Boeing B-50 V1 Released

Perhaps further development will render additional interior cockpit views, i.e. engineers station, radio station, such as was visible in the B29.
I appreciate and wish to thank Team 50's efforts for the B-50. :encouragement:
 
Boeing B-50 Superfortress ( KB-50J ) U.S. Air Force

Never heard of this variant.
Their speed enhanced by the addition of two 5,200-pound-thrust (235-kilogram-thrust) jet engines, so at 400 mph (644 km/h) they could refuel jet aircraft.

49-0372_Boeing_B-50_Superfortress_%28_KB-50J_%29_U.S._Air_Force_%288739053348%29.jpg
 
JensOle said:
Is it not as simple as adding the gauges sections which control the extra features from the stock panel to the entries in the B-29 panel.cfg (+copying over the involved gauges)?
Click to expand...

If one CAREFULLY follows Frank's instructions for the VC merge and edakridge's instructions TO THE LETTER and adds the monitor panel to the B-29 panel config (Windows) all is well. I have the B-29 panel with B-50 yoke button, tanks where appropriate, and a functional monitor panel (shift 5). It's a beautiful thing! And I'm just an old fart who's definitely not what you'd call "tech savvy". YMMV...

The OMS
 
Missing Textures and Scenery Issues ....

LE151 said:
Howdy Folks,
Has anyone reported not seeing the actual exterior of the plane show up when first loading the aircraft in FSX??......will probably get "rapped in the mouth" for this but I didn't read the install directions, and just put the B50 file in my sim-objects/airplanes folder.....sorry......was limited on my time. I noticed that if I switched to windowed mode the model shows up then I can go back to full-screen mode and the exterior of the model stays. However when I switch into the VC mode I can't see the wing or engine (they are invisible)....I can see the prop spin, but nothing else....when looking out of the window from the pilots position. It is like this when I first start the sim. The outside of the B-50 is invisible, but I can switch to VC mode and from the VC I can see the port side wing and engines....only when I switch to windowed mode does it seem to somewhat correct the issue. It's really weird from the outside view the shadow of the plane is on the ground but the actual plane is invisible. I am running FSX/Acceleraton....(I guess one of the minimum requirements)....however this model looks absolutely astounding.....was testing it a bit today.....love to have this for my hangar!! :wavey::wavey:
Click to expand...

WarHorse47 said:
Hi, Odie. Yes, as you figured out. Basically the entire model is corrupted when I load the B-50, from the VC to the external view to the surrounding scenery.

I've been monitoring all the suggestions here and did some more testing, but it all comes down to the one gauge I mentioned. When the gauge is removed from the panel.cfg, I can still fly and enjoy it but just without all whistles and bells. And the scenery is back to normal.

Guess this is why a new release starts with Version 1. :biggrin-new:
Click to expand...


Hi guys,

I've been closely following this thread. I have not yet downloaded this beautiful aircraft, as I'm currently first trying to sort out these same issues with the ' C-97 V3 Model ' which I downloaded just last week. I have not done any modifications to this C-97 V3 Model.

Yesterday I flew around Orbx's KPSP, and noticed, when viewed from the VC, one of the roads leading out of town was lined with 'black' star-like outlines where the trees would normally be - as if these textures were not loading properly. Switched to another aircraft, flew same route and all is well again. I never thought this would be related to the C-97 aircraft or any of it's gauges until I read this account here by '@WarHorse47' and '@Odie'. I guess I'm not the only one, and the B-50 is not the only model which is doing this. Hopefully it's a simple 'fix'.

Furthermore, regarding the missing aircraft textures (ie. wings) when viewed from the captain's seat in the VC, as reported by '@LE151' - I have the exact same issues with the C-97 V3 Model and have set up a post here re this :
http://www.sim-outhouse.com/sohforums/showthread.php/108351-Boeing-C-97-V3-Update-Query

I am running FSX Deluxe Ed. with SP 1 and 2.
 
MZee1960 said:
Hi guys,

I've been closely following this thread. I have not yet downloaded this beautiful aircraft, as I'm currently first trying to sort out these same issues with the ' C-97 V3 Model ' which I downloaded just last week. I have not done any modifications to this C-97 V3 Model.

Yesterday I flew around Orbx's KPSP, and noticed, when viewed from the VC, one of the roads leading out of town was lined with 'black' star-like outlines where the trees would normally be - as if these textures were not loading properly. Switched to another aircraft, flew same route and all is well again. I never thought this would be related to the C-97 aircraft or any of it's gauges until I read this account here by '@WarHorse47' and '@Odie'. I guess I'm not the only one, and the B-50 is not the only model which is doing this. Hopefully it's a simple 'fix'.

Furthermore, regarding the missing aircraft textures (ie. wings) when viewed from the captain's seat in the VC, as reported by '@LE151' - I have the exact same issues with the C-97 V3 Model and have set up a post here re this :
http://www.sim-outhouse.com/sohforums/showthread.php/108351-Boeing-C-97-V3-Update-Query

I am running FSX Deluxe Ed. with SP 1 and 2.
Click to expand...

Hi MZee......I remembered that when I first jumped into FSX after installing the B-50 I remembered that I had "aircraft casts shadow on ground" checked under aircraft settings. I could see the B-50's shadow on the ground but the aircraft was invisible(except for a few certain parts). When I flew her today I unchecked "aircraft casts shadow on ground" and POOF.....everything was there.....I'm guessing there in lies the issue. I just wanted to thank "MJ" for the spectacular aircraft.........she really is a lovely lady, and she fly's superbly!! :ernaehrung004::applause:

attachment.php
 

Attachments

  • -2017-nov-28-007.jpg
    -2017-nov-28-007.jpg
    52.1 KB · Views: 29
LE151 said:
Hi MZee......I remembered that when I first jumped into FSX after installing the B-50 I remembered that I had "aircraft casts shadow on ground" checked under aircraft settings. I could see the B-50's shadow on the ground but the aircraft was invisible(except for a few certain parts). When I flew her today I unchecked "aircraft casts shadow on ground" and POOF.....everything was there.....I'm guessing there in lies the issue. I just wanted to thank "MJ" for the spectacular aircraft.........she really is a lovely lady, and she fly's superbly!! :ernaehrung004::applause:

attachment.php
Click to expand...

Hi @LE151,

I don't have the B-50 downloaded yet, as I'm still trying to work out the same issues with the C-97 V3.
I unchecked the 'aircraft casts shadows on ground' option already - this did not help and wing still invisible from VC view.
Perhaps it's different in the B-50 model version ??
 
First, I gotta say that I can't do anything related to problems encountered when hitching up the Virtavia cockpit. Other than saying revert to the original that came in the zip or possibly wait until Virtavia gets in on the act.

As for reports on issues with the default config I'd naturally like to get to the bottom of it and offer a cure if possible. For this it is always helpful if we can replicate the issue. To help us along, you could show the Monitor window and specify frame rate, scenery and location, dxt9 or dxt10, and possibly other suspicious detail. Monitor has a 'Test' subpanel where we can monitor (ha!) individual variables. Even if it should turn out that nothing can be done about a particular problem, we can at least warn prospective users about "known issues".

P.S. As for the C-97 VC not displaying any wing views I was able to replicate that - it doesn't have any. The B-50 has them, though.

P.P.S. Aircraft that only work if "cast shadow on ground" is disabled are unacceptable to me. I would tell users to get rid of it if that were the case.
 
Absolutely STUNNING in P3Dv4!!

Thank you Manfred once again for your generosity. You continue to rank at the top of freeware developers. Just wish your L-749 could be converted to work in P3Dv4!
 
gray eagle said:
Never heard of this variant.
Their speed enhanced by the addition of two 5,200-pound-thrust (235-kilogram-thrust) jet engines, so at 400 mph (644 km/h) they could refuel jet aircraft.

49-0372_Boeing_B-50_Superfortress_%28_KB-50J_%29_U.S._Air_Force_%288739053348%29.jpg
Click to expand...

They were common performers at air displays in the UK. They would tow a B-66 at the centre line drogue, with an F-100 and an F-101 on the wing station drogues. They were notorious for flying over the wrong airfield.
 
mjahn said:
First, I gotta say that I can't do anything related to problems encountered when hitching up the Virtavia cockpit. Other than saying revert to the original that came in the zip or possibly wait until Virtavia gets in on the act.

As for reports on issues with the default config I'd naturally like to get to the bottom of it and offer a cure if possible. For this it is always helpful if we can replicate the issue. To help us along, you could show the Monitor window and specify frame rate, scenery and location, dxt9 or dxt10, and possibly other suspicious detail. Monitor has a 'Test' subpanel where we can monitor (ha!) individual variables. Even if it should turn out that nothing can be done about a particular problem, we can at least warn prospective users about "known issues".

P.S. As for the C-97 VC not displaying any wing views I was able to replicate that - it doesn't have any. The B-50 has them, though.

P.P.S. Aircraft that only work if "cast shadow on ground" is disabled are unacceptable to me. I would tell users to get rid of it if that were the case.
Click to expand...


Hi Manfred,

I have moved the C-97 queries to this thread :

http://www.sim-outhouse.com/sohforums/showthread.php/108351-Boeing-C-97-V3-Update-Query

Thank-you.
MZ
 
MZee1960 said:
Hi @LE151,

I don't have the B-50 downloaded yet, as I'm still trying to work out the same issues with the C-97 V3.
I unchecked the 'aircraft casts shadows on ground' option already - this did not help and wing still invisible from VC view.
Perhaps it's different in the B-50 model version ??
Click to expand...

Well that is strange........I'm not sure if mine was a fluke or not........I will have to test it when I get a chance to fly again and hopefully try to reproduce the problem and take some "screenies" of them. I believe that I'm flying DX9 due to my DX10 preview being unchecked. Perhaps we'll get to the bottom of it. Chat with you all soon........:wavey:
 
mjahn said:
P.P.S. Aircraft that only work if "cast shadow on ground" is disabled are unacceptable to me. I would tell users to get rid of it if that were the case.
Click to expand...

Yes Sir,
I understand your dedication. I will test it again when I get a chance. Check and uncheck the box to see what affect it has on the model if any. I'm flying one of the oldest versions of FSX/Accel (Boxed, no....not "Gold" either). Even if my version causes issues with "aircraft shadows" I'm OK with it (different strokes). I had a great flight the other day with all views working and all exteriors/interiors showing. Thanks for the model...I had been waiting/hoping that someone would do a B-50 for FSX. I asked Virtavia about doing one shortly after they put out the B-29.......they basically told me to "piss-off"....so thanks again "MJ"...she is a beauty for the virtual skies. :ernaehrung004::ernaehrung004:
 
LE151 said:
Well that is strange........I'm not sure if mine was a fluke or not........I will have to test it when I get a chance to fly again and hopefully try to reproduce the problem and take some "screenies" of them. I believe that I'm flying DX9 due to my DX10 preview being unchecked. Perhaps we'll get to the bottom of it. Chat with you all soon........:wavey:
Click to expand...

Hi,

In post #89 above, Manfred has already confirmed that the 'missing wing' texture issue when viewed from the VC is only related to the C-97 model. The B-50 model has them visible.
 
Seahawk72s said:
Would it be possible to see any pics or drawings of the B-50 cockpit..?
Click to expand...

I don't think there are any on the net. Geoff Hays's book on the B-50 ist still available, and has several pictures of the cockpit. It is basically identical to the B-29 pit of which you can find many pics. Why, are you offering to model one?

@Gray Eagle, don't touch the Shift-5 "Keys" panel, it's a systems gauge. I'll move it out of the way the next time around.

@All, here is a preview of a turret-less WB-50D. The RB, EB, and TB versions were basically similar. I am putting some finishing touches on it and then it will be out as well.

zbpskUKb.jpg
 
You must log in or register to reply here.
Back
Top