• Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.

    Post 16 Update

    Post 17 Warning old domain name stealing credentials

  • Special Server Maintenance

    Just when you think you have everything running some what better...

    You get a message from the Hosting company. Short story they need to move us to a new server. I have been working with them to plan a good date for all concerned. Here is what we have come up with as a schedule.

    1. November 4th 17:00 -5UTC shut off the forums and start backup proceedures. During this time there will be no access to the forums or the Resource Section.
    2. November 5th Continue with Backups and download same until complete.
    3. November 6th 7:00 turn over server to hosting company to move system to new server
    4. November 7th - 8th restore backups and upgrade forum software.

    If all goes well we should be back online on November 8th.

    To keep you updated we will post updates on AVSIM forums.

    Thank you for your support.

A Lockheed "Rounder"

I would throw in my support for a Tanker variant but i wouldnt mind seeing any of the options above. Looking good Uncle Milton!
 
Just to be clear, I like all the options.

I will do the fully equipped option.
Variants will be limited by options that require major body changes and separate texture mappings.
Those are tough to manage and frustrating to painters and me, as any subsequent changes require changing and remapping multiple models. It's just not productive or mentally healthy for me. :)

A great example of that is the Grumman Tracker, Trader, Tracer project where I built 7 variants. Almost all of the major body panels (fuse, wings, tails, and interiors) are different and required unique mapping for the variants. When changes or enhancements had to be made, I ended up having to make those changes across most of the variants and remapping them. The process is very susceptible to errors and oversights.

Okay, last night I worked on the belly windows with some success, after two restarts. :)

Today I shall get started on the turret and observation or navigator window.
 
I like options #4 & 5. The fully equipped version with and without stores loaded.

Since we already have the awsome Howard 500 and the Lodestar in the wings the civil Harpoon seems a little superfluous, just my two cents.
 
The turret and observation dome are the next challenges.

Here I have borrowed the AT-11 Sperry designed turret as a starting point.
It looks about the right size comparing to pictures but the 3-view has it way small. ( I think the 3-view is wrong).

So, I wrote to request dimensions from Taigh Ramey so we can get it close to the real world Martin 230CE-13 model used in the Harpoon.

I know the shape is a bit off but I am awaiting size dimensions before reshaping.


 
I droooool every time I see new screenshots of this classic Lockheed. :applause:

I'd be happy with the clean version because mine will end up hauling freight. :jump:

Looking forward to the day this gets released.

Pete.
 
Thanks Pete, et al.

Okay, while waiting for specs on the turret, I got the bomb bay doors cut in and animated. These are interesting to see in operation.
 
pfflyers said:
I like options #4 & 5. The fully equipped version with and without stores loaded.

Since we already have the awsome Howard 500 and the Lodestar in the wings the civil Harpoon seems a little superfluous, just my two cents.
Click to expand...

My two pence as well.
 
I received proper dimensions and drawings of the turret so now in process of converting it from a Sperry AT-11 training design to a Martin 250CE-13 combat use unit; still very much a WIP.
 
^ what he said plus "MUHAHAHAHAAA!"

can't wait for this one Milton, i'll be sure to pull in front of traffic so the gunners can get some practice... :icon_lol:
 
Great work there Milton. If you want someone to see if they can break it in FSX I will put my hand up to try to do it for you.
 
Thanks Milton ...... Hope the Ventura is on the list as well. While I like both the Harpoon and Lodestar which the RAAF operated they also operated the Ventura. And of course being an Aussie I like aircraft that can carry the VH-*** or the A**-*** serials.
 
You and your team never cease to amaze me, Milton... I have never seen anyone make such amazing, spectacular models.. in such a short amount of time. You're going to force me to build another hangar, once the Harpoon, the XP-47J and the "Grumman Five" are released.

BB686:USA-flag:
 
AussieMan said:
Thanks Milton ...... Hope the Ventura is on the list as well. While I like both the Harpoon and Lodestar which the RAAF operated they also operated the Ventura. And of course being an Aussie I like aircraft that can carry the VH-*** or the A**-*** serials.
Click to expand...

Thanks AM; I understand your thinking. As I mentioned before, the Ventura is a very different aircraft body than the Lodestar and Harpoon and would pretty much require a redo of the fuselage, windscreen area, wings, flaps, nacelles, and gear; essentially a whole new model so no promises on that one or any of the earlier relatives. My intent is to try to get out a Harpoon and Lodestar, maybe a civvie 18. We'll see where it all goes once I get the XP47J out the door (after the Grumman "Five" and Avia 51 and 156).

Blackbird686 said:
You and your team never cease to amaze me, Milton... I have never seen anyone make such amazing, spectacular models.. in such a short amount of time. You're going to force me to build another hangar, once the Harpoon, the XP-47J and the "Grumman Five" are released.

BB686:USA-flag:
Click to expand...

Thanks BB. If the FS9 forum participants were not actively involved, all I could do is a model. It really is everyone of the other contributors who make it come to fruition. The thing we really lack here is a panel gauge designer and this will one day bring our work to a halt. For example, the Avia 51 and 156 are about ready for beta, but we have no panels or gauges. I am trying to cobble together a basic panel for each (bought FS Panel Studio after hand placing 50 gauges on 3 panels) but this is not my forté.
 
Milton, I had FS Panel Studio which I use for modifying panels for aircraft I have in FSX. Unfortunately I have never tried to create a gauge from scratch as when I am modifying a panel I use gauges from my 'Gauges' folder which is a mix of defauly, freeware and payware gauges.

VC gauges are a different story as a lot of the time they cannot be changed.

Maybe if I had the appropriate panel bitmaps and a map of the location of the gauges then maybe I could knock up a 2-D panel for you. May even get daring and try to code them into a VC as well.
 
AussieMan said:
Milton, I had FS Panel Studio which I use for modifying panels for aircraft I have in FSX. Unfortunately I have never tried to create a gauge from scratch as when I am modifying a panel I use gauges from my 'Gauges' folder which is a mix of defauly, freeware and payware gauges.

VC gauges are a different story as a lot of the time they cannot be changed.

Maybe if I had the appropriate panel bitmaps and a map of the location of the gauges then maybe I could knock up a 2-D panel for you. May even get daring and try to code them into a VC as well.
Click to expand...

Ha! You sound like me stumbling along in the wilderness too. :)

I am planning to ask Scott Thomas to do these Harpoon and Lodestar panels but he is busy on the Grumman series right now.

I have put the Harpoon project "On Hold" for now until I get the panels done for the Avia 156 and Avia 51.
I have too many things poppin' right now and it is a good time to get cozy with FS Panel Studio I received yesterday.
I have a basic panel in place now for the 156, both 2D and VC panels plus views so I am getting the hang of it. :)

I appreciate your offer but may as well wait on the Lockheed project to see how things evolve.

Thanks :)
 
You must log in or register to reply here.
Back
Top