-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
Scaled Composites Pond Racer
- Thread starter Joe P
- Start date
Thanks Joe! 
A little background on the FS9 Pond Racer:
She was built while I was stationed at Q-West, Iraq. Upon returning home this past August, I lost EVERYTHING on my laptop two months ago while upgrading to Vista SP2. The .mdl's simply went POOF! A member of my beta team luckily kept the first beta model and sent it to me. I decided to go ahead and release her, warts and all as my life has become pretty hectic (getting back to 13B basics).
I hope you enjoy her. She ain't pretty, she don't fly well, sounds like a buzzsaw, but I love her. Thanks for looking and for everyone's help over at freeflightdesign. She's up at Avsim and Flightsim.
If anyone of y'all wanna take a stab at the .air file, you more than welcome!
Blake
A little background on the FS9 Pond Racer:
She was built while I was stationed at Q-West, Iraq. Upon returning home this past August, I lost EVERYTHING on my laptop two months ago while upgrading to Vista SP2. The .mdl's simply went POOF! A member of my beta team luckily kept the first beta model and sent it to me. I decided to go ahead and release her, warts and all as my life has become pretty hectic (getting back to 13B basics).
I hope you enjoy her. She ain't pretty, she don't fly well, sounds like a buzzsaw, but I love her. Thanks for looking and for everyone's help over at freeflightdesign. She's up at Avsim and Flightsim.
If anyone of y'all wanna take a stab at the .air file, you more than welcome!
Blake
I'm sure there's enough guru's here that we can come up with some respectable flight dynamics!
Tom,
My biggest issue with her is that I/we couldn't get her to fly right. She either sat on her gear great and flew like carp, or she flew like batstank and sat horribly on her gear. Unfortunately without the .mdl, I can no longer calculate 0,0,0. Some serious voodoo is needed.
My biggest issue with her is that I/we couldn't get her to fly right. She either sat on her gear great and flew like carp, or she flew like batstank and sat horribly on her gear. Unfortunately without the .mdl, I can no longer calculate 0,0,0. Some serious voodoo is needed.
Blackbird686
SOH-CM-2025
Landings are a real thrill in this little plane :isadizzy:, gotta keep the power on after you drop the gear.
Change the "differential_braking_scale" in the brakes section to 1.000 from 0.000 and she'll turn smartly on the ramp with a little power.
Really requires a steady hand on the stick in flight. Unlike anything I have flown in FS. Very nice for a first time FS model.
Thanks for the heads up!
BB686:USA-flag:
Change the "differential_braking_scale" in the brakes section to 1.000 from 0.000 and she'll turn smartly on the ramp with a little power.
Really requires a steady hand on the stick in flight. Unlike anything I have flown in FS. Very nice for a first time FS model.
Thanks for the heads up!
BB686:USA-flag:
There's a few members here that still have working copies of ACM. There's been several "collaborative" efforts here in the past that good results!Tom,
My biggest issue with her is that I/we couldn't get her to fly right. She either sat on her gear great and flew like carp, or she flew like batstank and sat horribly on her gear. Unfortunately without the .mdl, I can no longer calculate 0,0,0. Some serious voodoo is needed.
Hey guys,
I made the worst mistake a designer could when I built her in FSDS 3.0.
0,0,0 is NOT the CG. The CG right now is at the instrument panel, when it should be at the 25% WRC. This was fixed in the second beta when I selected all the parts and pushed the Pond forwards within the program and re-did the animations. Some of the other fixes in beta 2 were the flaps, wheel hubs in the VC, rudder. Obviously with the second beta lost, I had to work with what I did.
The engines are both supercharged and produce approximately 1000hp each. She'll push upwards of 500mph. I put her in airwrench and played around with the parameters, but did nothing detailed.
I don't know squat about flight dynamics and would absolutely be tickled if y'all tweaked her. Thanks for downloading fellas.
Blake
I made the worst mistake a designer could when I built her in FSDS 3.0.
0,0,0 is NOT the CG. The CG right now is at the instrument panel, when it should be at the 25% WRC. This was fixed in the second beta when I selected all the parts and pushed the Pond forwards within the program and re-did the animations. Some of the other fixes in beta 2 were the flaps, wheel hubs in the VC, rudder. Obviously with the second beta lost, I had to work with what I did.
The engines are both supercharged and produce approximately 1000hp each. She'll push upwards of 500mph. I put her in airwrench and played around with the parameters, but did nothing detailed.
I don't know squat about flight dynamics and would absolutely be tickled if y'all tweaked her. Thanks for downloading fellas.
Blake
falcon409
SOH-CM-2025
Obio, I noticed that while trying to port it over to FSX. I fixed all that by removing the solid black alphas. FSDS and high alpha channels don't mix well. Anyway, once I fixed the alpha everything reappeared.
falcon409
SOH-CM-2025
Blake,
Just a couple of questions about your Pond Racer. I noticed that the graphic on the tail doesn't mirror itself right to left. I couldn't really find any images that showed both sides so can you tell me if that is, in fact, how they did the graphic?
Also, on the side where the Rescue arrow is placed, there are two lines of text that I can't read. The first line appears to have the word "Project" in it, but the remainder is too fuzzy to see.
I'm doing a high res version of that livery for FSX and I just wanted to verify those two before I continue. Thanks.:salute:
Just a couple of questions about your Pond Racer. I noticed that the graphic on the tail doesn't mirror itself right to left. I couldn't really find any images that showed both sides so can you tell me if that is, in fact, how they did the graphic?
Also, on the side where the Rescue arrow is placed, there are two lines of text that I can't read. The first line appears to have the word "Project" in it, but the remainder is too fuzzy to see.
I'm doing a high res version of that livery for FSX and I just wanted to verify those two before I continue. Thanks.:salute:
Falcon,
The tail graphic is indeed like that because of the pinstriping, red on top, blue on the bottom, so the number colors are reversed on either side.
The text next to the rescue should read:
TO BLOW CANOPY
PULL LANYARD (9')
Can't wait to see her in FSX. I can't run (fly) FSX on this computer, only testing to see if something works.
Take care,
Blake
The tail graphic is indeed like that because of the pinstriping, red on top, blue on the bottom, so the number colors are reversed on either side.
The text next to the rescue should read:
TO BLOW CANOPY
PULL LANYARD (9')
Can't wait to see her in FSX. I can't run (fly) FSX on this computer, only testing to see if something works.
Take care,
Blake
falcon409
SOH-CM-2025
Thanks Blake, when I finish the redo, I'll post some in-sim shots in here!:salute:
Your quite welcome sir!
The texture sheets are pretty rough and I didn't have the right tools to really do the job correctly. Believe it or not, most of the texturing was done with MSPaint, Paint.NET and GIMP. Luckily I saved most of my Pond Racer links on my home computer also.
The texture sheets are pretty rough and I didn't have the right tools to really do the job correctly. Believe it or not, most of the texturing was done with MSPaint, Paint.NET and GIMP. Luckily I saved most of my Pond Racer links on my home computer also.
falcon409
SOH-CM-2025
I'm using Paint Shop Pro 8 and basically redoing the art on a twice sized texture of 2048x2048. Shouldn't take too long to do. Very cool airplane by the way. Sad that the pilot was killed and also too bad that the airplane was never developed any further.
falcon409
SOH-CM-2025
Blake,
Here are some shots of the revised textures in place. These are 2048x2048 which FSX accepts (makes it nice for maintaining details). Of course they can be reduced back to 1024x1024 for FS9 and I think most of the detail will stay nice and sharp. I also saved them as 32bit for clarity.
For the guys that are working the FDE, I'm not sure if you've noticed this or not in FS9 but for my part, even after engine shutdown, it still sounds like the props are windmilling, even though they are stopped and all switches off. I pulled the mixture back for shutoff, so the engines shouldn't be getting any fuel. I couldn't find anything else in the cockpit that would be on and make the engines think they were still turning.
Here are some shots of the revised textures in place. These are 2048x2048 which FSX accepts (makes it nice for maintaining details). Of course they can be reduced back to 1024x1024 for FS9 and I think most of the detail will stay nice and sharp. I also saved them as 32bit for clarity.
For the guys that are working the FDE, I'm not sure if you've noticed this or not in FS9 but for my part, even after engine shutdown, it still sounds like the props are windmilling, even though they are stopped and all switches off. I pulled the mixture back for shutoff, so the engines shouldn't be getting any fuel. I couldn't find anything else in the cockpit that would be on and make the engines think they were still turning.