Spad54
SOH-CM-2025
Thank you for that discount and for the patch. It is appreciated.
Richard
That's beautiful!
Thank you for that discount and for the patch. It is appreciated.
Richard
Thanks. Trying it now in FSXA. Got an error message. There is an extra space in the word sound for gauge00= for [VCockpit01] that needs to be removed.In final prep for commercial release discovered an error in the panel config file. If you have out UPF-7 it would be hidden from you. Here are the edits that will assure that the correct entries are present to properly load the avionics.
FSX FSXSE P3D 1-3 32 Bit
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B
gauge00=GAS_Sound!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98
//--------------------------------------------------------
[Vcockpit02]
//file=gaugemap_C3B_1.bmp
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B_1
gauge00=GASC3B!altimeter, 220,300,100,98
gauge01=fs9gps!gps_295, 6,88,271,177
gauge02=GASC3B!ATC, 325,10,200,61
gauge03=GASC3B!COMM1, 13,9,120,67
gauge04=GASC3B!COMM2, 142,7,118,69
In final prep for commercial release discovered an error in the panel config file. If you have out UPF-7 it would be hidden from you. Here are the edits that will assure that the correct entries are present to properly load the avionics.
FSX FSXSE P3D 1-3 32 Bit
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B
gauge00=GAS_Sound!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98
//--------------------------------------------------------
[Vcockpit02]
//file=gaugemap_C3B_1.bmp
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B_1
gauge00=GASC3B!altimeter, 220,300,100,98
gauge01=fs9gps!gps_295, 6,88,271,177
gauge02=GASC3B!ATC, 325,10,200,61
gauge03=GASC3B!COMM1, 13,9,120,67
gauge04=GASC3B!COMM2, 142,7,118,69
//------------------------------------------------------------------------------
P3D 1-4 64 bit
//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B
gauge00=GAS_Sound_64!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98
//--------------------------------------------------------
[Vcockpit02]
//file=gaugemap_C3B_1.bmp
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B_1
gauge00=GASC3B!altimeter, 220,300,100,98
gauge01=fs9gps!gps_295, 6,88,271,177
gauge02=GASC3B!ATC, 325,10,200,61
gauge03=GASC3B!COMM1, 13,9,120,67
gauge04=GASC3B!COMM2, 142,7,118,69
Is this correction applicable for this model only?
http://www.sim-outhouse.com/sohforums/showthread.php/118009-GAS-WACO-UPF-7-SOH-Sale
Was confused a little as this was posted on the C3B thread. I assume no corrections for the C3B.
Thanks. Trying it now in FSXA. Got an error message. There is an extra space in the word sound for gauge00= for [VCockpit01] that needs to be removed.
I also noticed that the altimeter gauge is repeated for both VCockpits. Intentional?
This only applies to the C3B. The duplicate altimeter entry should be eliminated the thread has been updated. No worries for the UPF-7. Also make sure that the GASC3B.cab file in the panel folder is copied and placed in the main Gauges folder for all simulators. I used the UPF-7 panel.cfg file for adding the avionics as a last minute addition and in my haste left those references behind. I did not notice the problem because that folder was already in my Gauges folder and the sim found what it needed. When I installed it to a second computer that did not have the UPF-7 installed the error made itself evident. I'm sorry for the bother.
My Vcockpit 01 entry looks same as your corrections for (P3D V4.5)
This is my original entry:
[Vcockpit01]
Background_color=0,0,0
size_mm=512,512
visible=0
pixel_size=1024,1024
texture=$panel_C3B
gauge00=GAS_Sound_64!FBGS_XMLSound, 0,0,1,1,SimObjects\\Airplanes\\GAS_Stearman_C3B\\sound\\Stearman#19
gauge01=GASC3B!altimeter, 220,300,100,98
Using winmerge the files are identical (for the P3D applicable entries)
https://winmerge.org/?lang=en
The product installer has been updated. All you you good folks who purchased the model will receive an email to that extent. Its copied here for your convenience.
Your recently purchased product has been updated to include a transparent glass option, corrected Panel.Cfg entries, and .cab files in the Gauges folder. To access please redownload the product using the link provided for you initial purchase.
Finally the sales period has been extended as additional week.
Thanks all.