-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
FSX Vietnam War released
- Thread starter Vietnam War Project
- Start date
Excellent work done here, my sincere applaus 
Two q's:
1) to what way does the AI implemented in the scenery affect other AI (and is there a simple way to switch between modern world AI and the Vietnam era AI)?
2) I did a fam-flight through Vietnam and started/finished from Danang. I noticed especially the Danang scenery was a bit heavy on my FPS rates (e.g. taxiing, take-off and landing were slide-shows). Is there a way to reduce the weight of the scenery a little?
Otherwise.......a masterpiece i'm gonna spend a lot of time with! :salute:
Two q's:
1) to what way does the AI implemented in the scenery affect other AI (and is there a simple way to switch between modern world AI and the Vietnam era AI)?
2) I did a fam-flight through Vietnam and started/finished from Danang. I noticed especially the Danang scenery was a bit heavy on my FPS rates (e.g. taxiing, take-off and landing were slide-shows). Is there a way to reduce the weight of the scenery a little?
Otherwise.......a masterpiece i'm gonna spend a lot of time with! :salute:
icycle
SOH-CM-2024
Great job
I second the comment, Excellent work!!! :salute:
This certainly fills a void left since FS2002, and the "Knowles" sceneries.
I too have seen a substantial drop in frames, especially around Danang,Cam Ranh, & Tansonnhat. When you get away from them though, things improve tremendously. I think its that it seems that a lot of the AI craft, seem to be versions of the flyable, FS2004 era aircraft.
Now we just need some better SEAsia specific autogen, and a way to limit some of the urban areas, and we'll be in business!
Great job, thanks for your efforts.
Bill
ps. Any thoughts of adding Cubi Point/Subic, in the Philippines?
I second the comment, Excellent work!!! :salute:
This certainly fills a void left since FS2002, and the "Knowles" sceneries.
I too have seen a substantial drop in frames, especially around Danang,Cam Ranh, & Tansonnhat. When you get away from them though, things improve tremendously. I think its that it seems that a lot of the AI craft, seem to be versions of the flyable, FS2004 era aircraft.
Now we just need some better SEAsia specific autogen, and a way to limit some of the urban areas, and we'll be in business!
Great job, thanks for your efforts.
Bill
ps. Any thoughts of adding Cubi Point/Subic, in the Philippines?
E
EgoR64
Guest
Do you recommend a 3rd party Mesh for your area ?
Thx & Cheer !!
Thx & Cheer !!
Vietnam War Project
Charter Member
AI Trafic, meshes and lanclasses
Hello,
Once more, many thanks !!! :ernae:
About scenes and FPS, there are several bases with low FPS , depending on location and the axis of the aircraft and the pilot view.
We tried to give some solutions in the documentation.
(Chapter configuration and settings that you can find in the VNW documentation folder in the root folder of FSX)
Many airplanes come from FS9 and have been converted to AI (we tried several format textures DXT1, DDS, with and without mipmapping).
In addition, some aircraft have a large number of textures needed to display the outside, adding additional problems).
So on some airfields, the AI traffic is set to appear from 30 to 70% or more, about 70% , all aircrafts appear.
Try to Nakhon Phanom!
About Meshes, we use the default FSX, not knowing which would be used, we do not recommend for the moment other meshes.
There already exist a number of sites with objects for the missions, but we can see in the future!
You can also do adjustment to the complexity of scenes in FSX parameters, many objects on major bases are scheduled to appear from very dense to extremely dense (revetments, shelters ...)
For major cities, the Vietnam of today includes a large number of cities with very dense urbanization,
and Microsoft-Aces studios postponed.
We looked at a number of pictures from 1945 to 1970, and we tried to replicate, modestly, by changing landclasses, the cities.
One thing is sure, the cities of Vietnam have grown enormously since 1970.
We use Fscene4X Asia, as replacement texures, all screenshots you can see at project web site use these textures.
It seems that some network flight have began !? In France, some Skyraiders strikes, and rescue missions using network have been seen !
Remember : OPEN YOUR EYES ! There are some crews to be rescued...
AND
All improvements are welcome, contact us
Cheers
FSX Vietnam War project
Hello,
Once more, many thanks !!! :ernae:
About scenes and FPS, there are several bases with low FPS , depending on location and the axis of the aircraft and the pilot view.
We tried to give some solutions in the documentation.
(Chapter configuration and settings that you can find in the VNW documentation folder in the root folder of FSX)
Many airplanes come from FS9 and have been converted to AI (we tried several format textures DXT1, DDS, with and without mipmapping).
In addition, some aircraft have a large number of textures needed to display the outside, adding additional problems).
So on some airfields, the AI traffic is set to appear from 30 to 70% or more, about 70% , all aircrafts appear.
Try to Nakhon Phanom!
About Meshes, we use the default FSX, not knowing which would be used, we do not recommend for the moment other meshes.
There already exist a number of sites with objects for the missions, but we can see in the future!
You can also do adjustment to the complexity of scenes in FSX parameters, many objects on major bases are scheduled to appear from very dense to extremely dense (revetments, shelters ...)
For major cities, the Vietnam of today includes a large number of cities with very dense urbanization,
and Microsoft-Aces studios postponed.
We looked at a number of pictures from 1945 to 1970, and we tried to replicate, modestly, by changing landclasses, the cities.
One thing is sure, the cities of Vietnam have grown enormously since 1970.
We use Fscene4X Asia, as replacement texures, all screenshots you can see at project web site use these textures.
It seems that some network flight have began !? In France, some Skyraiders strikes, and rescue missions using network have been seen !
Remember : OPEN YOUR EYES ! There are some crews to be rescued...
AND
All improvements are welcome, contact us
Cheers
FSX Vietnam War project
falcon409
SOH-CM-2025
Has anyone come up with a good reference map for this addon? I went into FS9 and opened FSNav and saved sections of the Vietnam mapping until I had the whole thing (8 shots) I just have to go back and mark the bases and LZ's that are part of the project.
Having a list of the bases is fine, but knowing their relation to one another in order to setup flights isn't real easy when you have no idea where they are, lol. Having a visual reference would be perfect. I have downloaded several color maps of both South Vietnam and the entire country and may just end up using that rather than the FSNav maps.
Having a list of the bases is fine, but knowing their relation to one another in order to setup flights isn't real easy when you have no idea where they are, lol. Having a visual reference would be perfect. I have downloaded several color maps of both South Vietnam and the entire country and may just end up using that rather than the FSNav maps.
peter12213
FSX Acceleration!
I could use a decent map as well to be honest! :salute:
Vietnam War Project
Charter Member
Map and Plan G
hello Falcon and Peter
We have started a map a few weeks ago, but there is a great freeware Plan G using google map, so easy to use, with zoom, and many information about airfields (like FSNav)
My best way to find lost airfields in the jungle, and mountains.
You can also create and load flightplans.
Plan G : http://www.tasoftware.co.uk/
Freeware, but registration required.
Read carefuly documentation and Plan G forum.
And don't forget to build database (default FSX, and addon sceneries airfields are included), it takes a few minutes.
A must have !!!
Cheers
Xavier
FSX Vietnam War project
hello Falcon and Peter
We have started a map a few weeks ago, but there is a great freeware Plan G using google map, so easy to use, with zoom, and many information about airfields (like FSNav)
My best way to find lost airfields in the jungle, and mountains.
You can also create and load flightplans.
Plan G : http://www.tasoftware.co.uk/
Freeware, but registration required.
Read carefuly documentation and Plan G forum.
And don't forget to build database (default FSX, and addon sceneries airfields are included), it takes a few minutes.
A must have !!!
Cheers
Xavier
FSX Vietnam War project
falcon409
SOH-CM-2025
Yep, I've got that one. . .have had it since he went public with it and have kept up with the updates. I guess that's an option. What I'd like to do, is have a way to permanently mark the field locations in Plan-G, so that, at a glance, I can pick two or three fields and set a flight plan. I don't think that's possible, but I'll check.
Thanks:salute:
Thanks:salute:
falcon409
SOH-CM-2025
Ok, here's what I came up with. I loaded Google Earth Tracker and FSX and went through all the Bases/LZ's in Vietnam on the list and marked every one and then saved that file as a kmz file. Sooooo, anyone who wants that much (I haven't done Laos, Thailand, Cambodia, etc), I'll post that file and you can load it into Google Earth to give you a sort of "War Map", lol.
Many of the positions, based on where they fall in Google Earth may seem off, but they are marked per the positioning of the aircraft as I went from base to base in FSX (which shows you how far off many of them are). . .oh, and it took me quite a while to catch on to turning all the graphics sliders off in FSX so that it didn't take 3 dang minutes to load each airport, lol. Once I did that the airports loaded MUCH faster, lol.
Many of the positions, based on where they fall in Google Earth may seem off, but they are marked per the positioning of the aircraft as I went from base to base in FSX (which shows you how far off many of them are). . .oh, and it took me quite a while to catch on to turning all the graphics sliders off in FSX so that it didn't take 3 dang minutes to load each airport, lol. Once I did that the airports loaded MUCH faster, lol.
falcon409
SOH-CM-2025
Ok, here is the finished War Map:
http://www.box.net/shared/static/vj46rzjtii.zip
I added all the SE Asia bases, LZ's, Water Landings for Vietnam, Laos, Cambodia and Thailand. I did not include those in Japan, Philippines and US. I think you can probably figure those out for yourself, lol.
I want to reiterate that these positions were marked using Google Earth Tracker and FSX. I went to every single position in FSX and marked that spot on Google Earth. They may not be exact, but it should be a good visual reference when deciding on Mission Flight Plans.
I did note that while marking the landing areas in Laos, that they appeared to be situated in very rugged Mountain Terrain. . .it might be fun to check those out. Also, many of the LZ's there are relatively close together, some as close as 5nm, so hopping from one to the other should be a blast.
Thanks again to everyone involved with the making and release of the Vietnam War Project. So many places to bomb and so little time, lol.:salute:
oops, almost forgot, for those who have never used Google Earth, now's the time, cause ya can't use this file without it, lol. Once you unzip the file, it can be placed on the desktop and with Google Earth installed, just double click the file and it will load Google Earth with the sites in place.
http://www.box.net/shared/static/vj46rzjtii.zip
I added all the SE Asia bases, LZ's, Water Landings for Vietnam, Laos, Cambodia and Thailand. I did not include those in Japan, Philippines and US. I think you can probably figure those out for yourself, lol.
I want to reiterate that these positions were marked using Google Earth Tracker and FSX. I went to every single position in FSX and marked that spot on Google Earth. They may not be exact, but it should be a good visual reference when deciding on Mission Flight Plans.
I did note that while marking the landing areas in Laos, that they appeared to be situated in very rugged Mountain Terrain. . .it might be fun to check those out. Also, many of the LZ's there are relatively close together, some as close as 5nm, so hopping from one to the other should be a blast.
Thanks again to everyone involved with the making and release of the Vietnam War Project. So many places to bomb and so little time, lol.:salute:
oops, almost forgot, for those who have never used Google Earth, now's the time, cause ya can't use this file without it, lol. Once you unzip the file, it can be placed on the desktop and with Google Earth installed, just double click the file and it will load Google Earth with the sites in place.
falcon409
SOH-CM-2025
No problem Rich, hopefully it turns out to be a good reference for everyone. Of course, once you have it loaded in Google Earth, you can tweak anything you need to, especially the naming of the individual placemarks. I used the names on most, but a lot of them, especially in Laos, I just used the ICAO code, but they do have names that can be substitute if you want. Just right click on the placemarks and while the yellow box is showing around them (in edit mode) you can change anything you want, even drag it to a different location if necessary. Once you close the edit box, it's locked to that location again.
Let me know if you folks have any problems with it.:salute:
Vietnam War Project
Charter Member
A great help, and info. about LZ
for me to retrieve planes, and many objects i've lost in jungle and mountains.
A very great job.
Many thanks.
For those who like flying in montainous areas, Laos may be a challenge.
You can take off from Long Tien using a Pilatus Porter and try to land at LS 02 or LS 85.
Don't forget some LZ are fictious.
LZ Alpha, Bootleg, Cimarron, Dragonfly, Emeraude, French Plantation (not documented)
You can disable them, by disabling Vietnam War project Fictive LZ
Seaplanes refuelling points are fictious (except USS Pine Island represented by an old tanker)
they are named as Hydro, dedicated to seaplanes pilots (please try the HU-16 - refer to our web site -, many pilots were rescued by their crew along the coast, you can help a crew in water, north of DMZ).
Cheers
Xavier
FSX Vietnam War project
for me to retrieve planes, and many objects i've lost in jungle and mountains.
A very great job.
Many thanks.
For those who like flying in montainous areas, Laos may be a challenge.
You can take off from Long Tien using a Pilatus Porter and try to land at LS 02 or LS 85.
Don't forget some LZ are fictious.
LZ Alpha, Bootleg, Cimarron, Dragonfly, Emeraude, French Plantation (not documented)
You can disable them, by disabling Vietnam War project Fictive LZ
Seaplanes refuelling points are fictious (except USS Pine Island represented by an old tanker)
they are named as Hydro, dedicated to seaplanes pilots (please try the HU-16 - refer to our web site -, many pilots were rescued by their crew along the coast, you can help a crew in water, north of DMZ).
Cheers
Xavier
FSX Vietnam War project
Vietnam War Project
Charter Member
C-47 SEA Textures
It is default FSX DC-3 repainted by pepe_pompero.
Used at AI at Pleiku, and Nakhon Phanom.
You can find the textures at our web site, downloads, repaints
best
It is default FSX DC-3 repainted by pepe_pompero.
Used at AI at Pleiku, and Nakhon Phanom.
You can find the textures at our web site, downloads, repaints
best
JensOle
SOH-CM-2023
I got home yesterday after being away for 10 days and it was great news to see that the <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com
ffice:smarttags" /><st1:country-region w:st="on"><st1lace w:st="on">Vietnam</st1lace></st1:country-region> scenery project had been released. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" /><o></o>
Very impressive work, thank you! This makes flying over the SEA area a lot more interesting and fun.<o></o>
<o></o>
I too got some fps issues at certain places and one thought that came to my mind is that maybe it will help out if the Admin and barrack areas of the larger US Thai and SV bases with their building can be made a separate mdl so that it can be removed to save fps for people needing it. I recon this involves a lot of work, just and idea.<o></o>
<o></o>
For the ai USAF T-28, I can see that you have the "AH" tailcode of the stateside training squadron at Hurlburt, I have a 606<SUP>th</SUP> Sqn “TO” repaint with black painted underside if you want.<o></o>
<o></o>
Keep up the great work!
<o></o>
<o>Best regards</o>
<o>Jens-Ole</o>
ffice:smarttags" /><st1:country-region w:st="on"><st1lace w:st="on">Vietnam</st1lace></st1:country-region> scenery project had been released. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" /><o></o>Very impressive work, thank you! This makes flying over the SEA area a lot more interesting and fun.<o
></o><o
></o>I too got some fps issues at certain places and one thought that came to my mind is that maybe it will help out if the Admin and barrack areas of the larger US Thai and SV bases with their building can be made a separate mdl so that it can be removed to save fps for people needing it. I recon this involves a lot of work, just and idea.<o
></o><o
></o>For the ai USAF T-28, I can see that you have the "AH" tailcode of the stateside training squadron at Hurlburt, I have a 606<SUP>th</SUP> Sqn “TO” repaint with black painted underside if you want.<o
></o><o
></o>Keep up the great work!
<o
></o> <o
>Best regards</o><o
>Jens-Ole</o>