• There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.

    If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.

    Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.

    The Staff of SOH

  • Server side Maintenance is done. We still have an update to the forum software to run but that one will have to wait for a better time.

shaking of the sea hawk at the catapult launch

Cees Donker

Cees Donker

Administrator
Staff member
Am I the only one who is experiencing this? When I increase the throttle the plane starts to shake vehemently. What can be done about that?

Thanks for helping out!

Cees
 
Don't increase the throttle ? :biggrin-new:
I mean, the ultra-powered catapult will throw the small Hawk away at 250 knots anyways, there is no risk to stall ;)

But concerning the shaking, usually it is due to the plane slightly moving then being returned on the catapult, a kind of lack of precision, if you see what I mean. Do you set your FPS to "unlimited" or some fix value ?
 
of my many tests and using the FSX/A Catapult system, I've seen some outright bizarre behavior with different ships and aircraft models. I know some folks are experts and figuring out and fixing the quirks causing these issues but I can honestly say that in my experience, some days things work fine, other days they don't.
 
It depends on the situation, but sometimes if you run the sim at unlimited FPS, the position of the AI aircraft can be unstable. This is easy to notice when trying to fly in close formation with an AI liner, and it also happens (with less intensity) on the carrier.
 
A hint that may help a bit:
In your FSX.cfg file, scan down until you find the [REALISM] section, and add the line CatapultForceLimiter=0 //Enables the catapult systems to generate the required force for any type of aircraft.

It can make a surprizing difference. Give it a try.
Pat☺
 
I'd not noticed this with the Sea Hawk but I've not flown it for a few weeks. Just taken off from Culdrose then added a Victorious group some miles out to sea and landed on. Put her on the cat and she's rock steady. There's a slight jump when you pop either outside (or inside) for the first time while onboard but that's a normal consequence of view changing.

Concur with what Dimus said earlier. Shaking on the cat is generally caused by FR's. Some see it limited.. others see it unlimited (I'm the latter). There IS another possible cause. I remember a problem with Clemenceau (one of the Clems) which was caused by the ship texture res being high. They offered a lower res set as an alternative for those seeing the problem.
ATB
DaveB:)
 
PhantomTweak said:
A hint that may help a bit:
In your FSX.cfg file, scan down until you find the [REALISM] section, and add the line CatapultForceLimiter=0 //Enables the catapult systems to generate the required force for any type of aircraft.

It can make a surprizing difference. Give it a try.
Pat☺
Click to expand...

I have that already done that, no cigar.:untroubled:

No other plane has it. Oh well, I'll live with it.

:biggrin-new:

Cees
 
Which carrier are you seeing this on Cees.. yours? Happy to take a look if you're willing to let it go:encouragement:

ATB
DaveB:)
 
I've been wanting to ask you to take a look at the Karel Doorman....When I'm home from work I'll send you a link?

:biggrin-new:

Cees
 
Hmm.. unless my Sea Hawk has different contact points (and I can't imagine how they would be).. it's not that. I've landed on and cat launched half a dozen times and it refuses to shake on the cat. My realism settings are a notch over half so I put them all to full and it made no difference. Landed on again.. sat on the cat and tweaked the FR from 30 to unlimited. Immediately.. the crane and tractor started shaking like an out of balance spin-dryer but the Sea Hawk remained steady on the cat with throttles firewalled.

Just in case.. here are my contact points..

[contact_points]
static_pitch = 1.431 //degrees (pitch when loaded on ground)
static_cg_height = 4.174 //feet, altitude of CG when at rest on the ground
gear_system_type=0
max_number_of_points=7
tailwheel_lock=0
point.0= 1, 9.928, 0.000, -4.75, 9975, 0, 0.90, 30.000, 0.200, 2.800, 3.8, 4.000, 4.000, 0
point.1= 1, -1.712, -4.120, -4.30, 9975, 1, 2.00, 0.000, 0.570, 0.300, 0.8, 5.000, 5.000, 2
point.2= 1, -1.712, 4.120, -4.30, 9975, 2, 2.00, 0.000, 0.570, 0.300, 0.8, 5.000, 5.000, 3
point.3= 2, -0.166, -21.568, 0.698, 1800, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0
point.4= 2, -0.176, 21.524, 0.592, 1800, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0
point.5= 4, -17.883, 5.000, 0.051, 1800, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0
point.6= 4, -17.883, -5.000, 0.051, 1800, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0

I know you're using AIC and not TP to call the ships (as am I) so I really don't know what else it could be. Would water resolution make a difference? Mine is cranked down a little in an attempt to stop sea tiles going dark blue (not drawing) when I have a lot of ships in formation (it fails btw).
ATB
DaveB:)
 
You must log in or register to reply here.
Back
Top