A Lockheed "Rounder"

[AussieMan]

I would love to be able to add the 'poon to my Lockheed hangar. I already have the Hudson, Super Electra and the Lodestar for FSAddon. Unfortunately in P3D V2.5 all the click spots have disappeared and therefore will not be in my hangar much to my disappointment.

 

[Milton Shupe]

It was the WiP that I crashed... I'm still not used to FSX ground textures and didn't realize that I was trying to set down on an embankment until it was too late. (hey, from a distance, it looked like some flat ground just before the threshold & I was trying to land it like a DC-2 which I've been flying quite a bit lately) Note to self, keep some power on while coming in over the fence...

I've redone the Empire Express paint and have it up and going as a release version PV-2C now instead of the WiP D.

Uh, quick dumb question. On the civilian 2C, where are the upper gun port textures located? On the WiP, I just painted the nose and covered them up that way. With the release version, the ports are bare metal.

(also my Navy crew mods work fine with the release version and I'll include them in the upload as extra bits)

Hmmm, not sure what happened there Willy. That map got hosed. Just redid it; will be in the first update.

They will be mapped in place so just paint over the holes assuming the blanks are there.

 

[Milton Shupe]

I would love to be able to add the 'poon to my Lockheed hangar. I already have the Hudson, Super Electra and the Lodestar for FSAddon. Unfortunately in P3D V2.5 all the click spots have disappeared and therefore will not be in my hangar much to my disappointment.

Yes, can't do anything there to help you Sir. FS9 stuff will not work due to using the (from a P3D perspective) old deprecated xml syntax no longer supported in P3D after v1.4. Your only hope is that someone steps up to convert these models to FSX Native.

 

[Milton Shupe]

If anyone has any issues to report, I will be finishing up some minor fixes over the weekend and hope to post them by Monday.

Meanwhile, it feels good to go Gold.

Thanks Matt Wynn (I think) for this rendering.

 

[Firekitten]

I would love to be able to add the 'poon to my Lockheed hangar. I already have the Hudson, Super Electra and the Lodestar for FSAddon. Unfortunately in P3D V2.5 all the click spots have disappeared and therefore will not be in my hangar much to my disappointment.

Not a huge problem, a pair of throttle quadrants and the accompanying buttons and a few shortcuts, I haven't touched any of the Harpoon's vc clickspots really in FSX... never do.

 

[huub vink]

A big thank you for all who contributed to this lovely model!


The 19-10 over the Waddenzee.


The 19-10 crossing the dunes near the Wassenaarseslag (Something like 15km/10miles from my home.)

I don't know whether this movie was already posted before, but it shows the Harpoons arriving in the Netherlands. They were flown from the US to the Netherlands. I hope the link will work outside the Netherlands

http://www.beeldengeluid.nl/en/medi...ine-luchtvaart-dienst-arriveren-op-valkenburg

Cheers,
Huub

 

[Milton Shupe]

You are most welcome Huub; it is our pleasure Sir.

Thanks for posting the YouTube clip; that was great.

I hope you enjoy flying the PV-2, and look forward to the PV-1 Vega Ventura, or B-34

 

[Rallymodeller]

Got a little distracted from the Canadian repaints...

N54549 (L-18-40 c/n 2008) was used as Transocean's company hack for a number of years into the mid-50s. TALOA is my go-to airline when I am flying in CalClassic's Calirfornia scenery. My paint mojo is back!

 

[t.creed]

nice scheme on the Lodestar..looks nice..!!!

rgds
t creed

 

[Milton Shupe]

nice scheme on the Lodestar..looks nice..!!!

rgds
t creed

+1 Yes Sir! That looks great!

 

[AussieMan]

Not a huge problem, a pair of throttle quadrants and the accompanying buttons and a few shortcuts, I haven't touched any of the Harpoon's vc clickspots really in FSX... never do.

Thankfully I have the CH Eclipse yoke as well as the throttle quadrant. I have things set up for elevator trim, rudder trim and aileron trim. On top of that on the yoke I also have a button programmed to start the engine and on the quadrant a button is assigned to start the engines, up for left engine and down for the right engine.

I have installed the Harpoon into P3D and will see how things work for me.

 

[Milton Shupe]

Thankfully I have the CH Eclipse yoke as well as the throttle quadrant. I have things set up for elevator trim, rudder trim and aileron trim. On top of that on the yoke I also have a button programmed to start the engine and on the quadrant a button is assigned to start the engines, up for left engine and down for the right engine.

I have installed the Harpoon into P3D and will see how things work for me.

Ah great! {fingers crossed}

Not sure what you can about the electrical switches ... may need to add a popup for that.

 

[Milton Shupe]

For those who would like it, especially P3D users, attached is a Panel folder update that adds a popup for the Electrical Panel to control batteries, pumps, lights, AP, etc.

Just unzip and add the folder contents to your Harpoon panel folder.

 

[wbuchart]

Wow, another great job from Milton and team SOH! Thanks guys!! and while I will be flying this for some time to come I am also still looking forward to thew PV-1!

 

[manfredc3]

I have been following this thread for quite some time.

Looking back, Milton and Co have taken this Lockheed family through quite an amazing transition.

This afternoon I finally managed to pull myself away from other commitments, and installed the Harpoon and Lodestar in FSX.

It was a a lot of fun flying them out of KCMW.

I only ran in to one problem; The navigation lights will only turn on when pressing the "L" key on the keyboard. flipping the switches in the vc, nor my physical switches on my home built panel turned on the lights. To make it even stranger, the switches in the cockpit do move from off to on and back, using the mouse clickspot, and when flipping my physical switches in my home built panel, The tooltips show the switches in either position.
All other functions/switches are working fine

But that little hick up certainly did not take away any of the fun I had with these wonderful birds.

 

[Milton Shupe]

I have been following this thread for quite some time.

Looking back, Milton and Co have taken this Lockheed family through quite an amazing transition.

This afternoon I finally managed to pull myself away from other commitments, and installed the Harpoon and Lodestar in FSX.

It was a a lot of fun flying them out of KCMW.

I only ran in to one problem; The navigation lights will only turn on when pressing the "L" key on the keyboard. flipping the switches in the vc, nor my physical switches on my home built panel turned on the lights. To make it even stranger, the switches in the cockpit do move from off to on and back, using the mouse clickspot, and when flipping my physical switches in my home built panel, The tooltips show the switches in either position.
All other functions/switches are working fine

But that little hick up certainly did not take away any of the fun I had with these wonderful birds.

Hi Manfred3

Thank you for the comments and for the feedback.

It looks like I mis-coded the Lights section to "Recognition" instead of Nav lights.

Simply change the following two lines in the aircraft.cfg lights section:

[LIGHTS]
// types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
// 6=Taxi, 7=Recognition, 8=Wing, 9=Logo, 10=Cabin
light.0 =3, -1.278000, -36.752000, 3.664000, fx_navred //left wing
light.1 =3, -1.278000, 36.752000, 3.664000, fx_navgre //right wing

 

[Milton Shupe]

Wow, another great job from Milton and team SOH! Thanks guys!! and while I will be flying this for some time to come I am also still looking forward to thew PV-1!

Thank you Sir; we have always appreciated your support. I hope you get many hours of pleasure in flying the PV-2's.

 

[Milton Shupe]

I have modified the Electrical Panel popup for the FSX Harpoon and FSX Fire Tankers.

I moved the location top right and increased the popup size vertically.

The popup covers most of the electrical clickables in the VC for those who prefer a fast, simple electrical panel popup to get started, or for the P3D users who lose clickables at v2.4.

Magnetos, Starter, generators, boost pumps, amps/volt gauges, avionics switch, lights, pitot, and OAT are all included.

Simply unzip and place the contents of the folder in your FSX Only panel folders.
Caution that the Fire Tanker setup is necessarily different than the regular Harpoon so do not get your hands crossed here.

This is an optional update of course.

 

[manfredc3]

Simply change the following two lines in the aircraft.cfg lights section:

[LIGHTS]
// types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
// 6=Taxi, 7=Recognition, 8=Wing, 9=Logo, 10=Cabin
light.0 =3, -1.278000, -36.752000, 3.664000, fx_navred //left wing
light.1 =3, -1.278000, 36.752000, 3.664000, fx_navgre //right wing

Thanks Milton,

That worked for the harpoon, but the Nav lights on the lodestar were way off.

So after some tinkering with the numbers I found this to be the closest as I could get without model details:

[LIGHTS]
// types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
// 6=Taxi, 7=Recognition, 8=Wing, 9=Logo, 10=Cabin
light.2 =3, -1.065000, -32.844000, 3.965000, fx_navred //left wing
light.3 =3, -1.065000, 32.844000, 3.965000, fx_navgre //right wing

I also noticed that the light.1 and light.8 both assign the tail nav light, where 1 is white, and 8 is red. Is that to create a specific white/red glow?

Not sure if others saw the same light issue, but this seems to have worked for me. Can you tell me if the numbers I came up with are close enough to what they should be according to the model data.

Thanks again for proving such a joyful addition to my hangar.

Manfred

 

[Milton Shupe]

Thanks Milton,

That worked for the harpoon, but the Nav lights on the lodestar were way off.

So after some tinkering with the numbers I found this to be the closest as I could get without model details:

[LIGHTS]
// types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
// 6=Taxi, 7=Recognition, 8=Wing, 9=Logo, 10=Cabin
light.2 =3, -1.065000, -32.844000, 3.965000, fx_navred //left wing
light.3 =3, -1.065000, 32.844000, 3.965000, fx_navgre //right wing

I also noticed that the light.1 and light.8 both assign the tail nav light, where 1 is white, and 8 is red. Is that to create a specific white/red glow?

Not sure if others saw the same light issue, but this seems to have worked for me. Can you tell me if the numbers I came up with are close enough to what they should be according to the model data.

Thanks again for proving such a joyful addition to my hangar.

Manfred

The Lodestar is a WIP so I have not adjusted lights yet.

See attached for tail lights; not sure all were like this; some were.


Light Positions //this is center of the lens, not necessarily where the light should be for best display

Beacon

-6.151, 0, 3.333

Wings

-1.076, +-32.693, 3.868

Tail

-34.940, 0, 3.317 top
-34.940, 0, 3.093 bottom