Hawker Sea Hawk P3D FSX 10_16

One more for the collection.. WV824 122-C 801NAS HMS Centaur '59-'60..

wv824ss1.jpg


Available HERE

The usual T&C's apply;)

Wouldn't it be great if we had HMS Eagle, HMS Centaur, HMS Albion and HMS Bulwark. Throw Hermes in there for good measure!
ATB
DaveB:)
 
A bit sad that we dont have any royal navy carriers which actually flew sea hawks (the flying stations ark model shows a the very different ark than how it looked with sea hawks) in fsx/p3d. Did the sea hawk fly from any of the straight deck carriers?
 
It's service life wasn't long. I looked hard today to find any shots of one on Victorious before I realised that Vic was in extended refit from '50-'58 which covered (pretty much) the period Sea Hawks were at sea. They served on all the carriers I listed above.. neither Centaur, Bulwark or Albion had much of an angle (if any).. it was all in the deck paint!!:biggrin-new:

ATB
DaveB:)
 
Cees Donker said:
Thanks Dave, I thought so too. This one puzzles me.


Cees
Click to expand...

Yes mate.. there are the odd few which use custom fonts and why.. I've absolutely no idea. A few I did for the Scimitar were the similar (as in odd) and for these, I had to find the closest font and merge letters then hand draw in the bits (side number 154 springs to mind.. there's no font on earth like that!!).

ATB
DaveB:)
 
JensOle said:
A bit sad that we dont have any royal navy carriers which actually flew sea hawks (the flying stations ark model shows a the very different ark than how it looked with sea hawks) in fsx/p3d. Did the sea hawk fly from any of the straight deck carriers?
Click to expand...

I'm planning to make a version of the Hr. Ms. Karel Doorman. I'm using FSDS 3.51. I managed to make a test version (two squares) with a landable deck. What I can't do in the model is incorporate arrestor cables. maybe someone here knows how to do that? Perhaps With ModelConverterX? I ordered a book about the Hr. Ms. Karel Doorman. This will take considerable time to complete.....But I made ships before!


Cees
 
Adding arrestor cables is not as difficult as you'd think. It's something of an 'unwritten rule' but does work. I recently added wires to a ratty model of Hermes I have and they work!!:very_drunk:

Add them to the model in MCX as effects (first selection.. can't remember what it's called off the top of my head).. then line each one up where it needs to be (you can see it in MCX like any other effect). For example, most carriers have 4 wires so you start on one side (port) and add the line attachpt_cable_1_1. Call the effect this even though you can't actually select the effect. Then on the stbd side.. add attachpt_cable_1_2 (placing it exactly using MCX). Move on to the next wire (add effect) and call the effect attachpt_cable_2_1 in exactly the same way followed by attachpt_cable_2_2 then 3_1 then 3_2 and finally 4_1 and 4_2. Left, right, left, right e t c.

ATB
DaveB:)
 
Cees.. it wasn't Hermes, it was HMS Campania.. a CFS2 escort carrier I converted. It needed a hard deck first then the shot below shows how I added the wires. With attached object editor open, I think I selected ADD/'Empty' then typed the attach points into the effect name pane on the RH side. Hopefully, the screenie will show what I mean.

arrcables.jpg


ATB
DaveB:)
 
Yes matey:encouragement: I didn't bother with cats on the Campania as everything that lands on it doesn't need help getting off again!! There's one entry I'm not sure of and that's the angle of the effect/attachpt. I checked out numerous carriers to see what they used and believe it or not, the vast majority don't have any angle entry at all:dizzy: So.. I'd just go for the bottom line entries (L/R.. Fwd/Aft.. Up/Down).

I believed for a long time that it was a black art known only by a select few of the inner sanctum but in reality.. it's as simple as adding a light or wake effect:encouragement:

ATB
DaveB:)
 
Hi Guys,
Have just about finished a RNLAF paint of a 3 Squadron aircraft embarked on KD. I can find no Squadron badge details so cannot put one on! Does anyone know if they had a badge? Will not release until comments have been received!



:ernaehrung004: Peter
 
Nice one Peter:encouragement:

Here's a lazy paint from me.. WF159. No Sqn markings as it was still under CS(A) control Jan-Sep '53. What it DOES mean is that you can go anywhere in it!!
wf159ss1.jpg


wf159ss2.jpg


Available HERE

I've had a quick go at the droptanks on this one (something I admit I'd not looked at until WV824:122-C). 122's tanks match the white underside much better and likewise.. the tanks with WF159 match the sky underside. Rob's originals didn't match anything!

The usual T&C's apply.
ATB
DaveB:)
 
Last edited:
I have talked with Lazarus and he is planning to revisit the Majestic class and rework/update the model. It might also include a dedicated Karel Doorman/Minas Gerais model with the new island and deck.

Looking forward to see your work Cees!

Dave B; A Centaur class carrier would have been something! It would fit more or less any post war FAA jet up to the Phantom. Maybe just scale up the Majestic and make two cats :)

Amazing how narrow even the big Ark Royal was before the Phantom modification, the angled deck was just 5.5 degrees!
 
Agree.. and 5.5deg is a mere bulge on the side.. nothing like the 7deg on Hermes (or was it 8?). We have so many aircraft that would fit this class, its a shame we don't have the carriers to use them on:( Maybe Lazarus can rustle something up from the Majestics..

ATB
DaveB:)
 
I have been thinking about the idea of painting up Victorious as Hermes. Some similarities with the angle of the deck and big search radar until we get something dedicated..
 
That's not a bad idea:encouragement:

Oh.. Hermes deck was 6.5deg according to Janes Fighting Ships '73/'74. Ark had a whopping 8.5deg angle!!

I had a go (another go) at painting up a re-engineered Hermes this afternoon and the results were less than satisfactory. The deck map is wild as well as off-centre!!:dizzy:

EDIT: Thinking about it, the deck park models would need to be repainted too so a Vic repaint would be rather more of a challenge. Easier (I think) to make the Majestic's look like Centaur's by painting the angle on the deck.
ATB
DaveB;)
 
You must log in or register to reply here.
Back
Top