Seahawk72s
SOH-CM-2023
Adoption
Hi Javier,
Any interest in adopting an Admiral Kuznetsov carrier model..?
It needs a new home.
tc
Hi Javier,
Any interest in adopting an Admiral Kuznetsov carrier model..?
It needs a new home.
tc
-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
USS Nimitz released
- Thread starter Thrawn
- Start date
After I release the service-pack I have to complete the 80's version of the carriers (with an accurate airwing) and my new USS Midway model (2010). Only after that I'll consider another project like the Kuznetsov.
As for N332DW's question about the elevators, the technique I used is quite simple. Just link the platform to an animated part. As you said, platforms can't be animated, but hierarchy and links work beautifuly.
Javier
Seahawk72s
SOH-CM-2023
Kuznetsov and Varyag
Hi Javier,
I understand. The work you are doing for carriers has taken FS to a different level and as you know very much appreciated.
The Admiral Kuznetsov is interesting because of her own history and that of her sister ship which now belongs to the Chinese and is being overhauled and upgraded.
http://www.freewebs.com/jeffhead/redseadragon/varyagtransform.htm
Again my thanks for the Nimitz..!
tc
Hi Javier,
I understand. The work you are doing for carriers has taken FS to a different level and as you know very much appreciated.
The Admiral Kuznetsov is interesting because of her own history and that of her sister ship which now belongs to the Chinese and is being overhauled and upgraded.
http://www.freewebs.com/jeffhead/redseadragon/varyagtransform.htm
Again my thanks for the Nimitz..!
tc
peter12213
FSX Acceleration!
yes thats what we need an admiral kuznetsov to the standard of the nimitz then us ruskophiles will be over the moon!!
J
JamesChams
Guest
Mr. Javier "Thrawn",
Also, Mr. Voodoo can be reached over at FSDreamTeams site here: http://www.fsdreamteam.com/forum/index.php?action=profile;u=513
Next, I do want to mention a "bug" (which you may or may not be aware of) in the "hardening of the deck" near the rear elevator. If I park an aircraft onto the elevator and it is lower to the hanger deck below, if I reverse the aircraft (using SHIFT + P "Pushback"), about half way between the lower deck and the elevator (horizontally), the aircraft drops to the waterline (triggering a crash in FSX). I don't believe the lower deck is hardened enough in this area; I've noticed that if I drive it forward it can cause this too; am I wrong in this?
PS: If you add/animate a catapult shuttle with the vapor effect connect to the FSX function of Arm Capatult ( " SHIFT + I " animate shuttle and bring it to aircraft nose wheel) & ( " SHIFT + SPACEBAR " launch shuttle forward and trigger vapor effect) and fix the above "Hardening deck" issue in the next service pack; I'll buy you a
or 
. 
Finally, in my dreams 
, I'd like to see some "real activity" on the deck with, a Fuel pumping location and manned crew on deck, animated tow vehicles moving aircraft around (above what you've already done), and crew giving hand signals directions (perhaps connected to your use of default FSX function keys to say raise the tailhook) to the pilot, etc. [i.e. If you make a trap (landing) the yellow-shirt clears you to raise your tailhook, fold/sweep your wings, and to taxi and park, etc. ... AND, if you approach the catapult, the animated crew line you up correctly ... and if you arm the catapult, the shooter launches you, etc.] ... I have dreams to :USA-flag:...
PS: I'd like more USA/CCCP/UK Carriers too; when you have the time, after your 80's versions.
Thank you for your time and consideration to my rather "large" requests.
Thank you for the update; no worries about needing a break...you've definitely earned it.... I'll start working on the next update release.
This new steam effect seems very interesting, I´ll get in touch with the author to request permission to include it. Well, I just wanted to let you guys know that this project is still alive
Also, Mr. Voodoo can be reached over at FSDreamTeams site here: http://www.fsdreamteam.com/forum/index.php?action=profile;u=513
Next, I do want to mention a "bug" (which you may or may not be aware of) in the "hardening of the deck" near the rear elevator. If I park an aircraft onto the elevator and it is lower to the hanger deck below, if I reverse the aircraft (using SHIFT + P "Pushback"), about half way between the lower deck and the elevator (horizontally), the aircraft drops to the waterline (triggering a crash in FSX). I don't believe the lower deck is hardened enough in this area; I've noticed that if I drive it forward it can cause this too; am I wrong in this?
PS: If you add/animate a catapult shuttle with the vapor effect connect to the FSX function of Arm Capatult ( " SHIFT + I " animate shuttle and bring it to aircraft nose wheel) & ( " SHIFT + SPACEBAR " launch shuttle forward and trigger vapor effect) and fix the above "Hardening deck" issue in the next service pack; I'll buy you a
or . Finally, in my dreams , I'd like to see some "real activity" on the deck with, a Fuel pumping location and manned crew on deck, animated tow vehicles moving aircraft around (above what you've already done), and crew giving hand signals directions (perhaps connected to your use of default FSX function keys to say raise the tailhook) to the pilot, etc. [i.e. If you make a trap (landing) the yellow-shirt clears you to raise your tailhook, fold/sweep your wings, and to taxi and park, etc. ... AND, if you approach the catapult, the animated crew line you up correctly ... and if you arm the catapult, the shooter launches you, etc.] ... I have dreams to :USA-flag:...PS: I'd like more USA/CCCP/UK Carriers too; when you have the time, after your 80's versions.
Thank you for your time and consideration to my rather "large" requests.
I don't wish to contradict James -- and it's not in my power to countermand. But if I had my druthers, an update would not add new animations. One of the great things about Thrawn's existing Nimitz model is the framerates. I can fly on and off all day long, enjoy the eyecandy, and still get high FPS. I like eyecandy! But if framerates aren't smooth, I end up flying something else. Right now, the Nimitz is perfect, so far as I'm concerned: lots of visual interest, working wires, working cats, and it's all smooth.
Steam would be cool...
Steam would be cool...
J
JamesChams
Guest
I see your point Mr. David "Dswo" ... Would you be accepting of at least this animation (below), if it doesn't eat-up too many FPS' ?
James,
Thanks for the link to MrVoodoo, I'll definitely try to add his steam effect. I wanted to include the shuttle animation in the initial release but currently I don't know to animate it. I can bring the shuttle to player's aircraft nose with SHIFT+I but I have no idea how to sinchronize it with the plane as it is launched. If someone has an idea... The "hardening deck" issue was on top of the list and it is already fixed.
The service pack will address some issues, add some more features and an additional UNREP configuration, but I agree with you David, keeping it FPS friendly has always been one of my top priorities, so you can rest assured, the new version performance will remain the same.
Javier
Thanks for the link to MrVoodoo, I'll definitely try to add his steam effect. I wanted to include the shuttle animation in the initial release but currently I don't know to animate it. I can bring the shuttle to player's aircraft nose with SHIFT+I but I have no idea how to sinchronize it with the plane as it is launched. If someone has an idea... The "hardening deck" issue was on top of the list and it is already fixed.
The service pack will address some issues, add some more features and an additional UNREP configuration, but I agree with you David, keeping it FPS friendly has always been one of my top priorities, so you can rest assured, the new version performance will remain the same.
Javier
J
JamesChams
Guest
Mr. Javier,
Thank you for all this work...
i.e. the Cat. Shuttle to retract (go from the front of the Launch track to the Aircraft's nose) using the [ SHIFT + I ] keys (which triggers the Arm/Catapult and raises the blast shield also) and the [ SHIFT + SPACEBAR ] (which launches the Aircraft forward in FSX) which would then animate the shuttle to go forward, simulating the pulling of the aircraft, and the vapor effect makes steam. All it would then need is the correct timing to make it all look correct and the function would be modeled and transparent to the user. The shuttle would need only go forward (to the bow of ship) and retract to the launch point (Aircraft's nose wheel area of the Catapult) ONLY when the users aircraft is in the correct position for launch and ONLY by the use of those Function Key-code Parameters. It would need to be coded into the model as Key Press Events etc. Fred "Horten229" and I are doing this for the F-16 new AN/APG-68 & EHSI and it works very nicely and is independant of user-key assignments (so it doesn't matter which keys users have the function works based on both default and user keys assignments).
Thanks for your consideration. :ernae:
Also, regarding the animated Crew... would it be possible to make a version of them as an Add-in during installation. So, that user can choose wheather or not they want to have them, for issues like FPS, etc. This way they would be optional and still available should someone, like me, would want them?
PS: Thank you for fixing the "broken/Harden" deck issue.
Thank you for all this work...
Might I make a suggest... How about connecting (animations) to the preset function keys for Catapult arm and launch?
i.e. the Cat. Shuttle to retract (go from the front of the Launch track to the Aircraft's nose) using the [ SHIFT + I ] keys (which triggers the Arm/Catapult and raises the blast shield also) and the [ SHIFT + SPACEBAR ] (which launches the Aircraft forward in FSX) which would then animate the shuttle to go forward, simulating the pulling of the aircraft, and the vapor effect makes steam. All it would then need is the correct timing to make it all look correct and the function would be modeled and transparent to the user. The shuttle would need only go forward (to the bow of ship) and retract to the launch point (Aircraft's nose wheel area of the Catapult) ONLY when the users aircraft is in the correct position for launch and ONLY by the use of those Function Key-code Parameters. It would need to be coded into the model as Key Press Events etc. Fred "Horten229" and I are doing this for the F-16 new AN/APG-68 & EHSI and it works very nicely and is independant of user-key assignments (so it doesn't matter which keys users have the function works based on both default and user keys assignments).
Thanks for your consideration. :ernae:
Also, regarding the animated Crew... would it be possible to make a version of them as an Add-in during installation. So, that user can choose wheather or not they want to have them, for issues like FPS, etc. This way they would be optional and still available should someone, like me, would want them?
PS: Thank you for fixing the "broken/Harden" deck issue.
sparouty
Charter Member
Hi Javier,
May be you already know that, but there a FSX animation for the shuttle called "shuttle_0_pct, which is linked to the variable "CATAPULT STROKE POSITION". So, it's trigger by the catapult shot... but (there always a "but" with the SDK...), but I never manage to make the shuttle stay close/linked to the launchbar during the launch...
By the way, I would like to have some explanation: when steam is supposed to appear? With FSX carrier, the steam appears during the launch, along the rail and following the plane movement. Is there steam at other moment, I mean in the real life?
Regards,
Sylvain
navychief8
Charter Member
Sylvain
Any updates on when your new Clemenceau will be available?
Any updates on when your new Clemenceau will be available?
sparouty
Charter Member
Hi NavyChief8,
The release is now ready. I packaged it yesterday, and it is already available on my favourite French site (100% on navy FSX stuff : http://perso.numericable.fr/sonny3/RFN/ then click on "FSX Navires").
Unfortunately, I didn't have time to finish the English package for main FS web sites. I will post some news soon , next week I hope, because I'm off for few days
...
Regards
Sylvain
PS: this thread is impressive, more then 35 000 views!!!
The release is now ready. I packaged it yesterday, and it is already available on my favourite French site (100% on navy FSX stuff : http://perso.numericable.fr/sonny3/RFN/ then click on "FSX Navires").
Unfortunately, I didn't have time to finish the English package for main FS web sites. I will post some news soon , next week I hope, because I'm off for few days
...Regards
Sylvain
PS: this thread is impressive, more then 35 000 views!!!
J
JamesChams
Guest
Merci Mr. Sylvain!
CrisGer
Charter Member
this is a wonderful project and many thanks for its sharing with us. I have a question about how to run the EZWalk cam add on along with it, as i would love to be able to explore the ship....
do you have to have both programs running at the same time? ie...does it change how the cam works in FS without any more adjustments... sort of making the camera a 'no collision" camera? i am slow so did not understand what Javier meant by saying...."then you go to FS" if that meant to start up EZWalk first, then start up FS and then use that function....???
any help much appreciated.<!-- / message --><!-- sig -->
__________________
do you have to have both programs running at the same time? ie...does it change how the cam works in FS without any more adjustments... sort of making the camera a 'no collision" camera? i am slow so did not understand what Javier meant by saying...."then you go to FS" if that meant to start up EZWalk first, then start up FS and then use that function....???
any help much appreciated.<!-- / message --><!-- sig -->
__________________
peter12213
FSX Acceleration!
Someone need to model the new HMS Queen Elizabeth II class carriers currently being built in the UK, there gunna be the worlds most advanced carriers specifically built for the JSF, thats what us Brits want!!
J
JamesChams
Guest
Yes, Mr. David "DSWO"!!! That is exactly why I thanked him; Also, if you notice he's animated the crew and the shuttle and there is NO FPS hit.
:ernae:Now, all we have to do is get Mr. Javier and Mr. Sylvain to exchange ideas some more and we'll have everything we want in these packages and it will be user/PC-friendly too.
PS: I second the request for the HMS Queen Elizabeth's Carrier to go along with Mr. Dino's upcoming F-35.
J
JamesChams
Guest
Mr. Javier,
Here are some screenshots, that I took, of Mr. Sylvain's Carrier model having animated Crew and Cat. Shuttle with Vapor effects; please see the frame rates readout; they were exactly the same before I did the Catapult-Arm key-stroke [SHIFT + I] then the launch [SHIFT + SPACEBAR] and it looks really awesome ("cool") to have them included in these models. I would love to see that in your next update of your Nimitz/Esienhower and a is waiting for you.:ernae:
Gracious! :mixedsmi:
PS: Monsieur Sylvain - Très bien, merci.
Here are some screenshots, that I took, of Mr. Sylvain's Carrier model having animated Crew and Cat. Shuttle with Vapor effects; please see the frame rates readout; they were exactly the same before I did the Catapult-Arm key-stroke [SHIFT + I] then the launch [SHIFT + SPACEBAR] and it looks really awesome ("cool"
) to have them included in these models. I would love to see that in your next update of your Nimitz/Esienhower and a is waiting for you.:ernae:Gracious! :mixedsmi:
PS: Monsieur Sylvain - Très bien, merci.
J
JamesChams
Guest
Mr. Javier,
After the above information that I posted (above), is it now possible to include the animated crew and vapor effects into the Nimitz and still keep it FPS friendly?
A Donationware version with all those features would be welcomed by me... but, I don't speak for everyone here...and I'm sure that they would also want it to be frame rate (FPS) for mid-to-low end systems.
Thanks!
After the above information that I posted (above), is it now possible to include the animated crew and vapor effects into the Nimitz and still keep it FPS friendly?
A Donationware version with all those features would be welcomed by me... but, I don't speak for everyone here...and I'm sure that they would also want it to be frame rate (FPS) for mid-to-low end systems.
Thanks!
sparouty
Charter Member
Hi,
For steam effects I'm using attached points effects with visibility properties.
But (there's always a "but" with the SDK...), it seems that the steam doesn't showing up all the times
Another precision, the shooter animation I added is triggered/linked by the the blastshield animation and so it is limited to 100 frames which is short for a complex movement...
Javier, let me know if you want an sample of my captapult animations?
Regards
Sylvain
For steam effects I'm using attached points effects with visibility properties.
But (there's always a "but" with the SDK...), it seems that the steam doesn't showing up all the times
Another precision, the shooter animation I added is triggered/linked by the the blastshield animation and so it is limited to 100 frames which is short for a complex movement...
Javier, let me know if you want an sample of my captapult animations?
Regards
Sylvain