Hi,
I took a bit of time to work this out and I thought maybe others might enjoy this. I've studied the real life Flying Fortress checklist and decided to try something out. I took off from RAF Thorpe Abbotts and levelled off at 9000ft over Great Yarmouth. Turned the autopilot on and went through the feathering and unfeathering procedures.....IT WORKS PERFECTLY!! How about that!
Copy and print out the checklist and try them for yourself.
FEATHERING
1. Throttle back engine to be feathered
2. Press feather button
3. Mixture “CUTOFF”
4. Fuel Boost “OFF”
5. Propellor “LOW RPM”
6. Magneto “OFF”
7. Generator “OFF”
8. Fuel shut off valve “OFF”
UNFEATHERING
1. Fuel shut off valve “ON”
2. Magneto “ON”
3. Propellor “LOW RPM”
4. Throttle cracked
5. Supercharger “OFF”
6. Depress feather button
7. Mixture “AUTO-RICH”
8. Select START, wait 12 seconds
9. While in START position, give one shot of primer if needed then select MESH
10. When the engine is meshed (turning), continue to prime until engine fires
11. After engine starts, idle at 1,000 RPM, check oil pressure
12. Warm up engine >40 deg oil temperature
13. Generator “ON”
14. Propellor rpm as required
If there is anything I've missed just holler. Video to follow...just to prove it
Andrew