Iris C-27J inbound immenently....

Barnes · Sep 11, 2011

The repaint kit is well done but i have found a glitch. What ever colour you paint in the area i have highlighted below - appears on other panels underneath the fusalarge. this is no problem for an all over colour secheme but for camo its a real pain.

Barnes · Sep 11, 2011

Hi

Im struggling to find photos to do much more research on this one so please feel free to download from here and give any advice or feedback!!
http://www.mediafire.com/file/gc6e5ealm2e59jv/IRIS Spartan repaint US Camo.zip

baernhard · Sep 11, 2011

Please help me.
How can I open the doors.
The manual says: section 3, loadmaster and so on ...
How can I get this loadmaster. Where is the clipboard or the guy who has it.
Thanks.

View attachment 48074

View attachment 48075

View attachment 48076

Greetings
Bernhard

Barnes · Sep 11, 2011

Have you left clicked the leaver in front of the throttles?

Then either right or left click the selections on the clip board - but wait a few seconds :salute:

baernhard · Sep 11, 2011

That was exactly the right note.
Thanks a lot.

View attachment 48078

Greetings Bernhard

Barnes · Sep 11, 2011

Is that your repaint?!

baernhard · Sep 11, 2011

Yes, I've tried.
In a day or two it will be at Flightsim.

Barnes · Sep 11, 2011

Wow - great work :salute:

baernhard · Sep 11, 2011

The exhaust smoke from CaptainSim C-130, can be used very well.

This is the entry for the Aircraft CFG:

<!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w:HyphenationZone>21</w:HyphenationZone> <w

unctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w

oNotPromoteQF/> <w:LidThemeOther>DE</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w

ontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w

ontVertAlignCellWithSp/> <w

ontBreakConstrainedForcedTables/> <w

ontVertAlignInTxbx/> <w:Word11KerningPairs/> <w:CachedColBalance/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="--"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]--> [SMOKESYSTEM]

SMOKE.0 = -7.80, -15.00, 0.90, CS130_SMOKE
SMOKE.1 = -7.80, 15.00, 0.90, CS130_SMOKE

View attachment 48079

View attachment 48080

Barnes · Sep 11, 2011

Wow thanks for sharing :wavey:

Having a go at the Morocan scheme

Kavehpd · Sep 11, 2011

Dain Arns said:
-Yes

-1024x1024

-No (if you mean an "all in one"), you would have to create one yourself.
There are 5 .psd files all together.
Separate files for each side of the fuselage (Left/right), for each set of wing surfaces (left/right), and the tail.

Thanks for the great reply.

I meant the non-chopped up version of the entire fuselage+tail to avoid any alignment issues with tricky repaints. It's a trial and error game without it. But not really that important.

One last question, since the PSDs are 1024x1024, I'm assuming textures are also the same resolution and not 2048*. Correct?

Barnes · Sep 11, 2011

Kavehpd said:
Thanks for the great reply.

I meant the non-chopped up version of the entire fuselage+tail to avoid any alignment issues with tricky repaints. It's a trial and error game without it. But not really that important.

One last question, since the PSDs are 1024x1024, I'm assuming textures are also the same resolution and not 2048*. Correct?

Hi

Wings are separate but easy.

Fuselarge is separated once on both sides but there is a very good wireframe to help line up things. Tail fin is also separate.

Tako_Kichi · Sep 11, 2011

Kavehpd said:
I meant the non-chopped up version of the entire fuselage+tail to avoid any alignment issues with tricky repaints. It's a trial and error game without it. But not really that important.

For multiple fuselage texture sheets I have sometimes assembled them into a single PSD file (i.e. 5120 x 1024 for 5 sheets). You can then paint as required and after all painting is done you can split the big sheet down into smaller ones again. That takes all the alignment issues out of the equation. You do end up with a huge PSD file with dozens of layers so layer management (using sub-folders) is critical.

Dain Arns · Sep 11, 2011

Kavehpd said:
Thanks for the great reply.

I meant the non-chopped up version of the entire fuselage+tail to avoid any alignment issues with tricky repaints. It's a trial and error game without it. But not really that important.

One last question, since the PSDs are 1024x1024, I'm assuming textures are also the same resolution and not 2048*. Correct?

My understanding is the textures are 2048.
As long as they take to load in FSX on my old system, I would say they are. :icon_lol:

Kavehpd · Sep 11, 2011

Dain Arns said:
My understanding is the textures are 2048.
As long as they take to load in FSX on my old system, I would say they are.

Thanks.

Barnes · Sep 11, 2011

got a few more lines to sort and should soon be ready.

CG_1976 · Sep 11, 2011

Does anyone plan on doing a USCG and or RNZAF one please??

warchild · Sep 11, 2011

The textures as issued are in 1024. so is the paint kit. However its not so difficult to resize the psd's to 2048 before you start painting them.

Matt Wynn · Sep 11, 2011

Pam if you resize up you blur the layers, things aren't as crisp as a fully native 2048*2048 paint kit, which i have :icon_lol:

but is being used for the texture pack, finalised my scheme list...

Lithuania
Bulgaria
Mexico
India
Slovakia
Morocco
Romanian
Italian
Peru
Germany
UN
Netherlands
Finland
Canadian
Canadian SAR
Spanish
IRIS Demo
France
Sweden
USCG
Czech
Buffalo Airways
Hellenic SAR
Hellenic Coastguard
Hellenic Air Force
US SOC (Spec Ops)

all the ones i'll be doing for a Texture pack in Full HD :salute:

Warrant · Sep 11, 2011

Smoothie said:
Pam if you resize up you blur the layers, things aren't as crisp as a fully native 2048*2048 paint kit, which i have but is being used for the texture pack, finalised my scheme list...

Lithuania
Bulgaria
Mexico
India
Slovakia
Morocco
Romanian
Italian
Peru
Germany
UN
Netherlands
Finland
Canadian
Canadian SAR
Spanish
IRIS Demo
France
Sweden
USCG
Czech
Buffalo Airways
Hellenic SAR
Hellenic Coastguard
Hellenic Air Force
US SOC (Spec Ops)

all the ones i'll be doing for a Texture pack in Full HD :salute:

Nice!

:ernae:

(what scematics for the Dutch one do you have in progress? I uploaded the one below yesterday. It resembles a 336 sqn medium tactical airlifter, in line with the recently introduced C-130H aircraft to this unit.)

View attachment 48101

Iris C-27J inbound immenently....

Charter Member 2012

Charter Member 2012

Charter Member 2014

Charter Member 2012

Charter Member 2014

Charter Member 2012

Charter Member 2014

Charter Member 2012

Charter Member 2014

Charter Member 2012

Charter Member

Charter Member 2012

Administrator

Senior Member

Charter Member

Charter Member 2012

Ret. US Coastie/RCAF

Charter Member

New member

Videre Vincere Est