Wake Up Free TDS 787 Released

Okay, regarding the VC, I just looked at the panel cfg and this is what I found.....


[VCockpit01]
size_mm=512,512
pixel_size=512,512
texture=$777_1
background_color=0,0,0

gauge00=Boeing777-300!PFD, 0, 222, 255, 288
gauge01=Boeing777-300!MFD, 256, 222, 255, 288
gauge02=Boeing777-300!Autopilot, 0, 0, 512, 58
gauge03=Boeing777-300!Clock, 1, 96, 122, 125
gauge04=Boeing777-300!Backup_Attitude, 256, 94, 125, 125
gauge05=Boeing777-300!Backup_Airspeed, 128, 94, 125, 125
gauge06=Boeing777-300!Backup_Altimeter, 384, 94, 125, 125
gauge07=Boeing777-300!Aileron_Trim_Ind, 0, 59, 81, 34
gauge08=Boeing777-300!Rudder_Trim_Ind, 83, 59, 81, 34
gauge09=Boeing777-300!Autostart, 166, 59, 30, 34


[VCockpit02]
size_mm=256,256
pixel_size=256,256
texture=$777_2
background_color=0,0,0

gauge00=Boeing777-300!Comm 1, 0, 0, 127, 54
gauge01=Boeing777-300!Comm 2, 0, 54, 127, 54
gauge02=Boeing777-300!Nav 1, 0, 108, 127, 54
gauge03=Boeing777-300!Nav 2, 0, 162, 127, 54
gauge04=Boeing777-300!Transponder, 129, 0, 127, 49
gauge05=Boeing777-300!ADF, 129, 49, 127, 54
gauge06=Boeing777-300!Audio, 0, 216, 125, 26
gauge07=Magnetic_Compass!Magnetic-Compass, 172, 103, 84, 82
gauge08=Boeing777-300!Pitch_Trim_Ind, 128, 103, 44, 152
gauge09=Boeing777-300!Beacon_Nav_Light_Switch, 173, 187, 83, 50

[VCockpit03]
size_mm=512,512
pixel_size=512,512
texture=$Tds_ACU
background_color=0,0,0

gauge00=Tds788!Tds_AdvInit, 140,80,140,80
gauge01=Tds788!Tdsgearheight, 140,80,140,80
gauge02=Tds788!TdsNosegearsteerling, 140,80,140,80
gauge03=Tds788!Tdsgearretract, 140,80,140,80
gauge04=Tds788!TdsSpoiler, 140,80,140,80
gauge05=Tds788!TdsFlap, 140,80,140,80
gauge06=Tds788!TdsAileron, 140,80,140,80
gauge07=Tds788!TdsRudder_Elev, 140,80,140,80
gauge08=Tds788!TdsEngRev, 140,80,140,80
gauge09=Tds788!TdsWingflex, 140,80,140,80
gauge10=Tds788!TdsAUX, 140,80,140,80
gauge11=Tds788!TdsSEA, 140,80,140,80
gauge12=Tds788!Tdsflasher, 140,80,140,80

[VCockpit04]
size_mm=512,512
pixel_size=512,512
texture=$EXTANIMBASE
background_color=0,0,0

gauge00=EXT_TEXTURE_ANIM!EXTTEST, 0, 0, 512, 512

Unless this is an updated file or this VC sux I think you guys might have wasted time importing one from another source.
 
The transfer of data seemed to work fine. Now if I could get this modular unit to install itself as the 787 cockpit, all would be good. The module acts like a separate aircraft installation.
 
It appears the 737 cockpit module doen't know how to attach to the 787 fuselage
Click to expand...

It's attached just fine olderndirt, that's how it's supposed to look and you are almost there. Your eyepoint settings just need to be adjusted so the cockpit view opens inside rather than outside the VC. See the coordinates above or try mine (using the 737-800 default VC + some custom textures from simviation). You can move inside it also using the Shift + Return/Backspace, Ctrl + Return/Backspace keys.

NB: when splicing in a different VC I find you need to exit the sim altogether once or twice for everything to work.

[Views]
eyepoint = 38.000, -1.759, 2.10
 
expat said:
It's attached just fine olderndirt, that's how it's supposed to look and you are almost there. Your eyepoint settings just need to be adjusted so the cockpit view opens inside rather than outside the VC. See the coordinates above or try mine (using the 737-800 default VC + some custom textures from simviation). You can move inside it also using the Shift + Return/Backspace, Ctrl + Return/Backspace keys.

NB: when splicing in a different VC I find you need to exit the sim altogether once or twice for everything to work.

[Views]
eyepoint = 38.000, -1.759, 2.10
Click to expand...
Your eyepoint numbers worked perfectly however all the flat screens are still off. Get an occasional flash from the brightness control but that's it. Navcom frequency selects are lit.
 
You will need to have entries to the default 737-800 gauges in your panel.cfg (along with the new ones from TDS)

Mine looks like this but I have some "special gauges in their you might not have and need to swap with some others you do have:



[Vcockpit01]
Background_color=23,17,52
size_mm=1024,1024
visible=1
pixel_size=1024,1024
texture=$737_1
gauge00=B737_800!overhead_popup, 4,4,581,529
gauge01=B737_800!pfd, 4,532,260,260
gauge02=B737_800!trim_popup, 6,801,194,154
gauge03=B737_800!annunciator_speed_brake_armed, 6,961,51,28
gauge04=B737_800!annunciator_below_glideslope, 6,994,52,27
gauge05=B737_800!annunciator_panel_1, 64,961,132,40
gauge06=B737_800!mfd, 347,536,260,260
gauge07=B737_800!autopilot, 205,801,463,90
gauge08=B737_800!annunciator_panel_gear, 205,895,66,71
gauge09=B737_800!annunciator_le_flaps, 204,974,100,28
gauge10=B737_800!annunciator_auto_brake_disarm, 275,895,47,27
gauge11=B737_800!TFR_RDR_On_Off, 275,925,37,27
gauge12=B737_800!flap_indicator, 308,960,59,59
gauge13=B737_800!compass, 325,895,91,62
gauge14=B737_800!compass, 370, 960 ,50,50
gauge15=B737_800!clock, 424,896,105,105
gauge16=737-400!Transponder, 589,4,190,78
gauge17=737-400!Nav 2, 589,87,190,78
gauge18=737-400!Nav 1, 589,169,190,77
gauge19=737-400!Comm 2, 589,249,190,78
gauge20=737-400!Comm 1, 589,330,190,78
gauge21=737-400!Audio, 589,411,190,40
gauge22=737-400!ADF, 589,454,190,80
gauge23=B737_800!eicas, 704,541,260,260
gauge24=B737_800!adf_vor_backup, 757,908,104,105
gauge25=B737_800!attitude_backup, 533,896,104,105
gauge26=B737_800!alti_and_asi_backup, 641,909,103,103
gauge27=B737_800!efis_control_panel, 672,815,143,76
gauge28=CALLOUT_SOUND!dsd_xml_sound3, 0,0,0,0, Sound\CALLOUTB\Sound.ini
gauge29=CALLOUT_SmallJets!CALLOUT2500, 0,0,0,0
gauge30=CALLOUT_SmallJets!CALLOUT1000, 0,0,0,0
gauge31=CALLOUT_SmallJets!CALLOUT500, 0,0,0,0
gauge32=CALLOUT_SmallJets!CALLOUT100, 0,0,0,0
gauge33=CALLOUT_SmallJets!CALLOUT50, 0,0,0,0
gauge34=CALLOUT_SmallJets!CALLOUT40, 0,0,0,0
gauge35=CALLOUT_SmallJets!CALLOUT30, 0,0,0,0
gauge36=CALLOUT_SmallJets!CALLOUT20, 0,0,0,0
gauge37=CALLOUT_SmallJets!CALLOUT10, 0,0,0,0
gauge38=CALLOUT_SmallJets!CALLOUTMIN, 0,0,0,0
gauge39=CALLOUT_SmallJets!CALLOUTAPPMIN, 0,0,0,0
gauge40=FMC!fmc, 783,2,236,370
[VCockpit02]
size_mm=512,512
pixel_size=512,512
texture=$Tds_ACU
background_color=0,0,0
gauge00=Tds788!Tds_AdvInit, 140,80,140,80
gauge01=Tds788!Tdsgearheight, 140,80,140,80
gauge02=Tds788!TdsNosegearsteerling, 140,80,140,80
gauge03=Tds788!Tdsgearretract, 140,80,140,80
gauge04=Tds788!TdsSpoiler, 140,80,140,80
gauge05=Tds788!TdsFlap, 140,80,140,80
gauge06=Tds788!TdsAileron, 140,80,140,80
gauge07=Tds788!TdsRudder_Elev, 140,80,140,80
gauge08=Tds788!TdsEngRev, 140,80,140,80
gauge09=Tds788!TdsWingflex, 140,80,140,80
gauge10=Tds788!TdsAUX, 140,80,140,80
gauge11=Tds788!TdsSEA, 140,80,140,80
gauge12=Tds788!Tdsflasher, 140,80,140,80
[VCockpit03]
size_mm=512,512
pixel_size=512,512
texture=$EXTANIMBASE
background_color=0,0,0
gauge00=EXT_TEXTURE_ANIM!EXTTEST, 0, 0, 512, 512
[Color]
Day=255,255,255
Night=255,255,255
[Default View]
X=0
Y=0
SIZE_X=8192
SIZE_Y=3600
 
expat said:
Knocked this together using freeware bit from various sources:
Click to expand...
My panel VC01 first line was 01 but reset them all back. Didn't have any of the 'callouts' - left them out. There was no VC02 or VC03 so copied and pasted your entries. Still no instrument lighting. Copied and pasted your entire entry - no joy.
 
That should be caused by one of two things: your gauge references are wrong - be sure they refer to the default 737-800 gauges (someone else above was using 777-300 gauges - easy to miss this kind of error) OR you don't have the default 737-800 gauges in either your panel or main gauges folder (the latter is unlikely and therefore the culprit is probably your gauge entries).
 
expat said:
That should be caused by one of two things: your gauge references are wrong - be sure they refer to the default 737-800 gauges (someone else above was using 777-300 gauges - easy to miss this kind of error) OR you don't have the default 737-800 gauges in either your panel or main gauges folder (the latter is unlikely and therefore the culprit is probably your gauge entries).
Click to expand...
Success. It needed the .cab file from the B737_800 panel folder. Without your help, I'd still be looking - thanks.
 
Thanks

:jump: Thanks to all who posted above after my question at the weekend - really appreciated !!!

(Oh I did get the default 738 panel to work thanks to your collective guidance !)
 
Noticed when using the FSX native model (with merged default 737 panel) that I lost some ground equipment animations - the fuel truck won't show at all (the stand that comes out of the ground does still work) and also the tug won't move out of position. Anybody else notice this?
 
OK, have checked and replaced all utility gauge entries and gauges and the problem remains. If I A > B test against the FS9 model however these missing animations reappear. I know Hiroshi designs for FS9 and though not mentioned by many I have never had GE animations work for their POSKY FSX native 737 models, as has been confirmed by one or two others (v5 767 native models have all GE animations working normally on the other hand).
 
expat said:
Noticed when using the FSX native model (with merged default 737 panel) that I lost some ground equipment animations - the fuel truck won't show at all (the stand that comes out of the ground does still work) and also the tug won't move out of position. Anybody else notice this?
Click to expand...
All of mine show correctly, except the Tug does not move out of position when "Wait" is selected. The towbar wheels lower and raise but the Tug itself doesn't move.

I was experiencing various VC display problems with the panel "aliased". I did mod the 738 panel.cfg to incorporate the TDS stuff, and it didn't seem to affect the 738 at all.
Once I put a copy of the 738 panel folder(Panel.X) in the TDS plane, the problems went away. Odd.

[VCockpit01]
....
gaugeXX=EXT_TEXTURE_ANIM!EXTTEST, 0, 0, 512, 512

That gauge corrupted my overhead and caused some of the display problems I was having. That was happening both aliased and normal. I commented it out, and all is working good now...Don
 
All of mine show correctly, except the Tug does not move out of position when "Wait" is selected. The towbar wheels lower and raise but the Tug itself doesn't move.
Click to expand...

Funny, I also have the non moving tug but no fuel tanker appears no matter what I try - unless I switch to the FS9 model.
 
New GenX variant and new JAL repaint available! Thanks Hiroshi and Yosuke...

204410787jal.jpg


384451787jal2.jpg


Here:
- Complete FS9 aircraft and repaint:tds788genx_jal_ja822j.zip @ flightsim
- FSX native model update: fsx_tds788_replacemtn_mdl_if55.zip
 
TDS United 787-8 GenX @ flightsim (search keyword "Tenkuu")

791816777ual.jpg


Scenery freeware SunSkyJet KPHL, repaint by Yosuke Ube, model by Hiroshi Igami.

When installing in FSX, use only these 9 bmp files (+ thumbnail), move all others in a common shared texture folder, and include a texture.cfg file.

779595787.jpg
 
Uploaded today at Flightsim... Qatar repaint by Yosuke Ube (he doesn't do fictionnal liveries, Qatar is one of the launch customers of the 787, I think...).

774704787qtr.jpg


421155777bmp.jpg


Model design by Hiroshi Igami/Yosuke Ube. Flight dynamics design by Maurino M-Bezel Brown, Nick Wilkinson. Master Textures by Yosuke Ube.
 
You must log in or register to reply here.
Back
Top