• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

New FSX-Native Complex Aircraft: Antonov An-24RV

I'm honestly not sure why its not working for you. The file structure is 'unusual' inside the panel folders because (I presume) that it's still in beta/WIP format so many of the files are not yet compiled into cabs. There's no need to take everything out of the panel subfolders. Everything works 'as is'.

Are you using the files Sean uses or the ones from the links in his first thread?
ATB
DaveB:)
 
An-24 Panel folder layout

I d/l straight from the site from Avsim.ru. I have not moved anything, but I did add the Kln-90 files. The load crashes and mentions something about simconnect fails to load sc_acc.dll.

Okay, dum dum me finally fingered it out. It finally dawned on me that this particular file along with three others were in a folder called....ready.. wait for it... "Gauges" . I copied these said files in to the FSX main gauge folder and waaah-laaaaah... :applause:. Now I'll get to the fine tuning, but at least it loads and doesn't crash.. I posted this in case others "might" have a similar issue. Hope this helps someone..
 
Last edited:
I'm still using the files from Avsim.ru too but Sean posted the files he is using (post#50). These may work better for you.

As for the Simconnect error.. this may or may not be associated with the KLN90. Try commenting out ( // ) the KLN lines in the panel.cfg and if the model loads.. you'll know it's the KLN90 causing the problem. The fix should have sorted this out though. I got the latest version from FSDeveloper though I'm sure Sean posted an up-to-date link in post#1
ATB
DaveB:)
 
Simconnect fails to load sc_acc.dll

Dave, thank you for the tips and help. I was editing the above post when you replied. It was all MY error..Senility must be creeping in. I failed to copy four files into the main FSX "gauges" folder. Now to address the updates. Thank you again.
 
simtech said:
Dave, thank you for the tips and help. I was editing the above post when you replied. It was all MY error..Senility must be creeping in. I failed to copy four files into the main FSX "gauges" folder. Now to address the updates. Thank you again.
Click to expand...

You're welcome:encouragement:

I think this model is outstanding and can only imagine just how good it will be when it's finished. I will try the files Sean posted (post#50) at some point in the future as it IS a more up to date version but I'm still having a lot of fun with the version you're running. The FD on this one is an absolute dream. Rarely do you come across something like this. I've yet to work out how to use the AP but that said.. it can be trimmed to fly pretty much hands off.. just a very slight climb or descent (and I mean very slight) so all you need to do is take account of the wind direction to keep it where you want it to go every now and again. Hopefully.. a few more paints will appear in the not too distant:encouragement:
ATB
DaveB:)
 
DaveB said:
.. a few more paints will appear in the not too distant:encouragement:

DaveB:)
Click to expand...

Well then you may want to try the version I'm using which is linked at the bottom of page 2. More liveries are included!

When you get to it, I recommend installing the HD cockpit textures I posted in my original post here into each livery as for some reason with this updated one, some of the included textures are blurry for some reason (may be a mip maps issue). Also, the engine responsiveness with the updates is much, much better, resulting in an easier time on final.

Also, someone posted new cockpit textures at the top of this page in the following link. I think they modify the cockpit surroundings and add weathering to the main panel. I have not tried them yet. Install at your own risk. http://www.avsim.su/forum/topic/142313-ан-24-fsx/page-35
This same person also posted green cockpit textures on the previous page about halfway down.
 
Hiya Sean:wavey:

I'd already downloaded it.. just not installed it. Have done so this afternoon. While it's cruise speed is higher, I find the takeoff roll is increased and by some degree when compared to the original release. Have you noticed this?
ATB
DaveB:)
 
DaveB said:
Hiya Sean:wavey:

I'd already downloaded it.. just not installed it. Have done so this afternoon. While it's cruise speed is higher, I find the takeoff roll is increased and by some degree when compared to the original release. Have you noticed this?
ATB
DaveB:)
Click to expand...


Noticed the increased takeoff roll too, but this is also impacted by the amount of nose-up trim that you apply prior to rolling, as well as a notch of flaps. Applying the initial flaps setting around roughly 3 degrees nose-up trim should get you off the ground fairly quickly. Also be sure to check your weight and balance as that was modified in this edition as well.
 
Yes the takeoff roll is pretty long. Did you check the weight and balance? The weight station categories are in cyrillic so I don't know what I'm actually looking at. Very Forward CG as well so that's probably the reason for so much nose up trim. With the default load it's way overweight as well.

BTW what's the drill on the load manager? I put everything in the download that did not pertain to the a/c itself into a folder in the FSX-SE directory. I open the load manager but I can't make entries. Oh has anybody found the flap indicator? It's not where it was on the FS9 version.

Otherwise fantastic aircraft. It flies very well. The English panel is a great help. The turbine engines don't seem too fussy.

Obie
 
Agree.. there's much better throttle control on this version but the very long takeoff roll had me stumped the first time I tried it. Ran off the end of the runway at Culdrose:biggrin-new: The 'original' version (that is, the first one we were all made aware of) was much easier to get off the deck (no trim required.. just one notch of flaps) but it was slow in the cruise.

I downloaded the FS9 version to get at the manual which has helped finding what (and where) a lot of the switches are. Many don't work but I'm sure they will in good time.

I've not tried the load manager yet.. not in anger. Will give it a go tomorrow.

I've not found a flap gauge either. I was hoping the flap lever would give a clue but last time I looked.. I don't think it's animated.
ATB
DaveB:)
 
There appears to be another updated version of the An-24 up on Avsim.su now, released a few days ago. The rough English translation of the changes is listed below:

http://www.avsimrus.com/f/fsx-aircrafts-79/

http://www.avsimrus.com/f/fsx-aircrafts-79/an-24rv-dlya-fsx-60784/download

The package includes two models, both with salon, but one without KLN.
In the model are added:
Enabling the video
STC
VOR-ARC switch
A scaffold in the salon
Distance Measurers
PSP choice between Course-MP
Illumination lamp UVID
Fuel rail now from the battery
Voice acting
Sound of removal from the stop
Transponder
Brake Light Bulbs
Fluxing
Control Chassis and flaps in the VC
Corrected AP from the forum
Not everything turned out as desired, but the work will continue.

Have a nice flight!
Click to expand...
 
The one with the title 'Antonov An-24RV AFL_salon' causes my copy of P3d to Crash, the other works fairly well but I did not install the co-pilot sounds.
 
Manual Antonov An-24RV

Hello!
We also fly from AIR Euronen this aircraft.
For training we need a description. Is there a description for this fantastic work?
We can not find a description in the installation.
With the many switches, the trouble is preprogrammed by a non-functioning machine.
If you have a description, I ask for help!
Greeting AIR Euronen CEO C.F.
 
Hello guys.

i dont know how to set the HSI to my desire radial of a VOR. i tried to change the course on the HSI knob and the ones on the radio panel but it doesn't seems to have an effect. can anyone help?

thanks
regards
 
You must log in or register to reply here.
Back
Top