• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

Khalkhin-Gol Incident-USSR

Every this is going good

Shadow Wolf 07 said:
Good Marty, is the Campaign or are individual missions working for you?
Click to expand...
I have all the Campaign and missions working great. I am looking for some screen to change the look of the campaign. This is the best Campaign to be released yet. I wish I could get the Japanese side of Nomonhan campaign working but no luck there. The Russian are doing great. Thanks for all your time and effort in this campaign. It is a masterpiece. With time the JAAF side will work out I am sure.
 
Marty said:
I have all the Campaign and missions working great. I am looking for some screen to change the look of the campaign. This is the best Campaign to be released yet. I wish I could get the Japanese side of Nomonhan campaign working but no luck there. The Russian are doing great. Thanks for all your time and effort in this campaign. It is a masterpiece. With time the JAAF side will work out I am sure.
Click to expand...
I'll make an appeal to Rami. He enjoys updating Axis campaigns. :) Thanks for the praises and compliments.
 
Shadow Wolf 07 said:
I'll make an appeal to Rami. He enjoys updating Axis campaigns. :) Thanks for the praises and compliments.
Click to expand...


I'm also working on getting the Japanese campaign sorted out! I've got the original Nomonhan version working but it's quite messy so have decided to do it again from scratch, - I'll put some of the missions here as I "complete" them, if that's ok? (have put a clean cfs2 installation on purely for this so that I don't get any conflicts with airfields etc).

Have you had any problems with any of the i-15 tipo2 cockpit panels (going blank looking left/right etc) - If so I have a fix?

Also the texture for Buir Lake is a bit rubbish - (if you are using the Rhumbaflappy enhanced mesh/texture?), - I have replaced the 000b2su1, and 000h2su1 textures, with the original pacific versions, and the lake looks much better!
 
That is good news that you are working on a Japanese side I too initially tried to use xavierb's Nomonhan. but decided, except for most of the airfields, to go from scratch. I did not use Rhumba's mesh or anything, just a clean install. Yes, the textures around that lake are messed up, but I can live with it. I think I posted a screenshot of what I see earlier in this thread.

No, with my vision and reflexes I fly in the HUD view almost exclusively. I haven't had any issues, therefore, with the I-15 tipo2 panel.

Good fortune to you:

SW07
 
RWILLS said:
I'm also working on getting the Japanese campaign sorted out! I've got the original Nomonhan version working but it's quite messy so have decided to do it again from scratch, - I'll put some of the missions here as I "complete" them, if that's ok? (have put a clean cfs2 installation on purely for this so that I don't get any conflicts with airfields etc).

Have you had any problems with any of the i-15 tipo2 cockpit panels (going blank looking left/right etc) - If so I have a fix?

Also the texture for Buir Lake is a bit rubbish - (if you are using the Rhumbaflappy enhanced mesh/texture?), - I have replaced the 000b2su1, and 000h2su1 textures, with the original pacific versions, and the lake looks much better!
Click to expand...

Hi Chaps,

If you install Rhumba's latest Global Surface Water and Shorelines packages, you will get an accurate depiction of Lake Buir and surrounding lakes. I haven't checked if any airfields are inundated.

Kevin
 

Attachments

  • Lake Buir.jpg
    Lake Buir.jpg
    70.3 KB · Views: 86
kdriver said:
Hi Chaps, If you install Rhumba's latest Global Surface Water and Shorelines packages, you will get an accurate depiction of Lake Buir and surrounding lakes. I haven't checked if any airfields are inundated. Kevin
Click to expand...
Nice Kevin, very nice. Mine is very 'squared' shorelines - see page 2, post #31. Yours is quite an improvement! Question: Where to find Rhumba's new Global Surface Water nd Shorelines package? I looked in the Warbirds scenery (mesh category ) and didn't see it.
 
Last edited:
kdriver said:
Hi Chaps,

If you install Rhumba's latest Global Surface Water and Shorelines packages, you will get an accurate depiction of Lake Buir and surrounding lakes. I haven't checked if any airfields are inundated.

Kevin
Click to expand...


Kevin

Thanks - have you got a link to those packages?

Richard
 
Yes! Thanks.

I remember now. I downloaded and installed it on a different computer a year and a half ago and forgot about it. I'm sure I have it in my storage-backup too. Thanks for the tip and reminder, Kdriver! I recommend that none of those, who have installed this campaign. utilize this addition right off. I will check out the relationship of several layouts to the new rivers and lakes. I may need to edit some missions to accommodate the terrain changes.
 
Hopefully this area of operations with its fairly featureless landscape might be one which can accommodate Rhumba's latest files.
 
here's an improved dp file for the Nate, if you want to try it. Attached screenshots show the difference, with more realistic/reduced hitting area for the wings, especially when viewed from astern/ahead. - (just rename the text file to nate.dp to use, and back up the old one!)


this one also has a couple of extra payloads including a long range tank - I've used the Oscar tank for now in the centre position.


The guns have also been changed to more accurately reflect what the Nate was armed with.
 

Attachments

  • hit boxes compared 1.jpg
    hit boxes compared 1.jpg
    10.3 KB · Views: 7
  • hit boxes compared 2.jpg
    hit boxes compared 2.jpg
    6.8 KB · Views: 6
  • nate2.txt
    12.1 KB · Views: 8
kdriver said:
Hopefully this area of operations with its fairly featureless landscape might be one which can accommodate Rhumba's latest files.
Click to expand...
They fit well on he AO, there was no need to change any missions too. I will add their d/l links to the list in the campaign package.
 
IJAAF's Nomonhan for CFS2

Shadow Wolf 07 said:
They fit well on he AO, there was no need to change any missions too. I will add their d/l links to the list in the campaign package.
Click to expand...

Has anyone made so adjustment to the campaign missions so they will load and play? or is anyone has some missions on the Japanese side please let us know. the Russian side is Great,but I would like to fly the Japanese side also. This is one of the Best campaigns in a lone time. Keep up the good work. :dizzy::dizzy::pop4:
 
Marty said:
Has anyone made so adjustment to the campaign missions so they will load and play? or is anyone has some missions on the Japanese side please let us know. the Russian side is Great,but I would like to fly the Japanese side also. This is one of the Best campaigns in a lone time. Keep up the good work. :dizzy::dizzy::pop4:
Click to expand...


Marty - maybe have a go with the couple of IJAAF missions attached (hopefully!) - and let me know how it goes/any problems wth aircraft/scenery etc?
 

Attachments

  • nomonhan_IJAAF_missions.zip
    24.5 KB · Views: 5
working on the Ki-10 hit-boxes at the moment see attached
 

Attachments

  • Ki-10_improved_hit_boxes.jpg
    Ki-10_improved_hit_boxes.jpg
    9.8 KB · Views: 2
  • Ki-10.txt
    9.3 KB · Views: 1
I can't get them to work

RWILLS said:
Marty - maybe have a go with the couple of IJAAF missions attached (hopefully!) - and let me know how it goes/any problems wth aircraft/scenery etc?
Click to expand...

I loaded the the first one wanted the KI_27_Nate.1 then said the aircraft could not register. the second one was calling for a I-16 russian aircraft, both did not work on my Windows 7 32bit system. Thanks for trying to fix a Japanese mission. :dizzy::dizzy::dizzy:
 
Marty said:
I loaded the the first one wanted the KI_27_Nate.1 then said the aircraft could not register. the second one was calling for a I-16 russian aircraft, both did not work on my Windows 7 32bit system. Thanks for trying to fix a Japanese mission. :dizzy::dizzy::dizzy:
Click to expand...


ok - have messaged you.

Several of my "stock" aircraft are different than what you will have - so i'm just trying to re-write the mission files so they will work for you.

I think that's fixable - I use the BR2 Ki-27 Nate, and it seems to work better as a player aircraft than the others, which do seem to give the odd issue when used as player aircraft, although fine as AI, so it's probably worth you getting that one if you want to run the Japanese side.

https://simviation.com/1/search?submit=1&keywords=ki-27&x=0&y=0

(FS2 AVG Flying Tiger PACK)
 
Shadow Wolf

I've spotted that the speed in the [misc_data] part of the .dp file for the Ki-10, are in mph instead of km/h, which massively affects how fast the Ki-10 flies between waypoints (and therefore how fast it is flying when you encounter it), and it's ability to fly in formation with other "faster" aircraft. - The mission builder limits the speed based on the [misc_data].

(You can see that it's supposed to be metric, km/h by looking at the stock CFS2 aircraft)
 
You must log in or register to reply here.
Back
Top