• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

FR Super Cub Extreme for v5 Released

YoYo said:
Ok, after many test - with model is everything ok, no issue of any any gauge ect. I noticed the same on some of situation even with default airplanes.
It looks for me like its .... beta of Active Sky P3D and AntiVirus exlusion and / or ActiveSkyP3D injection so its totally differnt subject. Just for info :).

Btw. found nice short movie about Your work:

btw2. is it possible to have model with from Ultra package (with his wing and slots ect), even payware?

btw3. Can You add free windshield rain effect for P3Dv5 from A2A? Pretty please for this :loyal:.
Click to expand...


Thanks for reporting back, and good to know.

Thanks for the video, too. "Too good for freeware?" lol :)

Is anyone else interested in the Ultra for v5?
 
Ok, 2 cents from my side too. Do You like green? ;) Take HULK skin (soon) for FR Super Cub Ultra.

Inspiration for this skin was Super Cub (modded for 4 places) of Kirk Ellis (N1169A).



This skin was created for Today's standard - hi-res (4096 pxt), soft weathering and some cockpit changes also (improving resolution too). Tested and created for P3Dv5 only. Btw. you need FR Super Cub but Ultra version (so THIS FSX version, it works well in P3Dv5 also, without any issue). I did this skin for Ultra, not for Extreme version because I needed to have different wing mechanics (in real this plane has similar wings like Ultra, not standard).

Just two, more screens Tomorrow:

EEAmNzV.jpg


YtR9Qut.jpg
 
First...Thanks to Mike for this great aircraft. Second...Thanks to Jankees for SE-GCK...love it...only livery I fly with the Cub.

Then...one issue. I'm flying it in 4.5 HF3 with Win. 10. The strobes are on as soon as I turn the Nav switch on. Strobe switch will not turn them off. If I turn Nav. Lights off the strobes go off. Nav and Strobes are on even with the master switch off, if the Nav switch is on.

Garry
 
triflyman said:
Then...one issue. I'm flying it in 4.5 HF3 with Win. 10. The strobes are on as soon as I turn the Nav switch on. Strobe switch will not turn them off. If I turn Nav. Lights off the strobes go off. Nav and Strobes are on even with the master switch off, if the Nav switch is on.

Garry
Click to expand...


I noticed that light problem also in v5.
 
modelr said:
I noticed that light problem also in v5.
Click to expand...

I think this is just the never-ending lighting bug in action again (and there's lots more to that). It probably happens in FSX, as well. Everything is coded and animated correctly. The best remedy I know that sometimes works of is to not use the Cub in a saved flight if there's been another aircraft in other previously. Or try loading a default C-172 first. Others may have other things to try.
 
Solution for this is very simply - dont use F-22 default flight as start flight. Personally this is the first thing what I do after new simulator instalation. Take Maule, turn off everything, save it as default flight. Next each plane will be in Cold and Dark condition from the beginning with all or near all switches and levers in down position. If it doesnt help, use (when saving) cockpit familiarization option („on”). 3 minutes of work only :).
 
Good idea, YoYo.

I usually do the same, however, withall the updates coming so fast and close together, it just slipped my mind. Senior moments are kicking in. 😎

Sent from my SM-G935R4 using Tapatalk
 
YoYo,

Thanks. I had already, when I first got P3D v4, the default Cub for my Default Flight...but after reading the Milviz article I think the Cub was a bad choice as it could be considered "to simple"...no switches. I'll try changing to the Maule, as you do, plus going through the Milviz procedure and see what happens.

Garry
 
Okay...followed the Milviz procedure using the Maule for the default flight. Interesting thing is that when I then load the Maule, and turn off "Pause", the Master Battery Switch and the Nav lights switch goes on. Went through the Milviz procedure again but same result.

So I turned off the Master Battery and Nav Light switch on the Maule, then loaded the Super Cub...no help. Still loads with the master battery off but the Nav Light switch ON and the strobes flashing. Also, when I went outside to look at the Nav Lights I see it is only the left strobe that is flashing. I have to turn on the master battery and strobe light switch to get all three strobes flashing.

Don't know what you mean by the "Cockpit Familiarization Option"...but could not find such an option.

Any ideas?

Garry
 
triflyman said:
Okay...followed the Milviz procedure using the Maule for the default flight. Interesting thing is that when I then load the Maule, and turn off "Pause", the Master Battery Switch and the Nav lights switch goes on. Went through the Milviz procedure again but same result.

So I turned off the Master Battery and Nav Light switch on the Maule, then loaded the Super Cub...no help. Still loads with the master battery off but the Nav Light switch ON and the strobes flashing. Also, when I went outside to look at the Nav Lights I see it is only the left strobe that is flashing. I have to turn on the master battery and strobe light switch to get all three strobes flashing.

Don't know what you mean by the "Cockpit Familiarization Option"...but could not find such an option.

Any ideas?

Garry
Click to expand...


For me its ok, but now I use only Ultra version. Maybe a bug in Extreme? I'll check Extreme version how it work in my situation.

About ticked option - sorry, serialization :), turn it on (on screen I have off) and save the flight, see what happens:

 
YoYo,

Well...interesting result. Glad you mentioned the Cockpit Serialization thing...had forgotten about that as never used it. So that did not help my new Default Flight, with the Maule...still loads with the Master Switch and Nav Switch on. But...if I then turn them off and then now load the Super Cub...Master Switch and Nav Switch are both off and I'm in a C&D condition.

What's really strange, as I said before...it's only the port strobe light that goes on with the Nav lights. The others require I turn on the strobe lights.

Go figure. Any way thanks for your help.

Garry
 
No Electrical Charging

This started out to be only an occasional issue...but now is every flight. Start up the engine and the Volt/Amp meter says 0.0. I can fly for about 30 minutes than I loose all electrical power to the cockpit, including the radios (as if the battery went dead from no charging). Funny thing is exterior lights work except for landing lights. Makes night flight kind of interesting.

I tried loading my P3D v4.5 default flight first, using the Maule, and having it with Master & Alt switches turned on but no help. Occasionally, during that 30 minutes before I loose electrical, the Volt meter will come on with the 28v showing...but it doesn't last and shortly will go back to 0.0.

Any ideas on how to fix would be appreciated.

Thanks,

Garry
 
triflyman said:
This started out to be only an occasional issue...but now is every flight. Start up the engine and the Volt/Amp meter says 0.0. I can fly for about 30 minutes than I loose all electrical power to the cockpit, including the radios (as if the battery went dead from no charging). Funny thing is exterior lights work except for landing lights. Makes night flight kind of interesting.

I tried loading my P3D v4.5 default flight first, using the Maule, and having it with Master & Alt switches turned on but no help. Occasionally, during that 30 minutes before I loose electrical, the Volt meter will come on with the 28v showing...but it doesn't last and shortly will go back to 0.0.

Any ideas on how to fix would be appreciated.

Thanks,

Garry
Click to expand...

The Super Cub doesn't have an on/off generator/alternator, and so if you're using it in a flight that has had a different aircraft in it previously, you may be flying with the 'invisible' generator/alternator off. This means you're flying on the battery alone, and this will get used up.

A good way to check is to create a new flight with, say, the default C-172. Make sure the generator switch is on. Save this flight. Then, load the flight, and then switch to the Super Cub. This should cure the problem.

Alternatively, you can always add the "electric_always_available=1" entry into the aircraft.cfg, and then you never risk losing power.
 
You must log in or register to reply here.
Back
Top