MILVIZ/Blackbird News !!!

[huub vink]

I like this one as well.......

Cheers,
Huub

 

[WarHorse47]

Another fine mess...

Anyone download and install the UH-1 Huey in FSXA?

Like a couple other downloads, the installer only provides for P3Dv3 and v4, so selecting P3Dv3 and pointing to the FSXA directory everything seems to install just fine. Only issue is that there are no doors or crew. If I use the MVAMS configuration setup I cannot toggle any of these, the hoist or weapons to show.

I attempted to uninstall are revisit for another day but couldn't remove the option for the Huey in MVAMS so I guess I'm stuck with a partial install for the moment.

Funny thing is that the website and install screen indicate its compatible for FSX. Even the User Guide PDF shows an install for FSX.

Any suggestions??

 

[menef]

Anyone download and install the UH-1 Huey in FSXA?

Like a couple other downloads, the installer only provides for P3Dv3 and v4, so selecting P3Dv3 and pointing to the FSXA directory everything seems to install just fine. Only issue is that there are no doors or crew. If I use the MVAMS configuration setup I cannot toggle any of these, the hoist or weapons to show.

I attempted to uninstall are revisit for another day but couldn't remove the option for the Huey in MVAMS so I guess I'm stuck with a partial install for the moment.

Funny thing is that the website and install screen indicate its compatible for FSX. Even the User Guide PDF shows an install for FSX.

Any suggestions??

Same problem for me...

 

[erican2]

Anyone download and install the UH-1 Huey in FSXA?

Like a couple other downloads, the installer only provides for P3Dv3 and v4, so selecting P3Dv3 and pointing to the FSXA directory everything seems to install just fine. Only issue is that there are no doors or crew. If I use the MVAMS configuration setup I cannot toggle any of these, the hoist or weapons to show.

I attempted to uninstall are revisit for another day but couldn't remove the option for the Huey in MVAMS so I guess I'm stuck with a partial install for the moment.

Funny thing is that the website and install screen indicate its compatible for FSX. Even the User Guide PDF shows an install for FSX.

Any suggestions??

You will find the MVAMS files here so that you can remove them manually.

It's a hidden folder by default C:\Users\PC Name\AppData\Local\MVAMS. I had the same problem with the Huey.

Hope this helps.

 

[WarHorse47]

You will find the MVAMS files here so that you can remove them manually.

It's a hidden folder by default C:\Users\PC Name\AppData\Local\MVAMS. I had the same problem with the Huey.

Hope this helps.

Yes, Thanks. I found those in my search for answers but elected to leave things as they were and hope for a solution.

I'm just wondering if they elected not to post the installer for FSX?

 

[MZee1960]

I bought this when it first came out for FSX. If I remember correctly, someone familiar with the 310 said it tended to pull one way on initial power input, then change direction later in the take off roll. Milviz attempted to replicate this by doing two things, using torque_on_roll in the [flight_tuning] section and also by producing asymmetrical thrust by locating engine thrust in two different lateral distances from center in the [generalenginedata] section. IMO this didn't work well with the poor runway friction in FSX. I'm pulling all of this from my ancient memory so take it FWIW but those issues are easily fixed in the aircraft.cfg file.

Thank-you, @monk1 for the help. My initial install was done manually by pointing installer to folder on desktop. I don't think the installer could figure out what sim I had as it gave no options for FSX/P3D during install. I found an empty effects folder also. This would explain why I was missing a few things. After deleting everything I opted to use their installer as now I knew where things will end up in the sim folders. All installed OK now. After following your advice re the [flight_tuning] section, now the C310 flies like the Duke B60 with only a very, very slight tendency to turn left on takeoff.

Now, just relaxing a bit at 6B0, before going shopping for some more repaints ........

 

[lucame]

Hi everybody,
as a lot of people I have a problem with a Milviz plane. I' ve downloaded the DHC 2 Beaver for FSX and when I launch the installer it asks for 11GB space !
I' ve put the folders in another disk and placed them manually in FSX.
Started the sim but during the loading of the flight appears the message " A fatal error..." with a CTD.
Does anybody have an idea to fix it?
Thanks a lot !!

 

[tgycgijoes]

Lots Of Repaints

Thank-you, @monk1 for the help. My initial install was done manually by pointing installer to folder on desktop. I don't think the installer could figure out what sim I had as it gave no options for FSX/P3D during install. I found an empty effects folder also. This would explain why I was missing a few things. After deleting everything I opted to use their installer as now I knew where things will end up in the sim folders. All installed OK now. After following your advice re the [flight_tuning] section, now the C310 flies like the Duke B60 with only a very, very slight tendency to turn left on takeoff.

Now, just relaxing a bit at 6B0, before going shopping for some more repaints ........

With a search for "Cessna 310" at AVSIM you will find lots of nice repaints for the Milviz 310 Redux. Mine works beautifully in FSX and DID install in P3D V4.5 but I actually like it better in FSX as far as the graphics. It is probably that P3D is brand new to me and I don't know how to set it optimally yet.

 

[Mike71]

MilViz Cessna 310R

In P3D4.5, an excellent plane overall, though I am not a fan of their built in lighting (daytime) and no matter where I search on the web or search the manual I cannot figure out how to turn on the damn cockpit lights on for night flying!

I see various references to a rheostat on the head liner trim, or the individual passenger lighting make it work, but clicking on any of them or the 4 screws on the wet compass does not work --???? Even opening the entrance door at night does not turn lighting on as it is supposed to do.

Anyone else solved this???

 

[Priller]

Anyone download and install the UH-1 Huey in FSXA?

Like a couple other downloads, the installer only provides for P3Dv3 and v4, so selecting P3Dv3 and pointing to the FSXA directory everything seems to install just fine. Only issue is that there are no doors or crew. If I use the MVAMS configuration setup I cannot toggle any of these, the hoist or weapons to show.

I attempted to uninstall are revisit for another day but couldn't remove the option for the Huey in MVAMS so I guess I'm stuck with a partial install for the moment.

Funny thing is that the website and install screen indicate its compatible for FSX. Even the User Guide PDF shows an install for FSX.

Any suggestions??

Make sure simconnect is installed in FSX: https://support.justflight.com/support/solutions/articles/17000100065-simconnect-files-for-fsx-p3d

And have a recent version of FSUIPC installed.

Priller

 

[monk1]

Thank-you, @monk1 for the help. My initial install was done manually by pointing installer to folder on desktop. I don't think the installer could figure out what sim I had as it gave no options for FSX/P3D during install. I found an empty effects folder also. This would explain why I was missing a few things. After deleting everything I opted to use their installer as now I knew where things will end up in the sim folders. All installed OK now. After following your advice re the [flight_tuning] section, now the C310 flies like the Duke B60 with only a very, very slight tendency to turn left on takeoff. Now, just relaxing a bit at 6B0, before going shopping for some more repaints ........

Glad it worked out for you. Nice screenshot!

 

[Mike71]

Make sure simconnect is installed in FSX: https://support.justflight.com/support/solutions/articles/17000100065-simconnect-files-for-fsx-p3d

And have a recent version of FSUIPC installed.

Priller

I do but will double check. Does yours work?

 

[MZee1960]

With a search for "Cessna 310" at AVSIM you will find lots of nice repaints for the Milviz 310 Redux. Mine works beautifully in FSX and DID install in P3D V4.5 but I actually like it better in FSX as far as the graphics. It is probably that P3D is brand new to me and I don't know how to set it optimally yet.

I run FSX SP1&2 Deluxe Ed (boxed CD) on my W7 desktop, and I think back when FSX first came out this was a 'sweet spot operating system' for it. I had a few hiccups back when this system was new, mostly from trusting installers to do everything 'the right way', but often I found many CTD's tied in to a new install, even after running the 'uninstaller' - remnants remained and these took a while to hunt down. So often I prefer a manual install, and knowing where what goes for easy control and removal if needed. Luckily Milviz is quite easy to track down as most ac files wind up in SimObjects and Effects folders if their installers are run, exception is MVAMS which ends up in Program Files. I find keeping FSX 'clean' is key to best functionality - remove unwanted, previously downloaded ac, keep tabs on gauge files so those can be removed when corresponding ac are, and of course making use of a few FSX config tweaks.

In P3D4.5, an excellent plane overall, though I am not a fan of their built in lighting (daytime) and no matter where I search on the web or search the manual I cannot figure out how to turn on the damn cockpit lights on for night flying!

I see various references to a rheostat on the head liner trim, or the individual passenger lighting make it work, but clicking on any of them or the 4 screws on the wet compass does not work --???? Even opening the entrance door at night does not turn lighting on as it is supposed to do.

Anyone else solved this???

Hi,
on the left hand side door panel where all the light toggle switches are, at the very front, find 4 knobs with white lines painted on them part-ways. Turn these knobs clockwise all the way ... you will see the instrument lights, navigation panel lights etc. all slowly brighten to full brightness. Also, best way to get some added VC lighting by the pilot/copilot seats is to turn on the back cabin lights by clicking the button on one of them and let some back cabin light into the cockpit area. I run FSX, but should be same in P3D. If still no lights, maybe try removing and re-installing. I had no anti-collision lights and rotating beacon light when I did manual install the first time. This was due to the fact that no effects were installed as installer didn't know if I had FSX or P3D when I manually pointed it to a blank folder on my desktop. The 2nd install, I did completely using the auto-installer, got the desired effects, my VC glass also seems less dark, and all is now operational. Milviz obviously uses lights tied to both the model and some to the effects files.

 

[PeteHam]

Many thanks to MILVIZ/Blackbird for your amazing gift to us.

I've finally got the Turbine Otter I was hoping to get early in January.

I was also hoping to get the PC-6 for FSX but I see it's only listed as for P3D v4 V5, does anyone know if that's also suitable for FSX.



Again many thanks for these wonderful aircraft.


Pete.

 

[erican2]

Hi everybody,
as a lot of people I have a problem with a Milviz plane. I' ve downloaded the DHC 2 Beaver for FSX and when I launch the installer it asks for 11GB space !
I' ve put the folders in another disk and placed them manually in FSX.
Started the sim but during the loading of the flight appears the message " A fatal error..." with a CTD.
Does anybody have an idea to fix it?
Thanks a lot !!

Did you run the MVAMS configuration tool first for the DH2?

 

[lucame]

Maybe not: I've tried so many times that I don't remember what I've done.
You mean launch FSX, then choose the plane ( DH2) and at last MAVS?

 

[erican2]

Run the configuration tool before loading up the plane in FSX for the first time.

Make sure your VC runtime files are up to date.

 

[alain0568]

Hello,

I confirm that the beaver is set up on 11.1GB !!!!
But, with each change of beaver, fsx blocks and plants !!!
I tried several times, and even result!
So I uninstalled with the Milviz installer, but there are 6 Beaver files representing 2.31 GB not deleted!
Really a shame!
I tried to install the Piper PA 30 also provided for FSX, but the installer only offers P3D!
I made a false P3D file to install and transfer the files in FSX, but it is impossible to display the model!
Shame!
(

Alain
-

 

[MZee1960]

Same here........ I also tried to DL the twin Comanche earlier. Said for FSX/P3D. Downloader only gave two P3D versions - no FSX. OK, tried to point installer to blank folder on desktop, all went OK. Copied all folder contents into FSX, and started FSX - got CTD. FSX could not find model to display (so obviously the model file was for P3D, not FSX). Also found none of the MVAMS files were there - something I think the auto-installer would probably have handled if allowed to run (and 'Desktop Shortcuts' option was checked). Glad I did this manually this time as all files were easily deleted and CTD's resolved immediately after file deletions. Moral is if it's for P3D, it won't work in FSX. I wish Milviz was just more transparent (accurate) if for FSX or P3D or both at the forefront - would greatly save time. They're great models, just wish they worked in FSX when advertised.

 

[WarHorse47]

I wish Milviz was just more transparent (accurate) if for FSX or P3D or both at the forefront - would greatly save time. They're great models, just wish they worked in FSX when advertised.

I couldn't agree more. It appears that many others on other forums are encountering the same issues. Don't get me wrong - I love their products (and thanks for the generous freebies), but I just can't tell what works in FSXA until you try to install it.

I have the UH-1 Huey they developed with Nemeth Designs, and was thinking about upgrading (?) to the Redux version so as to have a helo with tackpack. Although the freeware version (and manuals) indicate its FSX compatible, the installer only provides for P3Dv3 and v4. I was able to install and run their P3Dv3 version of the Beech Baron B55 into FSX successfully, so I tried the same with the Huey Redux. Nope. No joy. At least now I've learned how to remove the software from the MVAMS menu and interface.