There's Nothing Like Fresh Mesh ...
- Thread starter Milton Shupe
- Start date
Mdk, our focus now is on the turboprop variant, a very nice flyer as well, powerful and fun.
After that is done, I will be back on the A-20 Havoc full time.
Attachments
MaddogK
Sim Junkie
Who needs a Widgeon when you can have this MALLARD!
True, I just hope I can get the bigger Mallard into the puddles my Widgeon can get into during my bush flights.
nigel richards
Charter Member
lemonadedrinker
Charter Member
Hi,
One effect I'm seeing is the water draining from the underside as the aircraft rises...absolutely amazing to watch!
Andy.
One effect I'm seeing is the water draining from the underside as the aircraft rises...absolutely amazing to watch!
Andy.
Attachments
Just had a question regarding carb heat and why the overhead levers do not turn on the carb heat.
The problem is that the fuel metering parameter needs to be changed to use a "1" as follows.
fuel_metering_type=1
This parameter is in the aircraft.cfg in the Piston Engine section.
The problem is that the fuel metering parameter needs to be changed to use a "1" as follows.
fuel_metering_type=1
This parameter is in the aircraft.cfg in the Piston Engine section.
Mdk,
Would this Widgeon work for you?
http://www.sim-outhouse.com/sohforums/showthread.php?100208-Flysimware-G44-Widgeon
MaddogK
Sim Junkie
Been flying that one for years, thats why I asked about a possible fresh one in planning. If I wasn't so cheap I'de have the JF one already.
The Flysimware one is sadly non-FS9, but boy- whats a beauty.
[h=2][/h]
A personnal upgrade : I put a more modern HSI and VOR1 indicator in my Mallard cockpit. The modification can be made as follow :
in the panel.cfg [vcockpit01] part, replace the line
gauge05=ST_Mallard!VOR1_Indicator, 261,390,187,187
by
gauge05=Cessna!VOR1, 261,390,187,187
and
gauge45=ST_Mallard!RMI_D18, 728,137,201,201
by
gauge45=Cessna208!Horizontal-Indicator, 725,140,208,208
the gauges used are default but you can replace by what you wants ! I'm happy with that now !
As I never use the 2d cockpit, this modification is available only for VC, but I think it will be as easy to do to it in the [window00] part.
in the panel.cfg [vcockpit01] part, replace the line
gauge05=ST_Mallard!VOR1_Indicator, 261,390,187,187
by
gauge05=Cessna!VOR1, 261,390,187,187
and
gauge45=ST_Mallard!RMI_D18, 728,137,201,201
by
gauge45=Cessna208!Horizontal-Indicator, 725,140,208,208
the gauges used are default but you can replace by what you wants ! I'm happy with that now !
As I never use the 2d cockpit, this modification is available only for VC, but I think it will be as easy to do to it in the [window00] part.
nigel richards
Charter Member
A personnal upgrade : I put a more modern HSI and VOR1 indicator in my Mallard cockpit. The modification can be made as follow :
in the panel.cfg [vcockpit01] part, replace the line
gauge05=ST_Mallard!VOR1_Indicator, 261,390,187,187
by
gauge05=Cessna!VOR1, 261,390,187,187
and
gauge45=ST_Mallard!RMI_D18, 728,137,201,201
by
gauge45=Cessna208!Horizontal-Indicator, 725,140,208,208
the gauges used are default but you can replace by what you wants ! I'm happy with that now !
As I never use the 2d cockpit, this modification is available only for VC, but I think it will be as easy to do to it in the [window00] part.
We always love to see people doing some creative tailoring to their personal tastes.
Always prefer using VC panels on Milton's projects, too.
wellis
SOH-CM-2025
Working through the list: just uploaded version two of three paints done last fall for the Alpha release. The paints have been updated and improved as needed for the new models and paint kit: N98BS and N168WS modern and classic model Texaco. There are several more of these I plan to update to the new release. I also have 4096 textures (at 32 bit they are quite large, however) for them all, so if there is any interest in those I will provide a dropbox link in the future.
Attachments
wellis,
I really appreciate all your efforts producing so many beautiful paint schemes for the Mallard. Thank you Sir!
I really appreciate all your efforts producing so many beautiful paint schemes for the Mallard. Thank you Sir!
wellis
SOH-CM-2025
wellis,
I really appreciate all your efforts producing so many beautiful paint schemes for the Mallard. Thank you Sir!
The pleasure is entirely mine sir! These models are simply marvelous. Just discovered that I messed up on the Texaco upload, but I'll have it up shortly. (also have several in the works for the turbo when it becomes available)