Virtual LSO for FSX/P3D

No prob, NC. Hard for me to remember what I had for breakfast.

I knew I had a screenshot somewhere showing the VS LSO on the deck and in the popup.

2013-6-3_12-57-18-204_zps833b65cd.jpg
 
Crazy Tanker

I opted for a Tanker and followed it and this is what I saw when I closed in. I never got to tank but as the tanker pulled away, it's tail unfolded to the full upright position :biggrin-new:


TANKER.jpg
 
No Call Clara or Ball voices

would appreciate any info on how they set up the manual ball event or manual clara event. For now, all I get it wave off sound. I've watched utoobs on a demo landing approach and could hear
the call ball and they got a OK 3 (Perfect landing). Would like info on what to use to make the clara and call ball setup and working.


vlso.jpg
 
I changed the "Ball" to "Key_Request_tow_plane". Something I didn't use in flying.

The command "toggle_water_rudder" is used by Dino's S-3 in the model to fold the vertical stabilizer so when you use it in vLSO it folds it.

Clara I used "toggle_water_ballast_valve"

Change your call sign and make sure speakers match the ones you have and your good to go.

Currently it doesn't work in P3D V3 so I am on the sidelines until a new version is released.

It is not to difficult to add new planes. Just look at the defaults and come as close as you can to one you want to add.


Russ
 
Appreciate the help, I copied and paste the commands you used. Now I guess that all this will set up the clara & ball event, so do you then toggle the clara and ball buttons for both?
If so, I didn't hear anything. About all I get is a waveoff or waveoff pattern. The clara and ball event is what I am most interested in getting set up so that when I use them, I will
get responses from LSO.



rsgunner said:
I changed the "Ball" to "Key_Request_tow_plane". Something I didn't use in flying.

The command "toggle_water_rudder" is used by Dino's S-3 in the model to fold the vertical stabilizer so when you use it in vLSO it folds it.

Clara I used "toggle_water_ballast_valve"

Change your call sign and make sure speakers match the ones you have and your good to go.

Currently it doesn't work in P3D V3 so I am on the sidelines until a new version is released.

It is not to difficult to add new planes. Just look at the defaults and come as close as you can to one you want to add.


Russ
Click to expand...
 
Yes I did set up separate buttons for Ball and Clara.

I have about 10 carriers running off of Pensacola and use NASP as home base.

When I launch the sim program I am within range of at lease 3 carriers.

It is the FCLP that doesn't work in P3D V3. Carrier portion works fine.

I need to program my stick again.

Russ
 
You must log in or register to reply here.
Back
Top