-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
The Fravin C150 L upgraded to FSX & P3D
- Thread starter lagaffe
- Start date
-
- Tags
- acceleration fsx-sp2 p3d
ThinkingManNeil
Charter Member
Genuinely enjoyed the FS2004 version of this little bird; so nicely detailed and an excellent flyer so I win't hesitate in the least to download her.
I remember rumours flying around the boards when the FS9 version came out that there were plans for a "Texas Taildragger" version, an iteration of the 150/152 species that is by far my personal favourite. Hopefully that may come, too.
My very real thanks to the parties involved in this for their hard work and thoughtfulness. It's folks like these who making flight simming great...
N.
I remember rumours flying around the boards when the FS9 version came out that there were plans for a "Texas Taildragger" version, an iteration of the 150/152 species that is by far my personal favourite. Hopefully that may come, too.
My very real thanks to the parties involved in this for their hard work and thoughtfulness. It's folks like these who making flight simming great...
N.
lagaffe
SOH-CM-2026
Hi,
It's not necessary to be registred on French-VFR to download an aircraft or an other model; if you do, it will be very nice of you.
Each download is protected with a username/password which are NOT your username member.
All necessary data are detailed in the few lines joined to the download area: you have just to read theses lines. So don't use "Google Translation" on my site, username and perhaps password will be also translated ... so your problems come from there.
To avoid this problem, I have create my homesite with two langages: French and English and I translate systematically all my download pages in English.
Download howto:
1) On the banner page of French-VFR, click on the English flag (at left top of the page) to switch the language site and then go to the Download area and read the instructions: username and password are colored in red.
2) If you have used wrongs username/password and if your explorer have memorized theses settings, try to use another program like Firefox or reset your security parameters (memorized accounts/password).
@ThinkingmanNeil
I am curious and I have made some research on "Texas Taildragger" ... it's a very nice aircraft but this one is a french Cessna maded by Reims Aviation.
Perhaps in the next version, I will make a "Texas Taildragger" ...
Best regards !
It's not necessary to be registred on French-VFR to download an aircraft or an other model; if you do, it will be very nice of you.
Each download is protected with a username/password which are NOT your username member.
All necessary data are detailed in the few lines joined to the download area: you have just to read theses lines. So don't use "Google Translation" on my site, username and perhaps password will be also translated ... so your problems come from there.
To avoid this problem, I have create my homesite with two langages: French and English and I translate systematically all my download pages in English.
Download howto:
1) On the banner page of French-VFR, click on the English flag (at left top of the page) to switch the language site and then go to the Download area and read the instructions: username and password are colored in red.
2) If you have used wrongs username/password and if your explorer have memorized theses settings, try to use another program like Firefox or reset your security parameters (memorized accounts/password).
@ThinkingmanNeil
I am curious and I have made some research on "Texas Taildragger" ... it's a very nice aircraft but this one is a french Cessna maded by Reims Aviation.
Perhaps in the next version, I will make a "Texas Taildragger" ...
Best regards !
racartron
Charter Member 2016
What a great gift for all us old timers
this was my favorite bird in the fs9 days. The good news is all the old liveries port over nicely. All I did was to delete the old prop bmp and add the fsx texture.cfg into each old livery.
I also added my shockwave light setup as one can never have too many lights
Here it is for anyone who likes lots of lights
[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 4, 1.90, 0.00, 1.45, fx_shockwave_vclight,
light.1 = 1, -16.2, 0.00, 3.47, fx_shockwave_beacon ,
light.2 = 4, 1.20, 0.00, 1.00, fx_shockwave_vclight,
light.3 = 3, 0.58, -16.50, 1.80, fx_shockwave_navred_nl,
light.4 = 3, 0.58, 16.60, 1.80, fx_shockwave_navgre_nl,
light.5 = 2, 0.28, -16.50, 1.80, fx_shockwave_strobe_nl,
light.6 = 2, 0.28, 16.60, 1.80, fx_shockwave_strobe_nl_3,
light.7 = 6, 8.10, 0.00, -1.20, fx_shockwave_landing_light_small,
light.8 = 5, 8.10, 0.00, -1.20, fx_shockwave_landing_light_narrow
now, back to the skies
this was my favorite bird in the fs9 days. The good news is all the old liveries port over nicely. All I did was to delete the old prop bmp and add the fsx texture.cfg into each old livery.I also added my shockwave light setup as one can never have too many lights
Here it is for anyone who likes lots of lights[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing
light.0 = 4, 1.90, 0.00, 1.45, fx_shockwave_vclight,
light.1 = 1, -16.2, 0.00, 3.47, fx_shockwave_beacon ,
light.2 = 4, 1.20, 0.00, 1.00, fx_shockwave_vclight,
light.3 = 3, 0.58, -16.50, 1.80, fx_shockwave_navred_nl,
light.4 = 3, 0.58, 16.60, 1.80, fx_shockwave_navgre_nl,
light.5 = 2, 0.28, -16.50, 1.80, fx_shockwave_strobe_nl,
light.6 = 2, 0.28, 16.60, 1.80, fx_shockwave_strobe_nl_3,
light.7 = 6, 8.10, 0.00, -1.20, fx_shockwave_landing_light_small,
light.8 = 5, 8.10, 0.00, -1.20, fx_shockwave_landing_light_narrow
now, back to the skies
TuFun
Riveter
big-mike
SOH-CM-2022
Roger
Senior Administrator
big-mike
SOH-CM-2022
Paul Anderson
Charter Member
Great job on conversion!
Just an observation, in Greenhopper's paints the title for FCROW is blank which prevents it and any subsequent paints in aircraft.cfg from showing in aircraft selection menu.
Suggest changing it from:
title=
to:
title=Cessna_150 F-CROW
Just an observation, in Greenhopper's paints the title for FCROW is blank which prevents it and any subsequent paints in aircraft.cfg from showing in aircraft selection menu.
Suggest changing it from:
title=
to:
title=Cessna_150 F-CROW
doublecool
Charter Member
Wonderful gift for the start of 2014
Thank you to all envolved
Thank you to all envolved
Sorry, guys - I read the instructions, translated the site to English, and typed the id and password displayed in red when asked but then still get rejected because of an id/password violation. Any more ideas?
Stan V
Try 'micro' instead of 'mike' for user name. Google translation screws that up.
After I do the site's language translation, that is the word that shows in red and that is what I typed - it doesn't work for me.
What browser are you using? I ended up getting it downloaded from Firefox.