Lockheed Jetstar II

[expat]

 

[expat]

 

[thunder100]

Hi

What does the yello pointer,needle show in ITT gauge ?

Thanks for help

Roland

 

[expat]

 

[gray eagle]

I don't have the cockpit lights - I use to but gone now also no lights in cabin light ^

In P3D V4.5 this is my lights secton:

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo
//------- -Fwd/Aft---L/R----Vert---Effect Type
light.0=3, -8.82, -27.19, -2.55, fx_navredm ,
light.1=3, -8.82, 27.19, -2.55, fx_navgrem ,
light.2=3, -27.10, 0.00, -0.10, fx_navwhi ,
light.3=2, -8.88, -27.19, -2.55, fx_strobe ,
light.4=2, -8.88, 27.19, -2.55, fx_strobe ,
light.5=2, -27.30, 0.00, -0.10, fx_strobe ,
light.6=1, -24.15, 0.00, 12.85, fx_beacon ,
light.7=1, 0.06, 0.00, -4.95, fx_beacon,
light.8=8, 21.677873, -0.6053, -5.0, fx_landing ,
light.9=8, 8.76873, -12.6, -3.7, fx_JS2_landing,
light.10=4, 1.80, 0.00, 2.08, fx_vclighth,
light.11=4, 6.00, 0.00, 2.08, fx_vclighth,
light.12=4, 16.80, 0.00, 1.80, fx_vclighth,
light.13=8, 8.76873, -12.6, -4.2, fx_landing,
light.14=8, 8.76873, 12.6, -4.2, fx_JS2_landing,
light.15=8, 8.76873, 12.6, -3.7, fx_JS2_landing,


Edit I have cockpit lights again but no passenger cabin lights like expat has - would like recipe pls.

This is my lights section now:

[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi, 7=recognition, 8=wing, 9=logo
//------- -Fwd/Aft---L/R----Vert---Effect Type
light.0=3, -8.82, -27.19, -2.55, fx_navredm ,
light.1=3, -8.82, 27.19, -2.55, fx_navgrem ,
light.2=3, -27.10, 0.00, -0.10, fx_navwhi ,
light.3=2, -8.88, -27.19, -2.55, fx_strobe ,
light.4=2, -8.88, 27.19, -2.55, fx_strobe ,
light.5=2, -27.30, 0.00, -0.10, fx_strobe ,
light.6=1, -24.15, 0.00, 12.85, fx_beacon ,
light.7=1, 0.06, 0.00, -4.95, fx_beacon,
light.8=8, 21.677873, -0.6053, -5.0, fx_landing ,
light.9=8, 8.76873, -12.6, -3.7, fx_JS2_landing,
ight.10=4, 12.80, 0.00, 1.208, fx_vclighth,
light.11=4, 8.00, 0.00, 1.208, fx_vclighth,
light.12=4, 16.80, 0.00, 1.80, fx_vclighth,
light.13=8, 8.76873, -12.6, -4.2, fx_landing,
light.14=8, 8.76873, 12.6, -4.2, fx_JS2_landing,
light.15=8, 8.76873, 12.6, -3.7, fx_JS2_landing,
light.16=4, 21.71, -1.34, 0.593, fx_vclighth,
light.17=4, 21.71, 1.34, 0.593, fx_vclighth,
light.18=4, 21.71, 0, 0.593, fx_vclight

 

[gray eagle]

OK, I thought of something and added this to my panel.cfg. Eureka! I have electrics and the starter system works (with GPU) and engine gauges in the Fraser M 2D panel are working normally now.





//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$vpanel7


//gauge00=dsd_fs9_fuel_dump!fuel_dump, 6,0,1,1
//gauge01=dsd_xml_sound3!dsd_xml_sound3,4,0,1,1,.\Aircraft\FM_Cockpit_Sounds\L1329_sound.ini
gauge02=L1329!Systems_Process_L1329,0,0,1,1
gauge03=L1329!Collins_IFS_Computer,2,0,1,1
gauge04=L1329!Autopilot_Junction_Box,8,0,1,1

Does this pertain only to fsx?

 

[expat]

I am in P3Dv4.5.

 

[gray eagle]

I am in P3Dv4.5.

So am I.


Kinda dark back there pilgrim.

 

[gray eagle]

Perhaps you have this effect thanks to spotlight?

https://www.flightsimlabs.com/index.php/spotlights-2/

 

[expat]

Yes, GE, you won't get those effect just with your aircraft.cfg.

Download the program then use my pre-set config attached.

 

[thunder100]

FSX and P3D use mostly same lights. so one can copy and paste

 

[expat]

 

[Mike71]

Jetstar II Performance Data

I have summarized basic performance info to get started. This is from charts I have obtained, data for 1329-25 with 731-3 engines. Also some comments from a couple of flight test reports. Sorry about some of the list indentations --

//empty_weight = 24750.000
//Max ramp 44,750 lbs
//Max take-off 44,500 lbs
//Max Zero Fuel Weight 27,500 lbs
//Max landing 36,000 lbs
//Max fuel capacity 18985 lbs


Normally, load internal fuel full prior to filling any external fuel. Exceptions allowed if cg is maintained within limits
Takeoff must be made using internal fuel only, selected with fuel valves
Airborne, burn external fuel prior to internal fuel
max fuel imbalance is 1500 lbs between external tanks (internal tanks balanced), 1150 lbs for internal wing tanks (external tanks balanced)


Maximum operating altitude: FL430
Max operating / overspeed 350 KIAS / 0.82 IMN
marginal maneuverability above FL400 (coffin corner between max cruise power and stall)




Takeoff:
Flaps 20 deg (SL ISA conditions)
Speed brake MUST be retracted prior to takeoff or landing to avoid possible ground contact / damage


GW Vr V2
44.5K 137 157
40K 130 146
35K 124 136
30K 115 131


Landing
Speed brake MUST be retracted prior to takeoff or landing to avoid possible ground contact / damage
Vapp Flaps 20 deg Vref Flaps 40 deg (SL ISA conditions
Vref = 1.3 Vso at Flaps 40


GW Vapp Vref
36K 140 131
35K 139 130
32.5K 134 125
30K 129 121


CRUISE: Normal 0.76 IMN at mid to high 30s; 3000 pph fuel flow.
1st hour 4000 lbs including departure and climb
Max initial cruise altitudes at initial TOW (ISA conditions):
44.5K FL370
41K FL380
34K FL430

Climb speeds:
Band KIAS
SL to 10,000 250
10000 - FL200 270
FL200 - FL300 260
FL325 - higher 0.7 IMN



JetStar II at its 44,500-pound maximum takeoff weight required 6,500 feet of runway at sea level on a standard day. Landing at the 36,000-pound maximum landing weight required 4,170 feet (50 ft obstacle, anti skid operative, no reversers; ft foot crossing heights, no wind, no gradient)

 

[gray eagle]

Got the cabin door lluminated thanks to FSLSpotlights.

 

[expat]

 

[thunder100]

dear All

Painkit, by Mike17 ( huge work ) is in final stage
Actually 2 a white one and a metal one

Soon

THANKS MIKE

 

[Mike71]

Unfortunately, The NASA and USAF birds are early Jetstars with PW engines. Externally you can tell from the "not underslung" wing tanks

The USAF bought several Jetstar I's, but no Jetstar IIs

 

[expat]

Painkit, by Mike17 ( huge work ) is in final stage

That's super good news!

 

[expat]

Looking back at Gordon's work on the model and wondering if there may be an option to have 4K textures and PBR in the exterior model?

Also, interesting to see what he did with the VC in the attached video (see e.g., at about 14:30).

https://www.youtube.com/watch?v=NJuWU561K3k

 

[thunder100]

Looking back at Gordon's work on the model and wondering if there may be an option to have 4K textures and PBR in the exterior model?

Also, interesting to see what he did with the VC in the attached video (see e.g., at about 14:30).

https://www.youtube.com/watch?v=NJuWU561K3k

We tried to reach Gordon
But did not work - no answer

All you see here is off an FS9 model-->P3DV4.4-->FSX
As soon as I find Gmax help we try above things as well, but not yet

So wait and see

Roland