Lockheed Jetstar II
- Thread starter Jim Goldman
- Start date
WarHorse47
SOH-CM-2024
Any chance of posting an update beta in the download section?
I haven't been able to track all the tweaks and mods since the original beta and decided to start all over again.
Beautiful work so far.
I haven't been able to track all the tweaks and mods since the original beta and decided to start all over again.
Beautiful work so far.
thunder100
Charter Member 2010
Thats an antenna
- - - Updated - - -
Any chance of posting an update beta in the download section?
I haven't been able to track all the tweaks and mods since the original beta and decided to start all over again.
Beautiful work so far.
Within the next days
thunder100
Charter Member 2010
Hi
I uploaded- wrong picture though - the FSX updated Beta 2 version
Pls read the must read
PLS TEST IN FAX I cannot
The ones which never flew will still not fly
FSX BETA 2 MODEL !!!!-->P3D PBR to follow a little later
If flys and is tested in
P3D V4.5- extensively
P3D V5.1 - extensively
THIS IS BETA 2Model
You have 3 models
Brian Gadden fixed the lights on the plane-->the one in model cfg
An exterior w/o the fixed lights
An exterior w/o pilot and co-pilot
You have 2 panels
2048 resolution as standard MEMORY Heavy
1024 normal resulution
You have 2 more repaints
poor N313JS by myself- Pls make a correct and better one
full metal one off Mike17 paintkits , you can find in SOH Downloads
You have the Shockwave light aircraft.cfg
You dont like them you use the blanked out ones //light.8
Comments Welcome
Roland
I uploaded- wrong picture though - the FSX updated Beta 2 version
Pls read the must read
PLS TEST IN FAX I cannot
The ones which never flew will still not fly
FSX BETA 2 MODEL !!!!-->P3D PBR to follow a little later
If flys and is tested in
P3D V4.5- extensively
P3D V5.1 - extensively
THIS IS BETA 2Model
You have 3 models
Brian Gadden fixed the lights on the plane-->the one in model cfg
An exterior w/o the fixed lights
An exterior w/o pilot and co-pilot
You have 2 panels
2048 resolution as standard MEMORY Heavy
1024 normal resulution
You have 2 more repaints
poor N313JS by myself- Pls make a correct and better one
full metal one off Mike17 paintkits , you can find in SOH Downloads
You have the Shockwave light aircraft.cfg
You dont like them you use the blanked out ones //light.8
Comments Welcome
Roland
Seahawk72s
SOH-CM-2023
In FSX(A) I did a new, clean install of beta 2.
-Aircraft will not load and FSX CTD ( 3 times).
-I removed Fraser 2D panel entry and still have CTD.
-I switched over to pre-beta panel ( which has Fraser 2D removed) and so far aircraft load and look OK.
thunder100
Charter Member 2010
Does plane show in preview ?
If yes go to panel.cfg
-->rename and use the panel vc 1024,1024.cfg as panel.cfg
CTD
in (1024) panel remove that part
[Vcockpit02]
Background_color=0,0,0
size_mm=1024,1024
window_size_ratio=1.000
visible=0
window_size= 1.000, 1.000
pixel_size=2048,2048
texture=$vcjspnl
window_pos= 0.000, 0.000
//gauge00=dsd_fs9_fuel_dump!fuel_dump, 6,0,1,1
//gauge01=dsd_xml_sound3!dsd_xml_sound3,4,0,1,1,.\Ai rcraft\FM_Cockpit_Sounds\L1329_sound.ini
gauge02=L1329!Systems_Process_L1329,0,0,1,1
gauge03=L1329!Collins_IFS_Computer,2,0,1,1
gauge04=L1329!Autopilot_Junction_Box,8,0,1,1
Still CTD
Remove that part
//--------------------------------------------------------
[Window05]
file=Jetstar_1329_Main3.bmp
size_mm=1229
window_size_ratio=1.000
position=7
visible=0
ident=10001
gauge00=L1329!Checklist_Icon, 923,0,200,18
gauge01=L1329!Caption_Thrust_Rev_Ext, 795,320,97,8
gauge02=L1329!Caption_Thrust_Rev_Unlocked, 794,389,98,8
gauge03=L1329!Caption_Stall_Warning, 1094,317,68,8
gauge04=L1329!Caption_Off, 1098,329,58,8
gauge05=L1329!Caption_On, 1100,378,54,7
gauge06=L1329!Caption_Sys, 1089,392,78,7
gauge07=L1329!Reverse_Lights, 801,329,80,55
gauge08=L1329!Alt_Alert, 921,325,131,61
gauge09=L1329!Stall1_Switch, 1070,326,27,64
gauge10=L1329!Stall1_Light, 1100,347,26,21
gauge11=L1329!Stall2_Light, 1129,347,26,21
gauge12=L1329!Stall2_Switch, 1158,326,27,64
gauge13=L1329!Marker_Outer, 409,439,25,25
gauge14=L1329!Marker_Middle, 409, 468 ,25,25
gauge15=L1329!Marker_Inner, 409,498,25,25
gauge16=L1329!Master_Warning, 460,493,86,14
gauge17=L1329!GPWS, 463,464,47,18
gauge18=L1329!GPWS_Fail_Lamp, 459,432,23,23
gauge19=L1329!GS_Inhib_Lamp, 486,432,23,23
gauge20=L1329!GPWS_Master, 519,424,24,59
gauge21=L1329!GS_Isolate, 546,424,24,59
gauge22=L1329!FD_Annunciator, 287,535,137,25
gauge23=L1329!Free_Air_Temp, 66,629,76,76
gauge24=L1329!Airspeed_Machmeter, 155,575,109,109
gauge25=L1329!Collins_FDI, 277,561,163,164
gauge26=L1329!Altimeter_Mk59, 449,524,109,109
gauge27=L1329!Turn_and_Bank_Pioneer, 58,723,84,85
gauge28=L1329!RMI_C10, 151,703,125,122
gauge29=L1329!Collins_CI, 284,726,146,151
gauge30=L1329!IVSI, 449,653,112,111
gauge31=L1329!Distance_Dual, 448,779,112,113
gauge32=L1329!WS_Power_Switch, 31,838,24,59
gauge33=L1329!WS_Heat_switch, 62,853,16,36
gauge34=L1329!Hyd_Main_Switch, 98,839,24,59
gauge35=L1329!Hyd_Aux_Switch, 135,839,24,59
gauge36=L1329!No1_AA_Light, 167,837,19,18
gauge37=L1329!No2_AA_Light, 194,837,19,18
gauge38=L1329!No3_AA_Light, 221,837,19,18
gauge39=L1329!No4_AA_Light, 248,837,19,18
gauge40=L1329!Eng_AA_Switch_Outer, 184,866,24,59
gauge41=L1329!Eng_AA_Switch_Inner, 226,866,24,59
gauge42=L1329!Parking_Brake, 252,883,47,49
gauge43=L1329!Icons, 305,883,128,47
gauge44=L1329!Altimeter_No2, 576,780,109,107
gauge45=L1329!Call_Sign, 494,900,70,20
gauge46=L1329!Rad_Alt, 570,401,129,127
gauge47=L1329!Flt_Dir_Fail_Lamp, 377,501,22,20
gauge48=L1329!Flaps_Indicator, 709,446,77,75
gauge49=L1329!TrafficRadar, 572,532,221,220
gauge50=L1329!Firex_Switch, 741,398,25,46
gauge51=L1329!No1_Fire_Handle, 777,402,95,22
gauge52=L1329!No2_Fire_Handle, 877,402,95,22
gauge53=L1329!No3_Fire_Handle, 975,402,95,22
gauge54=L1329!No4_Fire_Handle, 1074,402,95,22
gauge55=L1329!No1_EPR, 805,428,75,75
gauge56=L1329!No2_EPR, 891,428,75,75
gauge57=L1329!No3_EPR, 978,428,75,75
gauge58=L1329!No4_EPR, 1064,428,75,75
gauge59=L1329!No1_RPM, 804,515,75,76
gauge60=L1329!No2_RPM, 890,515,75,76
gauge61=L1329!No3_RPM, 977,515,75,76
gauge62=L1329!No4_RPM, 1063,515,75,76
gauge63=L1329!No1_EGT, 804,605,75,75
gauge64=L1329!No2_EGT, 890,604,75,75
gauge65=L1329!No3_EGT, 977,604,75,75
gauge66=L1329!No4_EGT, 1063,604,75,75
gauge67=L1329!No1_Fuel_Flow, 805,692,74,75
gauge68=L1329!No2_Fuel_Flow, 891,692,74,75
gauge69=L1329!No3_Fuel_Flow, 978,692,74,75
gauge70=L1329!No4_Fuel_Flow, 1064,692,74,75
gauge71=L1329!CWP, 1144,424,85,246
gauge72=L1329!Ann_Test, 1171,671,15,16
gauge73=L1329!Hyd_Pressure_Gauge, 1151,692,75,76
gauge74=L1329!Fuel_Panel, 724,795,489,162
gauge75=L1329!Emer_Gear_Handle, 0,656,67,77
Give it a try
Best regards
Roland
I renamed the panel vc 1024,1024.cfg to panel.cfg and see no CTD's. Thanks for the help, Roland.
Brian
WarHorse47
SOH-CM-2024
No joy here.
I'm using the 1024, 1024 cfg as directed.
Removed [Window05] as directed.
[Vcockpit02] is different and not active
/--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0
size_mm=1024,1024
window_size_ratio=1.000
visible=0
window_size= 1.000, 1.000
pixel_size=2048,2048
texture=$vcjspnl
window_pos= 0.000, 0.000
//gauge00=dsd_fs9_fuel_dump!fuel_dump, 6,0,1,1
//gauge01=dsd_xml_sound3!dsd_xml_sound3,4,0,1,1,.\Ai rcraft\FM_Cockpit_Sounds\L1329_sound.ini
//gauge02=L1329!Systems_Process_L1329,0,0,1,1
//gauge03=L1329!Collins_IFS_Computer,2,0,1,1
//gauge04=L1329!Autopilot_Junction_Box,8,0,1,1
The aircraft starts to load, then a CTD. I'm running FSXA.
thunder100
Charter Member 2010
Hi
Just for a test you could take out 30 gauges from bottom of VCockpit1
Root cause are the CAB file memory heavy gauges- if the plane shows in preview
And use that attached texture ( delete in your aircraft folder input these and chose the JG Lockheed Jetstar II FSX BETA 2 N876BT plane
That are smaller interior and exterior textures
After that no more ideas
Best regards
Roland
View attachment texture.zip
Just for a test you could take out 30 gauges from bottom of VCockpit1
Root cause are the CAB file memory heavy gauges- if the plane shows in preview
And use that attached texture ( delete in your aircraft folder input these and chose the JG Lockheed Jetstar II FSX BETA 2 N876BT plane
That are smaller interior and exterior textures
After that no more ideas
Best regards
Roland
View attachment texture.zip
Mike71
SOH-CM-2025
Just confirmed -it's an HF antenna
WarHorse47
SOH-CM-2024
Nope.
Copied 1024, 1024 cfg to panel.cfg.
Removed [cockpit05]
Removed 30 gauges from [vcockpit01]
Plane shows in preview, but you can see that its loading the gauges up until the CTD.
My system should be able to handle it.
thunder100
Charter Member 2010
OK
One more
IF IT SHOWS IN PREVIEW
Make your (1025) panel.cfg look like that
[Window Titles]
Window00=Main Panel
[VIEWS]
VIEW_FORWARD_DIR=-1.000, 0.000, 0.000
//--------------------------------------------------------
[Window00]
file=Main_Panel.bmp
size_mm=1280,960
window_size_ratio=1.000
position=7
visible=1
ident=MAIN_PANEL
window_size= 1.000, 1.000
window_pos= 0.000, 0.000
gauge00=LJS!Jet_N1_1, 837,508,68,68
//--------------------------------------------------------
[Vcockpit01]
file=$VCjspnl.bmp
Background_color=0,0,0
size_mm=1024,1024
window_size_ratio=1.000
visible=0
window_size= 1.000, 1.000
pixel_size=4096,4096
texture=$vcjspnl
window_pos= 0.000, 0.000
gauge00=L1329!Stall1_Light, 11,455,17,15
gauge01=L1329!Stall2_Light, 29,455,17,16
gauge02=L1329!Marker_Outer, 1002,518,25,25
gauge03=L1329!Marker_Middle, 994,591,25,25
gauge04=L1329!Marker_Inner, 762,510,25,25
gauge05=L1329!GPWS, 223,287,33,19
gauge06=L1329!FD_Annunciator, 545,645,149,25
gauge07=L1329!Free_Air_Temp, 834,19,37,35
gauge08=L1329!WS_Heat_switch, 62,853,16,36
and leave the all lower gauges in VCsection
What does the FSX crash report say- sometines they state what caused the crash
Best regards
Roland
PS
id previous version ever fly ??
thunder100
Charter Member 2010
WarHorse47
SOH-CM-2024
Nope. Still getting CTD. And yes, the previous version did fly once the issues with the panel were resolved.OK
One more
IF IT SHOWS IN PREVIEW
Make your (1025) panel.cfg look like that
[Window Titles]
Window00=Main Panel
[VIEWS]
VIEW_FORWARD_DIR=-1.000, 0.000, 0.000
//--------------------------------------------------------
[Window00]
file=Main_Panel.bmp
size_mm=1280,960
window_size_ratio=1.000
position=7
visible=1
ident=MAIN_PANEL
window_size= 1.000, 1.000
window_pos= 0.000, 0.000
gauge00=LJS!Jet_N1_1, 837,508,68,68
//--------------------------------------------------------
[Vcockpit01]
file=$VCjspnl.bmp
Background_color=0,0,0
size_mm=1024,1024
window_size_ratio=1.000
visible=0
window_size= 1.000, 1.000
pixel_size=4096,4096
texture=$vcjspnl
window_pos= 0.000, 0.000
gauge00=L1329!Stall1_Light, 11,455,17,15
gauge01=L1329!Stall2_Light, 29,455,17,16
gauge02=L1329!Marker_Outer, 1002,518,25,25
gauge03=L1329!Marker_Middle, 994,591,25,25
gauge04=L1329!Marker_Inner, 762,510,25,25
gauge05=L1329!GPWS, 223,287,33,19
gauge06=L1329!FD_Annunciator, 545,645,149,25
gauge07=L1329!Free_Air_Temp, 834,19,37,35
gauge08=L1329!WS_Heat_switch, 62,853,16,36
and leave the all lower gauges in VCsection
What does the FSX crash report say- sometines they state what caused the crash
Best regards
Roland
PS
thunder100
Charter Member 2010
Then use old panel cfg- should work then if so pls post first VCockpitsection here
Seahawk72s
SOH-CM-2023
Panel change
So I tried different combinations and found:
-Removing 2D window 5 (Fraser 2D panel)
-And commenting out VC#2 gauges the aircraft loads.
Where is this gauge..?
So I tried different combinations and found:
-Removing 2D window 5 (Fraser 2D panel)
-And commenting out VC#2 gauges the aircraft loads.
Where is this gauge..?
Seahawk72s
SOH-CM-2023
Model problems
After changing panel.cfg and aircraft loaded, there are problems with the interior mdl file. (JG_JSII int FSX2)
Gaps in model. and no overhead
Then switched to most current exterior mdl file: (FSD_JSII FSX Beta 2)
Interesting.
After changing panel.cfg and aircraft loaded, there are problems with the interior mdl file. (JG_JSII int FSX2)
Gaps in model. and no overheadThen switched to most current exterior mdl file: (FSD_JSII FSX Beta 2)
Interesting.