver or some other vidio issue but of over 400 planes installed the only other one's are the Lohner flying boats that do this . I was told by someone here that was because of a bug in FS9 caused by part of the cockpit being below the water line ,which of course can't be the case here.
The plane sit's normally from outside and this flashing runway thingys only show on the takeoff roll,I imagine they would show when taxing also,but since this computer is so old and I have to shut down backround programs by going to msconfig and rebooting I don't really feel like doing that now.
Thanks for your concern,I'am sorry I bothered you with it (not being scarcastic) .My bet is for some reason on my computer it's a contact point thing and I though maybe it would be an easy fix.I don't have MS paint or snapper and don't realy feel like messing with those now my anixity and depression problem are getting the best of me today ,so don't worry about it.
Thankyou so much for trying to help.
hurricane3
SOH-CM-2025
Just to let you know
I took a deep breath and flew some without shutting down backround programs ,made 3 flights before I lost my textures. Three were dirt strips from Germany and there were no flashes with the runway showing. Tried the default Seattle but by then I lost my textures so couldn't be sure if it did it with that airport or not. Must only happen with certain airports or maybe it fixed it's self, anyway thats all I can handle for now ,thankyou sir for you help.
I took a deep breath and flew some without shutting down backround programs ,made 3 flights before I lost my textures. Three were dirt strips from Germany and there were no flashes with the runway showing. Tried the default Seattle but by then I lost my textures so couldn't be sure if it did it with that airport or not. Must only happen with certain airports or maybe it fixed it's self, anyway thats all I can handle for now ,thankyou sir for you help.
I'm not seeing it here either. A screenshot would be helpful.
Cees
Cees
Where are Milton's and my improved files for the 109?
Cees
Cees
Strangely enough, I think I still have all those changes.
I am attaching the FM and the panel.cfg here. See if this is what you are looking for.
Oooh! Here are the attachments! I replied to your PM that you forgot them!
Thank you!
Cees
Thank you!
Cees
Milton,
I get a php file only, no zip, so there is nothing to be downloaded. 
Can other people download these files?
Cees
I get a php file only, no zip, so there is nothing to be downloaded. Can other people download these files?Cees
Milton,
Cees
I can download them okay.
PM me your email address and I will send that way.
Duckie
SOH-CM-2024
Milton,
Cees
Hey Cees, go ahead and download the php file then change the php extension to zip and that should do it. Works for me.
Steve
Cess, just out of curiosity, what browser are you using? I'm on IE10 and I get a zip file just by clicking the links.
Just FYI, I sent the files to Cees by Email yesterday. 
I figured as much, but it will be handy to have the info as a reference if another user has the same problem.