-
Please see the most recent updates in the "Where did the .com name go?" thread. Posts number 16 and 17.
Cwdt P-51D
- Thread starter warbirdlover
- Start date
warbirdlover
Members +
I had to split up folder 1 into 1a and 1b because it was still too large. I just uploaded them. Put the contents of folder 1b inside folder 1a and then put 1a into the fs9 aircraft folder along with folders 3 and 4. If you combine them into one folder it might not work. Good luck and any problems put them in this thread.
warbirdlover
Members +
Cwdt p51d (2nd of 4)
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS IS THE CWDT P51D DESIGNED BY A.C. WAI. IT HAS ALL THE BELLS AND WHISTLES SO HERE IS DOWNLOAD 2 OF 4. DOWNLOAD AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED. PUT THESE SEPERATELY INTO FS2004. HAVE FUN
warbirdlover
To check it out, rate it or add comments, visit CWDT P51D (2ND OF 4)
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS IS THE CWDT P51D DESIGNED BY A.C. WAI. IT HAS ALL THE BELLS AND WHISTLES SO HERE IS DOWNLOAD 2 OF 4. DOWNLOAD AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED. PUT THESE SEPERATELY INTO FS2004. HAVE FUN
warbirdlover
To check it out, rate it or add comments, visit CWDT P51D (2ND OF 4)
The comments you make there will appear in the posts below.
warbirdlover
Members +
Cwdt p51d (3rd of 4)
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS IS THE CWDT P51D DESIGNED BY A.C. WAI. IT HAS ALL THE BELLS AND WHISTLES SO HERE IS DOWNLOAD 3 OF 4. DOWNLOAD AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED. PUT THESE SEPERATELY INTO FS2004. HAVE FUN
warbirdlover
To check it out, rate it or add comments, visit CWDT P51D (3RD OF 4)
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS IS THE CWDT P51D DESIGNED BY A.C. WAI. IT HAS ALL THE BELLS AND WHISTLES SO HERE IS DOWNLOAD 3 OF 4. DOWNLOAD AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED. PUT THESE SEPERATELY INTO FS2004. HAVE FUN
warbirdlover
To check it out, rate it or add comments, visit CWDT P51D (3RD OF 4)
The comments you make there will appear in the posts below.
warbirdlover
Members +
Cwdt p51d (4th of 4)
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS IS THE CWDT P51D DESIGNED BY A.C. WAI. IT HAS ALL THE BELLS AND WHISTLES SO HERE IS DOWNLOAD 4 OF 4. DOWNLOAD AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED. PUT THESE SEPERATELY INTO FS2004. HAVE FUN
warbirdlover
To check it out, rate it or add comments, visit CWDT P51D (4TH OF 4)
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS IS THE CWDT P51D DESIGNED BY A.C. WAI. IT HAS ALL THE BELLS AND WHISTLES SO HERE IS DOWNLOAD 4 OF 4. DOWNLOAD AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED. PUT THESE SEPERATELY INTO FS2004. HAVE FUN
warbirdlover
To check it out, rate it or add comments, visit CWDT P51D (4TH OF 4)
The comments you make there will appear in the posts below.
warbirdlover
Members +
Cwdt p51d (folder 1a of 4)
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS IS THE FS2004 CWDT P51D PACKAGE. THIS IS FOLDER 1A OF 4) THIS GOES INTO THE FS9 AIRCRAFT FOLDER AFTER DOWNLOAD 1B OF 4 IS PUT INSIDE THIS FOLDER. DOWLOADS 2, 3 AND 4 ALL GO INTO THE FS9 AIRCRAFT FOLDER. DO NOT COMBINE. DOWNLOAD AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY PROBLEMS. HAVE FUN. I HAD TO DO IT THIS WAY BECAUSE SIM-OUTHOUSE WOULDN'T TAKE THE HUGE UPLOADS WITH ONE ZIPPED FOLDER. HAVE FUN.
To check it out, rate it or add comments, visit CWDT P51D (FOLDER 1A OF 4)
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS IS THE FS2004 CWDT P51D PACKAGE. THIS IS FOLDER 1A OF 4) THIS GOES INTO THE FS9 AIRCRAFT FOLDER AFTER DOWNLOAD 1B OF 4 IS PUT INSIDE THIS FOLDER. DOWLOADS 2, 3 AND 4 ALL GO INTO THE FS9 AIRCRAFT FOLDER. DO NOT COMBINE. DOWNLOAD AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY PROBLEMS. HAVE FUN. I HAD TO DO IT THIS WAY BECAUSE SIM-OUTHOUSE WOULDN'T TAKE THE HUGE UPLOADS WITH ONE ZIPPED FOLDER. HAVE FUN.
To check it out, rate it or add comments, visit CWDT P51D (FOLDER 1A OF 4)
The comments you make there will appear in the posts below.
warbirdlover
Members +
Cwdt p51d (1b of4)
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS FOLDER CONTENT GOES INSIDE FOLDER 1A AND FOLDER 1A GOES INTO FS9 AIRCRAFT FOLDER. THIS IS A FS2004 AIRCRAFT. DOWNLOAD AT YOUR OWN RISK BECAUSE WE ARE NOT RESPONSIBLE.
To check it out, rate it or add comments, visit CWDT P51D (1B OF4)
The comments you make there will appear in the posts below.
A new entry has been added to Add-Ons Library, category FS 2004 Military - Props
Description: THIS FOLDER CONTENT GOES INSIDE FOLDER 1A AND FOLDER 1A GOES INTO FS9 AIRCRAFT FOLDER. THIS IS A FS2004 AIRCRAFT. DOWNLOAD AT YOUR OWN RISK BECAUSE WE ARE NOT RESPONSIBLE.
To check it out, rate it or add comments, visit CWDT P51D (1B OF4)
The comments you make there will appear in the posts below.
warbirdlover
Members +
There is a very detailed users manual inside one of these folders. UPDATE; download 4 goes into the 1a folder. Sorry. If this download doesn't work please let us know. Going from 1 download to many is scary.
warbirdlover
Members +
HERE IS WHAT IS IN MY FS9 AIRCRAFT FOLDER:
CWDT_P-51d
CWDT_P51DBR
CWDT_P51DFT
IF YOU'RE DARING YOU COULD TRY PUTTING THE CONTENTS OF THE 1B, 2, 3 AND 4 FOLDERS ALL IN FOLDER 1A BUT THAT DIDN'T WORK FOR ME.
CWDT_P-51d
CWDT_P51DBR
CWDT_P51DFT
IF YOU'RE DARING YOU COULD TRY PUTTING THE CONTENTS OF THE 1B, 2, 3 AND 4 FOLDERS ALL IN FOLDER 1A BUT THAT DIDN'T WORK FOR ME.
Maybe I'm a bit confused... So I unzipped 1A into a temp folder then I unzipped 1B into that folder. I get the following folders..
CWDT_P-51d (
CWDT_P-51DBR
CWDT_P-51DFT
new
P51d
P-51D
P-51DREV
P-51DVC
as well as a bunch of sound.zips
Zip2 -CWDT_P51d gives me this folder:
CWDT_P51d - this is the same name as the file in 1A..
BUT has different textures.
Neither of the aircraft.cfg' s match the textures.
There is also various cfg's that dont match up any textures.
I have not even looked at the other 2 zips, I'm just confused
Is there an easier way of installing this plane???
CWDT_P-51d (
CWDT_P-51DBR
CWDT_P-51DFT
new
P51d
P-51D
P-51DREV
P-51DVC
as well as a bunch of sound.zips
Zip2 -CWDT_P51d gives me this folder:
CWDT_P51d - this is the same name as the file in 1A..
BUT has different textures.
Neither of the aircraft.cfg' s match the textures.
There is also various cfg's that dont match up any textures.
I have not even looked at the other 2 zips, I'm just confused
Is there an easier way of installing this plane???
Thanks Gerald for making this model available. The model comes with a lot of different loads and has nice animations. But I agree with Zsobbie, the installation is quite confusing. It seems it is a combination from work folders and finished folders.
Robin, I have looked at the files as well. There is a lot of duplication. For instance inside the CWDT_P-51DBR folder there are 8 textures folders. however only 4 are used. The texture folder texture.1 contains exactly the same textures as the folder texture.crow. The texture folder texture.4 contains the same textures as the folder texture.bets, etc.
In the textures for the models inside the CWDT_P-51d folder don't show up, as in the aircraft configuration file reference is made to texture folders which don't exist. When you change the entries to the textures into texture.tall and texture.lou the problem will be solved.
These problems are quite easy to solve. A problem which I haven't been able to solve is non appearing gauges in the VC.
The gauges in the VC of the models in the folder CWDT_P-51d appear. Although the panel for the other models is aliased to the panel inside the folder from which the gauges appear, they don't show up. Even when I take the complete panel folder from the CWDT_P-51d folder and copy it inside the CWDT_P-51DBR and CWDT_P-51DFT folders the gauges will not appear.
I'm convinced all required files are in the downloads, but as said there many duplicates and some files are in the wrong place.
I wish I had the time to sort this out, as it is a nice model, and I'm convinced the download could be made much smaller than it currently is.
A simple change to the aircraft configuration file inside the CWDT_P-51d colder makes the textures for this plane and Lou IV show up.
The model comes with many interesting load outs and animations.
In some models the gauges in the VC show up and in some they don't.....
And as you can see the model comes with different VC matching the sub-types as well.
Cheers,
Huub
Robin, I have looked at the files as well. There is a lot of duplication. For instance inside the CWDT_P-51DBR folder there are 8 textures folders. however only 4 are used. The texture folder texture.1 contains exactly the same textures as the folder texture.crow. The texture folder texture.4 contains the same textures as the folder texture.bets, etc.
In the textures for the models inside the CWDT_P-51d folder don't show up, as in the aircraft configuration file reference is made to texture folders which don't exist. When you change the entries to the textures into texture.tall and texture.lou the problem will be solved.
These problems are quite easy to solve. A problem which I haven't been able to solve is non appearing gauges in the VC.
The gauges in the VC of the models in the folder CWDT_P-51d appear. Although the panel for the other models is aliased to the panel inside the folder from which the gauges appear, they don't show up. Even when I take the complete panel folder from the CWDT_P-51d folder and copy it inside the CWDT_P-51DBR and CWDT_P-51DFT folders the gauges will not appear.
I'm convinced all required files are in the downloads, but as said there many duplicates and some files are in the wrong place.
I wish I had the time to sort this out, as it is a nice model, and I'm convinced the download could be made much smaller than it currently is.
A simple change to the aircraft configuration file inside the CWDT_P-51d colder makes the textures for this plane and Lou IV show up.
The model comes with many interesting load outs and animations.
In some models the gauges in the VC show up and in some they don't.....
And as you can see the model comes with different VC matching the sub-types as well.
Cheers,
Huub
I did not even have a look at the VC!
I think that, tomorrow, I'll roll up my sleeves and try sort things out. There is a huge amount that can be dumped.
I've done literally 1000's of installs in my time, but this one got me scratching my head. I think that I was probably overthinking thing, with all the work files there.
I'll clear out all the unnecessary stuff & see what I can come up with.
I think that, tomorrow, I'll roll up my sleeves and try sort things out. There is a huge amount that can be dumped.
I've done literally 1000's of installs in my time, but this one got me scratching my head. I think that I was probably overthinking thing, with all the work files there.
I'll clear out all the unnecessary stuff & see what I can come up with.
warbirdlover
Members +
Maybe I'm a bit confused... So I unzipped 1A into a temp folder then I unzipped 1B into that folder. I get the following folders..
CWDT_P-51d (
CWDT_P-51DBR
CWDT_P-51DFT
new
P51d
P-51D
P-51DREV
P-51DVC
as well as a bunch of sound.zips
Zip2 -CWDT_P51d gives me this folder:
CWDT_P51d - this is the same name as the file in 1A..
BUT has different textures.
Neither of the aircraft.cfg' s match the textures.
There is also various cfg's that dont match up any textures.
I have not even looked at the other 2 zips, I'm just confused
Is there an easier way of installing this plane???
1a is the 1st MAIN folder and 1b goes into it. You can also put 4 into 1a. the rest you leave as individual folders in the fs9 aircraft folder. So you'll have 3 folders in the fs9 aircraft folder. They are:
CWDT_P-51d
CWDT_P-51DBR
CWDT_P51DFT
I'm sorry guys but not being able to upload Andrew's 1st of 4 files forced me to break the first one apart. I had to upload smaller folders. I thought I had it worked out but obviously not. I took Andrew's first folder and just cut pasted half of it into a 1b folder. When you put the 1b folder's "guts" into the 1a folder it should have been the same as Andrew sent me. The 4th folder is just the instructions. the second and third folder are not different from Andrew's sent to me and it worked for me. Looking I found the plain "texture" folder (no number at the end) was not in each of the 3 folders so I stuck it in the airplane folders where it was missing. It wouldn't hurt anything. I'm looking at the gauges.
I've been trying to sort the panel/gauge issue, but I'm not getting anywhere.
The P-51D shows the normal panel but no VC
The other two, P-51DBR & P-51FT show the normal panel and the VC.
What confuses me is that those two versions alias the panel from the P-51D, & show the VC, but the main P-51D does not show the VC.
I even moved the panel from the P-51D to the P-51FT & aliased the P-51D to that, still no VC in the P-51D.
The textures are all sorted out, with a little bit of correcting of the aircraft.cfg.
The P-51D shows the normal panel but no VC
The other two, P-51DBR & P-51FT show the normal panel and the VC.
What confuses me is that those two versions alias the panel from the P-51D, & show the VC, but the main P-51D does not show the VC.
I even moved the panel from the P-51D to the P-51FT & aliased the P-51D to that, still no VC in the P-51D.
The textures are all sorted out, with a little bit of correcting of the aircraft.cfg.
It is a complete mystery for me, as I have it the other way round. The 2D panel shows up complete with gauges in all models (folders). However the models inside CWDT_P-51DBR and CWDT_P-51DFT only how the gauges inside the 2D panel.
I have already moved the gauges from the panel folder to the main gauge folder in FS9 root folder, but no result.
Cheers,
Huub
I have already moved the gauges from the panel folder to the main gauge folder in FS9 root folder, but no result.
Cheers,
Huub
warbirdlover
Members +
I've asked Andrew if he has the original CWDT "installer" and the password. If he does I'll upload that and hopefully it will resolve all these issues. Wish me luck.
warbirdlover
Members +
FIX?
Andrew sent me this file and asked to try it out. Itr worked for me. Just put the contents into the first P51 folder and let us know. Thanks.
It's in the fs2004 military prop area and has my smiling face as the picture.
Andrew sent me this file and asked to try it out. Itr worked for me. Just put the contents into the first P51 folder and let us know. Thanks.
It's in the fs2004 military prop area and has my smiling face as the picture.