• Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.

    Post 16 Update

    Post 17 Warning old domain name stealing credentials

  • Special Server Maintenance

    Just when you think you have everything running some what better...

    You get a message from the Hosting company. Short story they need to move us to a new server. I have been working with them to plan a good date for all concerned. Here is what we have come up with as a schedule.

    1. November 4th 17:00 -5UTC shut off the forums and start backup proceedures. During this time there will be no access to the forums or the Resource Section.
    2. November 5th Continue with Backups and download same until complete.
    3. November 6th 7:00 turn over server to hosting company to move system to new server
    4. November 7th - 8th restore backups and upgrade forum software.

    If all goes well we should be back online on November 8th.

    To keep you updated we will post updates on AVSIM forums.

    Thank you for your support.

SR22 Opinions

Tom Clayton

Administrator
Staff member
I just noticed that the SR22 from the original Premium Deluxe package is available to buy in the Marketplace. Is it worth the $10 to buy it, or should I pass?
 
I like it, the G1000 cockpit feels more like a Dreamliner than a GA plane. Plus there are dozens of superb freeware liveries by Ryan and TimHH for it too.
 
Well, I bought it, but there's an issue. The sale page for the plane shows two distinct liveries, but only one is included with the actual download. I posted on the MS forum, but no one in authority has responded. I'm also opening a support ticket with the following:
The purchase page for the SR22 advertises at least two liveries, one with stripes on the fuselage, and another with colors on the upper wingtips. After purchasing, there is only one livery available to select, and only one texture folder inside the SimObjects\Airplanes\Asobo_SR22 folder.

Surely this must be some sort of mistake, because I find it hard to believe that a reputable company such as Microsoft would ever engage in blatant "Bait and Switch" advertising such as this.
 
Well, I bought it, but there's an issue. The sale page for the plane shows two distinct liveries, but only one is included with the actual download. I posted on the MS forum, but no one in authority has responded. I'm also opening a support ticket with the following:
A couple of silly questions Tom:
Did you restart the sim before loading the SR22?
Have you checked your Library for any inactive SR22 liveries - they may have to be activated or downloaded separately.
 
Just finished a short flight. It's a nice little flyer - decently fast for a single. My only gripe (as with so many other low wing singles) is that I have to keep switching tanks to maintain balance.

The G1000 setup is different from any other plane too. Most of the controls are in the center console instead of on the bezels. It takes a little getting used to, but it works well.
 
If you want a more luxury one, look at FS.to for liveries (matching co-piloting dog not included)
There is also a nice (payware) sound pack available

Screenshot (729).pngScreenshot (730).pngScreenshot (731).png
 
The liveries I've seen either have baked in reg's or none at all. I was able to open the default stripe livery and retune the stripes to blue shades instead of those dull browns. But what I really want is a mod that will allow the copilot to be visible in the cockpit.
 
The liveries I've seen either have baked in reg's or none at all. I was able to open the default stripe livery and retune the stripes to blue shades instead of those dull browns. But what I really want is a mod that will allow the copilot to be visible in the cockpit.
There is no mod but you can modify the "model" file. (make a backup before you start!)
1. Open your Asobo_SR22 file (most likely in MSFS/ official) and then the "mod" file.
2. You will find a "Cirrus_interior.xml. Open this with Notepad++ and
3. change
<LOD minSize="150" ModelFile="SR22_COCKPIT_LOD00.gltf"/> to
<LOD minSize="150" ModelFile="SR22_COCKPIT_LOD01.gltf"/>
4. Save and refresh - done
That's the simpliest way but do not work with all mods. Some reqiure more attention but in general, you can even add a crew to airplanes that do come without any visible avatars.
 
Last edited:
First, a bit of background. I still fly FSX, but that's another story. I bought a laptop a year or so ago and got the Prem. Dlx. version of 2020. I've never been one to dive into the "new" so I took my time setting up 2020 and mostly enjoy it, including the Cirrus. It fits nicely into some of my sim flying and (other than the need to look down at that center stack) it's been a pleasant experience.
Then the laptop Mobo died... mostly painless - it was replaced with a new machine under warranty and I didn't have a backup but that's OK. No loss except the need to re-install some stuff but that's probably a blessing too. So now I'm at the point of getting back to flying 2020.

However, I'm reminded that a friend has a SR-22 with a unique paint scheme (Training Air Wing 6, Pensacola). I'm at an age where I don't really want to go through the hoops of learning new paint methods, so if someone is willing to tackle a project, it would be great...

1784829434332.png

If there's a volunteer, I have design drawings and close-ups of all the decals and stencils. PM me and we can discuss it.
 
There is no mod but you can modify the "model" file. (make a backup before you start!)
1. Open your Asobo_SR22 file (most likely in MSFS/ official) and then the "mod" file.
2. You will find a "Cirrus_interior.xml. Open this with Notepad++ and
3. change
<LOD minSize="150" ModelFile="SR22_COCKPIT_LOD00.gltf"/> to
<LOD minSize="150" ModelFile="SR22_COCKPIT_LOD01.gltf"/>
4. Save and refresh - done
That's the simpliest way but do not work with all mods. Some reqiure more attention but in general, you can even add a crew to airplanes that do come without any visible avatars.
It's an encrypted plane, so no xml files at all unfortunately.
 
An undenyable advantage from buying from Marketplace šŸ˜Ž. It's like buying a 4door sedan with the rear dors permanently locked.
 
There is no mod but you can modify the "model" file. (make a backup before you start!)
1. Open your Asobo_SR22 file (most likely in MSFS/ official) and then the "mod" file.
2. You will find a "Cirrus_interior.xml. Open this with Notepad++ and
3. change
<LOD minSize="150" ModelFile="SR22_COCKPIT_LOD00.gltf"/> to
<LOD minSize="150" ModelFile="SR22_COCKPIT_LOD01.gltf"/>
4. Save and refresh - done
That's the simpliest way but do not work with all mods. Some reqiure more attention but in general, you can even add a crew to airplanes that do come without any visible avatars.
Hi Scotsman,

This is something I've been interested in, and your method is very straight-forward. I have had success using it on the LHC Piper Pacer. However, in addition to the passenger, the mod also places the pilot in the cockpit (makes sense, I suppose), requiring moving my eyepoint forward to avoid having to look "through" the pilot model to see the panel and beyond. Do you know of a way to keep the pilot from appearing as well? I understand it may not be practical to respond with details since (as you say) "some [aircraft] require more attention".

Either way, thanks for posting this process. It provides me with a new place to start.


Regards,
Michael
 
As long as you have N++ open, try this method - it only affects the copilot. I've used it with the G1000 C172 and the stock TBM9. It works on most, but might also add the pilot. It's worth a try.

 
Hi Scotsman,

This is something I've been interested in, and your method is very straight-forward. I have had success using it on the LHC Piper Pacer. However, in addition to the passenger, the mod also places the pilot in the cockpit (makes sense, I suppose), requiring moving my eyepoint forward to avoid having to look "through" the pilot model to see the panel and beyond. Do you know of a way to keep the pilot from appearing as well? I understand it may not be practical to respond with details since (as you say) "some [aircraft] require more attention".

Either way, thanks for posting this process. It provides me with a new place to start.


Regards,
Michael
One way ist to use mods from Condor7777 on FS.to "Pilot/Copilot always visible..." and/or "head removal for defailt Asobo...". On YouTube, you can find a detailed Tutorial on modifying the .XML and Lod.gltf files inside the model archive. Looks difficult first but ist at least no rocket science at all. That's the way I do it. Unfortunately, it does not work If those essential files are encrypted and also some airplanes (e.g. the Carenado Mooney and PA44) do react to that modifications with a complete freezing of all cockpit knobs and levers.
 
Back
Top