Eagle Rotorcraft Simulations presents Bell 206B JetRanger

[euroastar350]

Has been uploaded to Hovercontrol, Avsim, Flightsim.com and Simviation....give them time to refresh their respective libraries. Enjoy:ernae:

 

[Killbilly]

Sweet. Thanks.

 

[Hughes-MDflyer4]

It has been approved over at Aussiex.org. Enjoy! :ernae:

http://aussiex.org/forum/index.php?/files/file/2091-fsx-bell-206b-jetranger-iii/

 

[Cirrus N210MS]

Thank you for the New Bell 206!

 

[Vratan]

Nice addon! But I have two problems. Float variant...don't float, I think. And nose camera don't move in VC, only shadow on ground.

 

[Cirrus N210MS]

yep!

I am working on replacing my stock Bell206 With This One! just finished it So Much Nicer!!!:salute:

 

[Cirrus N210MS]

 

[trevytt2004]

Beautifully done, one thing missing tho.....the long ranger......

 

[Killbilly]

Absolutely fantastic work! This is so much better than the default 206. My only issue is, as was mentioned earlier in this thread, the float version doesn't. Is there a quick DIY fix for this?

 

[Cirrus N210MS]

replace The contact Points in the aircraft.cfg file with this ! and it will float

[contact_points]
point.0=4, 4.83, 4.0, -4.70, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.1=4, -3.50, -4.0, -4.60, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.2=4, -3.50, 4.0, -4.60, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.3=4, 4.83, -4.0, -4.70, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.4=3, 4.83, 4.0, -3.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
point.5=3, -3.50, -4.0, -4.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 7.0, 0.0, 0.0
point.6=3, -3.50, 4.0, -4.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
point.7=3, 4.83, -4.0, -3.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 7.0, 0.0, 0.0
point.8=2, 0.00, -16.67, 6.00, 1.0, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 5.0, 0.0, 0.0
point.9=2, 0.00, 16.67, 6.00, 1.0, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 6.0, 0.0, 0.0
point.10=2, -22.0, 0.85, -0.45, 600, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 9.0, 0.0, 0.0
point.11=2, 16.67, 0.0, 6.00, 1.0, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 4.0, 0.0, 0.0
point.12=3, -11.50, -4.0, -3.7, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
point.13=3, -11.50, -4.0, -3.7, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0

 

[OleBoy]

This one is a must try. Thank you.

OT, but there is also an AS-350 Squirrel that was converted for FSX. It's worth a test and hopefully a replacement until the Nemeth brothers finish theirs. http://www.hovercontrol.com/cgi-bin/ifolio/imageFolio.cgi?action=view&link=FSX_Helicopter_Downloads&image=fsx_fspainter_as350ba_complete.zip&img=&tt=zip

 

[ColinT46]

Many thanks Cirrus,

Your contact points note cured it for me.

 

[euroastar350]

Thanks for the compliments guys, glad our work paid off. As for the camera and float issues, Brandon will get that taken care of since I am going away on holidays for 2 1/2 weeks and I won't return until December 1.

 

[Cirrus N210MS]

here is a Mirror download lInk for the New Bell This Has the fix in the floats version This is a No Install version Just copy them into Rotor Craft folder in Sim objects! aswell This one is modded to replace The stock Bell 206 So you will need to go in the Microsoft bell 206 and rename the aircraft.cfg to aircraftxx.cfg so it will not show

Thanks again Guys for this sweet new Helicopter





http://www.megaupload.com/?d=V3BIGXPU

 

[Bjoern]

Nicely done, guys!

 

[Cirrus N210MS]

Here is one of the repaints i download and which replaces one of the paint themes for the stock Bell Which is now Set to use the Eagle rotorcraft Bell 206!! Looks Much Better then the stock one!
:salute:

 

[Killbilly]

Nice paints. Where'd you get them?

Also, thanks for the contact points fix!

 

[Cirrus N210MS]

http://www.megaupload.com/?d=V3BIGXPU

all repaints i found aswell as the fix

 

[Hughes-MDflyer4]

Glad everyone is enjoying it!

The contact points missing on the floats model was a mistake on my part. Was going to add them, but ended up forgetting. Will be doing a small update pack in a few weeks after any other bugs have been discovered.

And regarding the camera in the VC...I tried to get it to work, but I don't have the latest animation XML codes from George, so finishing off those TV VCs, I had to just leave the camera static.

 

[Cirrus N210MS]

keep up the great work flyer love the new bell