PLUTO16
Charter Member
A very nice repaint..But historically incorrect. The livery you did is a CF-104,the cockpit layout is completely different from the "G" version.
-
There seems to be an uptick in Political comments in recent months. Those of us who are long time members of the site know that Political and Religious content has been banned for years. Nothing has changed. Please leave all political and religious comments out of the forums.
If you recently joined the forums you were not presented with this restriction in the terms of service. This was due to a conversion error when we went from vBulletin to Xenforo. We have updated our terms of service to reflect these corrections.
Please note any post refering to a politician will be considered political even if it is intended to be humor. Our experience is these topics have a way of dividing the forums and causing deep resentment among members. It is a poison to the community. We appreciate compliance with the rules.
The Staff of SOH
SSW Models
- Thread starter andrea6811
- Start date
- Status
A very nice repaint..But historically incorrect. The livery you did is a CF-104,the cockpit layout is completely different from the "G" version.
ZsoltB
Charter Member
Thank you my Friend
Then why do I see a CF733 folder in the SSW F-104G package?
If I remember correctly, you have forgotten your the beacon light (G model)
It does not incorrect?
DaveB
Charter Member
Sometimes, you have to go with what you've got Pluto
I've often bought models I wouldn't otherwise have bought because of the repaints available. While not for the purist.. I think this is much better than putting a BA/BOAC livery on a Tupolev! That's a paint too far
ATB
DaveB
PLUTO16
Charter Member
Ok,we left the "canadian patch" to our VAAFSE purposes,due to some users that use this livery in multiplayer effort (is a "controlled mistake" and you have to edit the aircraft.cfg to use it).
Could you please be so patient to explain the problems with lightning system of the zipper?
By the way...some extra....SSW Tornado IDS work in progress:
Bye,Ale
Could you please be so patient to explain the problems with lightning system of the zipper?
By the way...some extra....SSW Tornado IDS work in progress:
Bye,Ale
PLUTO16
Charter Member
Sometimes, you have to go with what you've got Pluto
ATB
DaveB
Sure it is!!
odourboy
SOH-CM-2020
odourboy
SOH-CM-2020
Nice! Is this available anywhere for download?
ZsoltB
Charter Member
Btw Id like to raport two next bugs in F-84F. Wrong thumbnail and textures problem in one model (SOLO, Ten pack).
Default installation of 1.4 v from SSW Store.
Yoyo...
as said at the beginning of the thread...for the too dark looking texture the problem is in the texture.cfg
open the texture .cfg of the folder texture.5822, there are wrong entries..
these are the correct ones
[fltsim]
fallback.1=..\..\..\SSW-F84F-TEXTURES\fuselage.5822
fallback.2=..\..\..\SSW-F84F-TEXTURES\fuselage.common
fallback.3=..\..\..\SSW-F84F-TEXTURES\fuselage.bumpspec.common
fallback.4=..\..\..\SSW-F84F-TEXTURES\cockpit.common
We will correct the thumbnail in the next version
Some news about the landing gear....the problem is about the key accelerator you use for the landing gear. There is no problem n the internal or external model if you use the default toggle Key (G)..but there is the problem (only in the internal model) if you use the two key events "landing Gear UP" or "Landing Gear Down"...we will correct it , into the next version...
Regards the shacking, we have found a solution, and we are testing it......when it will be ready, I think that we will made a little patch to correct also others minor bugs
Regards
Emanuele
DaveQ
Charter Member
Earlier in this thread I said I thought this was mine - many apologies, it's not. I did publish a repaint of 'Boots IV' but this isn't it. I'm sure Alessandro has done his own with his usual great skill!
DaveQ
YoYo
SOH-CM-2023
Some news about the landing gear....the problem is about the key accelerator you use for the landing gear. There is no problem n the internal or external model if you use the default toggle Key (G)..but there is the problem (only in the internal model) if you use the two key events "landing Gear UP" or "Landing Gear Down"...we will correct it , into the next version...
Regards the shacking, we have found a solution, and we are testing it......when it will be ready, I think that we will made a little patch to correct also others minor bugs
Regards
Emanuele
Very, very great news!
I can be a beta tester of this
.
Wings of Gold
Charter Member
When to defuel
Emanuele, Please let me ask one last question:
My notes on my F-84F state that I should "Change fuel load (Alt key etc.) ONLY after the aircraft is loaded up". I have been all through my SSW documents - and can not find anything about changing fuel before (or after) Initializing with SSW. Is this true that I should only change fuel load after Initialization (or can I change fuel load during it's FSX selection)? Is this also true with my F-104G and F-104S?
Best regards, Bill
Emanuele, Please let me ask one last question:
My notes on my F-84F state that I should "Change fuel load (Alt key etc.) ONLY after the aircraft is loaded up". I have been all through my SSW documents - and can not find anything about changing fuel before (or after) Initializing with SSW. Is this true that I should only change fuel load after Initialization (or can I change fuel load during it's FSX selection)? Is this also true with my F-104G and F-104S?
Best regards, Bill
Hi Bill,
to change fuel in all our models you have to use the dedicated panel configurator (the one you can use to add weapons, tanks etc)...there you can refuel or empty the fuel tanks. I suggest to do not touce the fuel and payload configurator of FSX, because it can cause malfunctions
Best regards
Emanuele
Hi Pluto12
I have just got your F-104G model, and it sure is an interesting plane to fly.
The plane should be correctly activated, and I have had it airborne a few times.
However I have this this problem on start up, that sometimes the lady says the plane is initialized and I am ready to go.
But mostly she says, the plane it NOT initialized, please do it manually.
What is causing this, and how do I eventually initialize this thing manually?
Best regards Soeren
I have just got your F-104G model, and it sure is an interesting plane to fly.
The plane should be correctly activated, and I have had it airborne a few times.
However I have this this problem on start up, that sometimes the lady says the plane is initialized and I am ready to go.
But mostly she says, the plane it NOT initialized, please do it manually.
What is causing this, and how do I eventually initialize this thing manually?
Best regards Soeren
Hi Pluto12
I have just got your F-104G model, and it sure is an interesting plane to fly.
The plane should be correctly activated, and I have had it airborne a few times.
However I have this this problem on start up, that sometimes the lady says the plane is initialized and I am ready to go.
But mostly she says, the plane it NOT initialized, please do it manually.
What is causing this, and how do I eventually initialize this thing manually?
Best regards Soeren
Hi Soeren
if the model is not activated you will have a CTD..or the sim will go into pause if the key become invalid...so I think that all is correct.
The problem about initilization depends in How you close the simulation the last time you use it. Normally FSX load at start up the default flight....you can change the aircraft and all the other things, but the system status (engine, elctrical..etc) is loaded from the default flight.
I can suggest to load the the money bravo.....to shut it down...avionics off..battery off etc.....wait about 30 seconds and save that condition/flight as default flight.
Then try to load the Zipper and all should be ok without problem.
By the way, you can manually initialize the airplane with the button on the weapon configurator panel (I think Shift-2)...if you open it, there is a yellow button for the manual initialization...click on it, and wait for the beatching Betty
Hope this helps
Regards
Emanuele
Hi Soeren
if the model is not activated you will have a CTD..or the sim will go into pause if the key become invalid...so I think that all is correct.
The problem about initilization depends in How you close the simulation the last time you use it. Normally FSX load at start up the default flight....you can change the aircraft and all the other things, but the system status (engine, elctrical..etc) is loaded from the default flight.
I can suggest to load the the money bravo.....to shut it down...avionics off..battery off etc.....wait about 30 seconds and save that condition/flight as default flight.
Then try to load the Zipper and all should be ok without problem.
By the way, you can manually initialize the airplane with the button on the weapon configurator panel (I think Shift-2)...if you open it, there is a yellow button for the manual initialization...click on it, and wait for the beatching Betty
Hope this helps
Regards
Emanuele
Thankyou very much Pluto12.
That did the trick. It must be loaded after one of the native P3D planes have been loaded as the default plane.
Happy customer
Soeren
- Status