• Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.

    Post 16 Update

    Post 17 Warning old domain name stealing credentials

  • Special Server Maintenance

    Just when you think you have everything running some what better...

    You get a message from the Hosting company. Short story they need to move us to a new server. I have been working with them to plan a good date for all concerned. Here is what we have come up with as a schedule.

    1. November 4th 17:00 -5UTC shut off the forums and start backup proceedures. During this time there will be no access to the forums or the Resource Section.
    2. November 5th Continue with Backups and download same until complete.
    3. November 6th 7:00 turn over server to hosting company to move system to new server
    4. November 7th - 8th restore backups and upgrade forum software.

    If all goes well we should be back online on November 8th.

    To keep you updated we will post updates on AVSIM forums.

    Thank you for your support.

GAS C3B Stearman FSX FSXSE P3D

Panel cfg. file error

In final prep for commercial release discovered an error in the panel config file. If you have out UPF-7 it would be hidden from you. Here are the edits that will assure that the correct entries are present to properly load the avionics.

FSX FSXSE P3D 1-3 32 Bit
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B


gauge00=GAS_Sound!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98


//--------------------------------------------------------
[Vcockpit02]
//file=gaugemap_C3B_1.bmp
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B_1


gauge00=GASC3B!altimeter, 220,300,100,98
gauge01=fs9gps!gps_295, 6,88,271,177
gauge02=GASC3B!ATC, 325,10,200,61
gauge03=GASC3B!COMM1, 13,9,120,67
gauge04=GASC3B!COMM2, 142,7,118,69

//------------------------------------------------------------------------------

P3D 1-4 64 bit
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B


gauge00=GAS_Sound_64!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98




//--------------------------------------------------------
[Vcockpit02]
//file=gaugemap_C3B_1.bmp
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B_1
gauge00=GASC3B!altimeter, 220,300,100,98
gauge01=fs9gps!gps_295, 6,88,271,177
gauge02=GASC3B!ATC, 325,10,200,61
gauge03=GASC3B!COMM1, 13,9,120,67
gauge04=GASC3B!COMM2, 142,7,118,69
 
Spad54 said:
In final prep for commercial release discovered an error in the panel config file. If you have out UPF-7 it would be hidden from you. Here are the edits that will assure that the correct entries are present to properly load the avionics.

FSX FSXSE P3D 1-3 32 Bit
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B


gauge00=GAS_Sound!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98


//--------------------------------------------------------
[Vcockpit02]
//file=gaugemap_C3B_1.bmp
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B_1


gauge00=GASC3B!altimeter, 220,300,100,98
gauge01=fs9gps!gps_295, 6,88,271,177
gauge02=GASC3B!ATC, 325,10,200,61
gauge03=GASC3B!COMM1, 13,9,120,67
gauge04=GASC3B!COMM2, 142,7,118,69
Click to expand...
Thanks. Trying it now in FSXA. Got an error message. There is an extra space in the word sound for gauge00= for [VCockpit01] that needs to be removed.

I also noticed that the altimeter gauge is repeated for both VCockpits. Intentional?
 
Spad54 said:
In final prep for commercial release discovered an error in the panel config file. If you have out UPF-7 it would be hidden from you. Here are the edits that will assure that the correct entries are present to properly load the avionics.

FSX FSXSE P3D 1-3 32 Bit
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B


gauge00=GAS_Sound!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98


//--------------------------------------------------------
[Vcockpit02]
//file=gaugemap_C3B_1.bmp
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B_1


gauge00=GASC3B!altimeter, 220,300,100,98
gauge01=fs9gps!gps_295, 6,88,271,177
gauge02=GASC3B!ATC, 325,10,200,61
gauge03=GASC3B!COMM1, 13,9,120,67
gauge04=GASC3B!COMM2, 142,7,118,69

//------------------------------------------------------------------------------

P3D 1-4 64 bit
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B


gauge00=GAS_Sound_64!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98




//--------------------------------------------------------
[Vcockpit02]
//file=gaugemap_C3B_1.bmp
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B_1
gauge00=GASC3B!altimeter, 220,300,100,98
gauge01=fs9gps!gps_295, 6,88,271,177
gauge02=GASC3B!ATC, 325,10,200,61
gauge03=GASC3B!COMM1, 13,9,120,67
gauge04=GASC3B!COMM2, 142,7,118,69
Click to expand...

Is this correction applicable for this model only? (see link)
http://www.sim-outhouse.com/sohforums/showthread.php/118009-GAS-WACO-UPF-7-SOH-Sale


Was confused a little as this was posted on the C3B thread. I assume no corrections for the C3B.
 
Last edited:
gray eagle said:
Is this correction applicable for this model only?
http://www.sim-outhouse.com/sohforums/showthread.php/118009-GAS-WACO-UPF-7-SOH-Sale


Was confused a little as this was posted on the C3B thread. I assume no corrections for the C3B.
Click to expand...

This only applies to the C3B. The duplicate altimeter entry should be eliminated the thread has been updated. No worries for the UPF-7. Also make sure that the GASC3B.cab file in the panel folder is copied and placed in the main Gauges folder for all simulators. I used the UPF-7 panel.cfg file for adding the avionics as a last minute addition and in my haste left those references behind. I did not notice the problem because that folder was already in my Gauges folder and the sim found what it needed. When I installed it to a second computer that did not have the UPF-7 installed the error made itself evident. I'm sorry for the bother.
 
WarHorse47 said:
Thanks. Trying it now in FSXA. Got an error message. There is an extra space in the word sound for gauge00= for [VCockpit01] that needs to be removed.

I also noticed that the altimeter gauge is repeated for both VCockpits. Intentional?
Click to expand...

I noticed that too.
 
Spad54 said:
This only applies to the C3B. The duplicate altimeter entry should be eliminated the thread has been updated. No worries for the UPF-7. Also make sure that the GASC3B.cab file in the panel folder is copied and placed in the main Gauges folder for all simulators. I used the UPF-7 panel.cfg file for adding the avionics as a last minute addition and in my haste left those references behind. I did not notice the problem because that folder was already in my Gauges folder and the sim found what it needed. When I installed it to a second computer that did not have the UPF-7 installed the error made itself evident. I'm sorry for the bother.
Click to expand...

My Vcockpit 01 entry looks same as your corrections for (P3D V4.5)

This is my original entry:

[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B

gauge00=GAS_Sound_64!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98


Using winmerge the files are identical (for the P3D applicable entries)

https://winmerge.org/?lang=en
 
Last edited:
Reread notice

gray eagle said:
My Vcockpit 01 entry looks same as your corrections for (P3D V4.5)

This is my original entry:

[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B

gauge00=GAS_Sound_64!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98



Using winmerge the files are identical (for the P3D applicable entries)

https://winmerge.org/?lang=en
Click to expand...

Edit: I reread the bit about:
The duplicate altimeter entry should be eliminated - so noted.
 
Last edited:
Product Update

The product installer has been updated. All you you good folks who purchased the model will receive an email to that extent. Its copied here for your convenience.

Your recently purchased product has been updated to include a transparent glass option, corrected Panel.Cfg entries, and .cab files in the Gauges folder. To access please redownload the product using the link provided for you initial purchase.

Finally the sales period has been extended as additional week.

Thanks all.
 
Spad54 said:
The product installer has been updated. All you you good folks who purchased the model will receive an email to that extent. Its copied here for your convenience.

Your recently purchased product has been updated to include a transparent glass option, corrected Panel.Cfg entries, and .cab files in the Gauges folder. To access please redownload the product using the link provided for you initial purchase.

Finally the sales period has been extended as additional week.

Thanks all.
Click to expand...

Hi,

I received the notice (email) of the update, thanks.

What you mentioned ^ about the transparent glass option has me curious as to what would have to be done to revert to the clear glass like it was on original release?

I like the glass the way it is now; I did not see any read me to clarify this and just wanted to ask.

I enjoy flying this bird and all the textures are very nice. :encouragement:

Thank you for such a nice looking aircraft. :wavey:


Edit: I had the original release with the more transparent glass within the original model files; with this new release, I renamed it to distinguish it from the original release.
That way, I have the original model files for backup - but for those that didn't have the original release, what options are there to revert?
 
page 13 of the users manual

Glass Options
An installer is located within your flight simulator root directory in a folder designated "Golden Age Simulations". This will allow the user to increase the transparency of the windscreen glass rendering it less visible
 
Last edited:
Many thanks for this latest addition! Beautiful as always. I just got an email from GAS talking about an update for the panel as well as a new .cab file. I've already downloaded the windscreen mod. Did that also have the panel and .CAB fix in it, or can I just get that from the previous entry in this thread?

Thanks.
 
I added it to my Hangar also, next Stearman (3th from GAS which I have). Will check in P3Dv5. :encouragement:
 
Im joining to the party :wavey:.

D8qvgaS.jpg


b3NLrXb.jpg


gfy0HaW.jpg


LErpAiN.jpg


6wOT8Kc.jpg


P3Dv5.
 
You must log in or register to reply here.
Back
Top