-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
-
IMPORTANT DOWNLOADING INFORMATION - ALL MEMBERS PLEASE READ
Please see this thread for updates. Update Thread
SOH ADMINISTRATION
Schiphol 1940
- Thread starter Cees Donker
- Start date
Hey Michael, is this one better?
Atb
Cees
Atb
Cees
michaelvader
Members +
Hi Cees
Guuuut Very fine indeed.
Would also like to make some videos. I tried but the outcome has been a bit dubious.
Can not dance on all mariages, isn't it?
I can not loose the feeling that you are doieng for us a mega scenery.
Best regards
Michael
Guuuut Very fine indeed.
Would also like to make some videos. I tried but the outcome has been a bit dubious.
Can not dance on all mariages, isn't it?
I can not loose the feeling that you are doieng for us a mega scenery.
Best regards
Michael
There is no S.IV for FS2004. I converted just the outward model for this video. I'll try to compile one when I have some more time. Real life gets in the way the coming days.
Atb
Cees
Atb
Cees
I think I have that one too Huub. I appreciate it anyway. Very kind of you.
Atb
Cees
Atb
Cees
michaelvader
Members +
Hi ,
just did a flight from Köjn Butzweilerhof (basic scenery done for me by Bernard) to Schiphol with my personal He 111C.
just used atc and the german moving map done by Jorge.
Very pleasant flight and good reception at Schiphol
Thanks a lot
Best Regards
Michael
just did a flight from Köjn Butzweilerhof (basic scenery done for me by Bernard) to Schiphol with my personal He 111C.
just used atc and the german moving map done by Jorge.
Very pleasant flight and good reception at Schiphol
Thanks a lot
Best Regards
Michael
Attachments
Golden Rocket
Members +
Michael, on which Shiphol did you landed?
Bernard
Bernard
michaelvader
Members +
Salut Bernard,
Cees m' a envoyé une copie de son Schiphol 1940
Je ne sais pas s' il compte la publier ou s' il travaille encore dessus
Kenavo
Michael
Cees m' a envoyé une copie de son Schiphol 1940
Je ne sais pas s' il compte la publier ou s' il travaille encore dessus
Kenavo
Michael
I'm searching for a way to add a light to this one. I use FSDS 3.5 and I use ModelConverter. It must generate an extensive light.
Cees
Cees
To finish Schiphol to my liking I’ll have to take two more steps, and these two steps are not within my reach.
I wanted to make a wind-T like the one used on Schiphol, and animate it. This is alas beyond my knowledge or abilities.
Secondly I wanted to add a homing beacon and a gauge to direct to the beacon. That gauge should generate the following sounds:
-On the line: a continuous tone;
-To the North West of the line three short tones repeated;
-To the South East of the line three longer tones the final tone a bit longer than the other two tones repeated.
If anyone is capable and willing to help, I’m all ears.
Cees
I wanted to make a wind-T like the one used on Schiphol, and animate it. This is alas beyond my knowledge or abilities.
Secondly I wanted to add a homing beacon and a gauge to direct to the beacon. That gauge should generate the following sounds:
-On the line: a continuous tone;
-To the North West of the line three short tones repeated;
-To the South East of the line three longer tones the final tone a bit longer than the other two tones repeated.
If anyone is capable and willing to help, I’m all ears.
Cees
michaelvader
Members +
Hallo Cees,
as you know I knows nothing about scenery designe.
But I rember that there exists a "Windsock" that showed the wind direction.
Also Jorge Rechanij employed for my Rostock-Marienehe scenery a smoke effekt in which
The wind direction was shown also.
Perhaps you can use these effects to convert on a winddirection T on the ground.
If you want I can try to find these two items.
Best regards
Michael
PS Perhaps you can take contact directly with Jorge
as you know I knows nothing about scenery designe.
But I rember that there exists a "Windsock" that showed the wind direction.
Also Jorge Rechanij employed for my Rostock-Marienehe scenery a smoke effekt in which
The wind direction was shown also.
Perhaps you can use these effects to convert on a winddirection T on the ground.
If you want I can try to find these two items.
Best regards
Michael
PS Perhaps you can take contact directly with Jorge
Hi Cees,
Have you seen this? https://flyawaysimulation.com/downloads/files/1275/fs2004-radio-range-system/
It uses Morse for "A" and "N" which was the standard for aural systems. Those sound files can probably be substituted. A continuous tone indicated on the beam.
Kevin
Have you seen this? https://flyawaysimulation.com/downloads/files/1275/fs2004-radio-range-system/
It uses Morse for "A" and "N" which was the standard for aural systems. Those sound files can probably be substituted. A continuous tone indicated on the beam.
Kevin
Motormouse
SOH-CM-2025
Hi Cees,
Sidney Schwartz has a wind T in his small airfield objects ez scenery library if that helps at all.
Ttfn
Pete
Sidney Schwartz has a wind T in his small airfield objects ez scenery library if that helps at all.
Ttfn
Pete
Yeah, that's the one in the CalClassics library.
Cees
Cees
Jorge
Members +
Sorry for being away for so long, but family and a few other things have taken priority for most of the year.
Please feel free to use the smoke xml I use to make the smoke if you would like. Just make a txt and insert the code, then drag-and-drop over "bglcomp.exe" and it should create a "bgl" file.
Conversely, if you want to edit the airport in ADE, you can also add the code through there by adding the "effect" through the "right-click" menu. I don't usually do it this way since I edit the xml "post-export" anyway, but it works fine if you add it that way too.
Here's the code for the smoke:
Just replace the lat/lon with your values of the place you want.
This one uses the white smoke effect and operates from 0500 local until 1700 local, which is usually good enough for daytime use. To have this work with the "right-click" option to add effects in ADE, just make sure you add the effect name and parameters in the window in the appropriate locations. Just the "stuff" between the quotes without the quotes, if I remember correctly.
Hope this helped!
Jorge
Miami, FL
Please feel free to use the smoke xml I use to make the smoke if you would like. Just make a txt and insert the code, then drag-and-drop over "bglcomp.exe" and it should create a "bgl" file.
Conversely, if you want to edit the airport in ADE, you can also add the code through there by adding the "effect" through the "right-click" menu. I don't usually do it this way since I edit the xml "post-export" anyway, but it works fine if you add it that way too.
Here's the code for the smoke:
XML:
<?xml version="1.0" encoding="ISO-8859-1"?>
<FSData
version="9.0"
xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'
xsi:noNamespaceSchemaLocation="bglcomp.xsd" >
<!-- GENERIC AIRPORT BASE TYPE "A" - OBJECTS -->
<!-- Smoke Pot For Runway Choice -->
<SceneryObject
lat="0"
lon="0"
alt="0"
altitudeIsAgl="TRUE"
pitch="0"
bank="0"
heading="0"
imageComplexity="NORMAL">
<BiasXYZ
biasX="0"
biasY="0"
biasZ="0"/>
<Effect
effectName="fx_smokestack_w"
effectParams="HOD=05,17;"/>
</SceneryObject>
</FSData>Just replace the lat/lon with your values of the place you want.
This one uses the white smoke effect and operates from 0500 local until 1700 local, which is usually good enough for daytime use. To have this work with the "right-click" option to add effects in ADE, just make sure you add the effect name and parameters in the window in the appropriate locations. Just the "stuff" between the quotes without the quotes, if I remember correctly.
Hope this helped!
Jorge
Miami, FL