euroastar350
SOH-CM-2023
Has been uploaded to Hovercontrol, Avsim, Flightsim.com and Simviation....give them time to refresh their respective libraries. Enjoy:ernae:
-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
Eagle Rotorcraft Simulations presents Bell 206B JetRanger
- Thread starter euroastar350
- Start date
Hughes-MDflyer4
Charter Member
It has been approved over at Aussiex.org. Enjoy! :ernae:
http://aussiex.org/forum/index.php?/files/file/2091-fsx-bell-206b-jetranger-iii/
http://aussiex.org/forum/index.php?/files/file/2091-fsx-bell-206b-jetranger-iii/
Cirrus N210MS
Charter Member
Thank you for the New Bell 206!
Cirrus N210MS
Charter Member
yep!
I am working on replacing my stock Bell206 With This One! just finished it So Much Nicer!!!:salute:
I am working on replacing my stock Bell206 With This One! just finished it So Much Nicer!!!:salute:
Cirrus N210MS
Charter Member
trevytt2004
Charter Member
Beautifully done, one thing missing tho.....the long ranger......
Cirrus N210MS
Charter Member
replace The contact Points in the aircraft.cfg file with this ! and it will float
[contact_points]
point.0=4, 4.83, 4.0, -4.70, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.1=4, -3.50, -4.0, -4.60, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.2=4, -3.50, 4.0, -4.60, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.3=4, 4.83, -4.0, -4.70, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.4=3, 4.83, 4.0, -3.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
point.5=3, -3.50, -4.0, -4.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 7.0, 0.0, 0.0
point.6=3, -3.50, 4.0, -4.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
point.7=3, 4.83, -4.0, -3.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 7.0, 0.0, 0.0
point.8=2, 0.00, -16.67, 6.00, 1.0, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 5.0, 0.0, 0.0
point.9=2, 0.00, 16.67, 6.00, 1.0, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 6.0, 0.0, 0.0
point.10=2, -22.0, 0.85, -0.45, 600, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 9.0, 0.0, 0.0
point.11=2, 16.67, 0.0, 6.00, 1.0, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 4.0, 0.0, 0.0
point.12=3, -11.50, -4.0, -3.7, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
point.13=3, -11.50, -4.0, -3.7, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
[contact_points]
point.0=4, 4.83, 4.0, -4.70, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.1=4, -3.50, -4.0, -4.60, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.2=4, -3.50, 4.0, -4.60, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.3=4, 4.83, -4.0, -4.70, 840.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 0.0, 0.0, 0.0
point.4=3, 4.83, 4.0, -3.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
point.5=3, -3.50, -4.0, -4.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 7.0, 0.0, 0.0
point.6=3, -3.50, 4.0, -4.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
point.7=3, 4.83, -4.0, -3.4, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 7.0, 0.0, 0.0
point.8=2, 0.00, -16.67, 6.00, 1.0, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 5.0, 0.0, 0.0
point.9=2, 0.00, 16.67, 6.00, 1.0, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 6.0, 0.0, 0.0
point.10=2, -22.0, 0.85, -0.45, 600, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 9.0, 0.0, 0.0
point.11=2, 16.67, 0.0, 6.00, 1.0, 0, 0.0000, 0.0, 0.000000, 0.0, 0.000000, 0.0, 0.0, 4.0, 0.0, 0.0
point.12=3, -11.50, -4.0, -3.7, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
point.13=3, -11.50, -4.0, -3.7, 600.0, 0, 0.0, 0.0, 0.5, 2.5, 0.8, 0.0, 0.0, 8.0, 0.0, 0.0
This one is a must try. Thank you.
OT, but there is also an AS-350 Squirrel that was converted for FSX. It's worth a test and hopefully a replacement until the Nemeth brothers finish theirs. http://www.hovercontrol.com/cgi-bin/ifolio/imageFolio.cgi?action=view&link=FSX_Helicopter_Downloads&image=fsx_fspainter_as350ba_complete.zip&img=&tt=zip
OT, but there is also an AS-350 Squirrel that was converted for FSX. It's worth a test and hopefully a replacement until the Nemeth brothers finish theirs. http://www.hovercontrol.com/cgi-bin/ifolio/imageFolio.cgi?action=view&link=FSX_Helicopter_Downloads&image=fsx_fspainter_as350ba_complete.zip&img=&tt=zip
euroastar350
SOH-CM-2023
Thanks for the compliments guys, glad our work paid off. As for the camera and float issues, Brandon will get that taken care of since I am going away on holidays for 2 1/2 weeks and I won't return until December 1.
Cirrus N210MS
Charter Member
here is a Mirror download lInk for the New Bell This Has the fix in the floats version This is a No Install version Just copy them into Rotor Craft folder in Sim objects! aswell This one is modded to replace The stock Bell 206 So you will need to go in the Microsoft bell 206 and rename the aircraft.cfg to aircraftxx.cfg so it will not show
Thanks again Guys for this sweet new Helicopter
http://www.megaupload.com/?d=V3BIGXPU
Thanks again Guys for this sweet new Helicopter
http://www.megaupload.com/?d=V3BIGXPU
Cirrus N210MS
Charter Member
Here is one of the repaints i download and which replaces one of the paint themes for the stock Bell Which is now Set to use the Eagle rotorcraft Bell 206!! Looks Much Better then the stock one!
:salute:
:salute:
Cirrus N210MS
Charter Member
Hughes-MDflyer4
Charter Member
Glad everyone is enjoying it!
The contact points missing on the floats model was a mistake on my part. Was going to add them, but ended up forgetting.
Will be doing a small update pack in a few weeks after any other bugs have been discovered.
And regarding the camera in the VC...I tried to get it to work, but I don't have the latest animation XML codes from George, so finishing off those TV VCs, I had to just leave the camera static.
The contact points missing on the floats model was a mistake on my part. Was going to add them, but ended up forgetting.
Will be doing a small update pack in a few weeks after any other bugs have been discovered.And regarding the camera in the VC...I tried to get it to work, but I don't have the latest animation XML codes from George, so finishing off those TV VCs, I had to just leave the camera static.
Cirrus N210MS
Charter Member
keep up the great work flyer love the new bell